Why FileIO vi adds a line empty after installation?

Similar Questions

• How to remove a line empty after an anchor of the table?

  We use FrameMaker 12 on Windows 7 (64-bit) platform.

  I'm working my way down to a chapter in the content of the training. I'm at halfway in the chapter, and - as fate would have - I need start a table at the top of a page.

  When I insert a table (with a caption/title at the top), FM creates an anchor at the top of the page. The space to the right of the anchor is a blank line.  In fact, I want the table to start at the top of the page without the white line to the right of the anchor.

  That's what I tried, with results:

  I put the cursor after the anchor and press DELETE.

  Result: The text * under * the table is set up above the table.

  I put the cursor after the last piece of text on the previous page and press DELETE.

  Result: The paragraph on the previous page Stoops to the next page on the top of the table, leaving a large empty space on the previous page.

  I change the start option (Table Designer) at the top of the column (or the top of the Page).

  Result: FM leaves the anchor where she was, move the table until the next page and leaves a completely blank page where the table used to be.

  Is it possible to just go up the table so that it is on the same line as the anchor?

  (And as a design tool problem, is there ALWAYS a reason why a content developer wants a complete line of vacuum over a table?)

  Thank you in advance,

  
  Tim

  Assuming that your para anchor has a spacing of X:

  • In the Paragraph Designer set it for tea by anchor, base: space: below the FMP: -x
  • In the table designer for the table, set the base: space: above: -x

  >... it NEVER is a reason why a content developer wants a complete line of vacuum over a table?

  A series of tables not run-together, sure. But the hack of negative space above there are quite often do suggests a design control.

• How to add a line empty

  Hello

  I know this is very basic, I ask, but I'm going crazy trying to find it.

  I want to draw a blank line between to LabelFieds.

  Something like:

  Label1

  Label2.

  I know there is a function that does this, but I can't remember it and I am not able to find it in google.

  Thank you!

  VFM. Add (new SeparatorField (Field.NON_FOCUSABLE));

• Why can't I retrieve my favorites after installation of new Firefox blank even though I have the key to the synchronization?

  Before I Change my old BONES, I created an account on Firefox Sync to save my favorites, after the installation of the new operating system windows 8.1 specifically and configure Firefox new Virgin "29.0.1", and then try to recover my data using my sync key that I understand that I can not because the system has changed, please I need support immediately.

  To access the data stored using the old version of synchronization, you must install a version of Firefox 28 and restore your data from the server.
  After doing this, you can upgrade to Firefox 29.0.1 and use the new synchronization version.

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/28.0/

  See also:

  • https://support.Mozilla.org/KB/how-to-update-to-the-new-Firefox-sync

• The browser window is empty after installation, no button or the view menu. Homepage is just a black background. What has gone wrong?

  Just upgraded to Firefox 33. Using Windows 7 Enterprise, 32-bit edition.

  Found answer to my problem in the thread here:
  https://support.Mozilla.org/en-us/questions/1025438

• Add line button adds three lines (not one)

  In the report of Dropbox form - UNIFORM - (04) .pdf there are two tables. The two tables have a single button "add a line". In the table at the top of the page, click it once actually adds three lines (not one, as it should be). In the second table, it works as it should (by adding only one line). However, for the life of me, I can't understand why.

  The upper table using this code:

  Form1. #subform [0]. SUB_of_Table1.Table1.HeaderRow.Subform3.AddButton::click - (JavaScript, client)

  Table1._Row1.addInstance (true);

  The bottom table using this code:

  Form1. #subform [0]. SUB_of_Table2.table2.HeaderRow.Subform2.AddButton::click - (JavaScript, client)

  Table2._Row1.addInstance (true);

  Except for a form of corruption of document, I can't begin to guess why the top adds three lines, but inside only one. It drives me crazy.

  No, it doesn't always work does not, try to use Gmail drive share or send me a private message and I'll give you my email.

• V9 Acrobat JavaScript Alert Box - possible to add space or line break after each element of the array?

