Why Firefox tells me "another program is using the file" 1 hour after the update of Firefox, when I click on the desktop icon?

Similar Questions

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• When I click on a desktop icon top of page, open with. opens with a list of programs. How can I get rid of this pop up - thank you.

  WHEN I CLICK LEFT ON AN ICON ON MY DESKTOP. 'OPEN WITH' APPEARS WITH A LIST OF MANY PROGRAMS. HOW CAN I GET RID OF THIS POP UP?

  PLEASE HELP - AND I YOU THANK JOAN

  Hi Joanarchdeacon,

  It may be a problem with your file association.  About how to resolve this problem, see the following article:

  http://support.Microsoft.com/kb/950505

  I hope this