  I have a Document level Javascript used to identify empty mandatory fields and fires on shares of paper, print and save. The script identifies the required fields empty, counties and outputs of an alert box indicating the number of required fields empty and lists the name of the ToolTip fields. The script identifies the required fields with an asterisk at the end of each balloon.

  Is my question possible to add a space or a line break after the decimal point for each item?

  Here is a picture of the exit where the items listed are all grouped together.

  

  Here is the code:

  function validateFields()

  {

  a counter for the number of empty fields

  var = 0 flg

  count all the fields of the form

  var n = this.numFields

  create a table to contain the names of the required fields

  If they are determined to be empty

  fArr var = new Array();

  Browse all fields and look for ones that are required

  all fields that have a ' *' in their ToolTip are required

  for (var i = 0; i < n; i ++) {}

  var fn = this.getNthFieldName (i);

  var f = this.getField (fn);

  ToolTip is the property of 'userName' of the fields\;

  TT = f.userName var

  test the ' *';

  If (TT. IndexOf('*')

  ! =-1 & & f.value == f.defaultValue) {}

  increment the counter of empty fields;

  FLG ++;

  Add the fields username (ToolTip) to the list of the names of fields empty.

  fArr [fArr.length] = tt;

  }

  }

  now display a message if there are blank fields

  if(FLG>0) {}

  App.Alert ("there are '+ flg + areas that require a value\n\n' + fArr, 3")

  }

  else {}

  This.Print ();

  }

  }

  The required property is very easy to use. It's just a Boolean (true/false) value, then you can use it like this in your code. Instead of this line:

  If (tt.indexOf('*')! =-1 & f.value == f.defaultValue) {}

  Use this:

  If (f.required == true & f.value == f.defaultValue) {}

• Add a line of empty in a table when the checkbox enabled

  Hi all

  I have a custom page with 2 check boxes and a few fields, I do the operation of research by entering a check mark and a few other fields and display data in the table region.

  My requirement is when I select the second check box and click a button, such as add new line it must create an empty row in the table, means table should available with an empty line so that the user can insert data.

  Please help me on this

  Thnaks

  Hello

  If you work with the advance table so you have a default option to create a blank line, please through the topic "add another line."

  Jdev Guide.

  If you work the ordinary table area, then you can follow the below proposed code.

  Create a new item of type button (no submit button) and handle the event in your controller class PFR

  String addRow = pageContext.getParameter (EVENT_PARAM);   "addRow" is an event attached to table

  If ("addAnotherRow". Equals (AddRow))

  {

  am.invokeMethod ("AddRow");

  }

  In the AMimplementation class:

  Public Sub::AddRow()

  {

  OAViewObject headerVO = (OAViewObject) getsdaPacelineWorkupHeaderUpdateVO1 ();

  rowh = (sdaPacelineWorkupHeaderUpdateVORowImpl) headerVO.getCurrentRow () sdaPacelineWorkupHeaderUpdateVORowImpl;

  rowh.getPacelineHeaderId ();

  OAViewObject lineVO = (OAViewObject) getsdaPacelineWorkupLineUpdateVO1 ();

  Line lineRow = lineVO.createRow ();

  LineRo row = lineVO.last ();

  lineRow.setAttribute ("PacelineHeaderId", rowh.getPacelineHeaderId ());

  lineRow.setNewRowState (Row.STATUS_INITIALIZED);

  lineVO.last ();

  lineVO.next ();

  lineVO.insertRow (lineRow);

  lineVO.setCurrentRow (lineRow);

  lineVO.setCurrentRow (lineVO.last ());

  }

  Note : replace your name instead of sdaPacelineWorkupHeaderUpdateVO1() vo

  Please let me know if you have any questions.

  Kind regards

  Had

• Why can I add is no longer a line to an embedded image?

  I used Illustrator for years but now I need help.

  I placed a few JPEG files in Illustrator (they are integrated without link). I used to be able to click on the line and add one, but now I can't, it won't work even if I add a line via the menu appearance. Is there another way?

  Thank you!

  Add a line through the appearance Panel and then run add effect > path > outline object

• tabular: Add the line: line does not get inserted

  Hi all

  I have a tabular presentation based on a products table, quantity, unit_price and product_id columns

  in the form of Tha also has a calculated field price (unit_price * amount) and a total on the price column

  When the user changes unit_price or quantity, the price is calculated together total whith, this is done using javascript

  I want to accomplish is add when you click line, and then the total row of the report should remain the last row

  I managed to do it, but when I add a line and then fill in the same row is ignored by apex, 0 rows inserted

  This is because when you change a field in the hidden input field fcud_xxxx does not change to would be "to 'C'

  How can I fix this, I have to write a change event for each column?

  any other ideas?

  I put the code on apex.oracle.com

  workspace: martijnke

  login/password: demo/demo

  application: 78396: apex advance

  Start the application and click orders, and then click on any order to go to the edit page 4 control elements

  Click Add line and see what happens

  the javascript code is on page 4, the function is called switch_last_row()

  I found this in widget.tabular.js:

     // Register change handler on new row form fields, change "fcud_*" hidden element to C if a change occurs
          lNewRowIndex = tabular.pad( ( tabular.gNumRows + tabular.gNewRows ), 4 );
          $( ":input[id^=f][id$=_" + lNewRowIndex + "]", apex.gPageContext$ ).change( function() {
              $( "#fcud_" + lNewRowIndex, apex.gPageContext$).val( "C" );
          });
  

  Why change this event not working for my vacuum dial-up?

  DB: 11 GR 2

  Apex 5.0.2

  KR

  Martin

  Martijnke wrote:

  I have a tabular presentation based on a products table, quantity, unit_price and product_id columns

  in the form of Tha also has a calculated field price (unit_price * amount) and a total on the price column

  When the user changes unit_price or quantity, the price is calculated together total whith, this is done using javascript

  I want to accomplish is add when you click line, and then the total row of the report should remain the last row

  I managed to do it, but when I add a line and then fill in the same row is ignored by apex, 0 rows inserted

  This is because when you change a field in the hidden input field fcud_xxxx does not change to would be "to 'C'

  How can I fix this, I have to write a change event for each column?

  any other ideas?

  I put the code on apex.oracle.com

  workspace: martijnke

  login/password: demo/demo

  application: 78396: apex advance

  Thanks for the creation of the example. Makes it so much easier to understand the problem and to work there.

  Start the application and click orders, and then click on any order to go to the edit page 4 control elements

  Click Add line and see what happens

  the javascript code is on page 4, the function is called switch_last_row()

  I found this in widget.tabular.js:

  1. Sign change on the form fields Manager new line, change "fcud_ *" element hidden C if a change occurs
  2. lNewRowIndex = tabular.pad ((tabular.gNumRows + tabular.gNewRows), 4);
  3. $(«: entrée [id ^ = f] [id$ = _ » + lNewRowIndex + «]», apex.gPageContext$) .change (function() {}
  4. $(«_#fcud__»_+_lNewRowIndex,_apex.gPageContext$).val ('C');
  5. });

  Why change this event not working for my vacuum dial-up?

  It does not work because the use of the method. html() in this function replaces the DOM elements these managers events are related to the:

  function switch_last_row(){
        var l_total =  $('td[headers="CHECK$01"] b').parent().parent().html();
    var l_last = $('td[headers="CHECK$01"]');
    var count = l_last.length;
    //$('td[headers="CHECK$01"] b').parent().parent().html(l_last[count - 1].innerHTML);
    var v_html = $(l_last[$('td[headers="CHECK$01"]').length - 1]).parent().html();
        //alert(l_total);
        //alert(v_html);
        $(l_last[count - 1]).parent().html(l_total);
        $(l_last[count - 2]).parent().html(v_html);
  }
  

  Event managers are left intact by using an approach much more simple that moves the total line node below the newly added in the DOM instead of exchanging their content:

  function switch_last_row() {
    var totalRow = $('td[headers="CHECK$01"] b').closest('tr');
    totalRow.next().after(totalRow);
  }
  

  I created a demonstration of this in page 4 a new application in your workspace. However, this leads to a number of other problems. As I'm not sure of the magnitude that these additional questions were present or planned in the original, I left things to this page 4 and started from scratch on pages 586 and 587. In general, the JS code in the example seems to be too procedural. It does not entirely the ability to work at a higher level of abstraction using jQuery (' write less do more ") and the DOM objects. Doing this, in conjunction with dynamic actions APEX gives more compact code, better separation of concerns and an application that is much easier to debug and maintain. Compare the use of the CSS level page and unique dynamic action to bind several columns of report versus change events manually adding/changing the attributes of style event and online at the column level.

• Add new line of vacuum for ePub Using Adobe InDesign CS5.5

  Hello

  I am new to ePub, I test ePub to see the possubilities and made a lot of success.

  I am facing a problem I don't know how to do.

  I need to creat empty new line betwwn the title and the body of the text, I know that the more difficult is to make an image for the title and other chassis for the body, it will take a lot of time to complete the book.

  I tried to add blank lines with the button Enter on my keyboard, but does not work.

  Thanks in advance

  Less familiar with CSS than Bob does, I managed by defining a paragraph style for the title that has a large amount of the space below.

  While white space (returns, etc.) is ignored when InDesign generates the CSS, styles of paragraph with space before and after are converted into equivalent CSS settings.

• Why when I add my account in Itunes gift certificates is blocked and request to change password

  Why when I add my account in Itunes gift certificates is blocked and request to change password

  Hey there Colin.

  It seems that redeem you a code of content or gift card to your iTunes account, but for some reason any you got an error message on your account. If the message you received was being given with the account be locked for security reasons, so this article has more information on what means:

  If your identifier Apple is locked

  If your identifier Apple is blocked for security reasons, you may experience one of these alerts:

  • "This identifier Apple has been disabled for security reasons".
  • "You cannot sign in because your account has been disabled for security reasons."
  • "This identifier Apple has been locked for security reasons.

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After several unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  If you use the two-step verification, you must use your recovery key and trust device. And if you use two-factor authentication, you need a trusted device or a reliable phone number to unlock your Apple ID.

  If you see a message which differs by alerts above and you can't reset your password, contact us for assistance.

  If it's not the error you have found, can you please developed with the exact message verbiage that you receive? Thank you for using communities of Apple Support, all the best!

• App store is empty after that iOS 9 update on iphone 5 c.  Already tried to set a date.  Any suggestions?

  App store is empty after updating iOS on iphone 5 c 9.0.2.  Already tried the suggestion of setting a date.  Still a Virgin.  Ideas?

  Djrash,

  Why not try a hard reset if you have not already. This, now the "home" button and the power button / stop key at the same time until you see the apple logo. I hope this helps! If no answer.

  Thank you!

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• [ADF, JDev12.1.3] Why the content of a line in my af:table disappears when I select a new line?

  Hallo,

  I created an af:table like this https://community.oracle.com/servlet/JiveServlet/downloadImage/2-12620067-7140/cmnt1.png following the advice that the kind has been suggested to me by Ashish (for details, see [ADF, JDev 12.1.3] how to display multiple records on the same page... not in a table, but display a form for each record)

  When the table is loaded for the first time, it appears correctly.

  But often (not always) when I select a new line, the selected line up to become "white" and its content disappears http://digilander.libero.it/flattit82/OTN_FILES/rowDisappearing.png

  This product especially if I change the value of 1 or 2 fields contained in the line.

  If I select several lines - one after the other one - the part visible AF: table may become totally white.

  Looks like a refresh problem.

  The table is in a tab.

  If I switch to the tab, then I it again once the table appears again correctly.

  Another thing I noticed: for example 2 rows have disappeared, I select an end of line I have empty in a required field: when I select another line, the popup "this field is required" appears in the row selected previously and magically all the missing lines are coming back!

  The problem seems to be less frequent if I set the selection table = none... but it is always present.

  You could you kindly help me to solve this problem?

  Thank you

  Federico

  Hi Federico

  See I've made a few changes in your application, this problem is due to your provision

  as there are a lot of line of the grid, groups, I simple used Panel of and provision of group only

  Download the Application

  Thank you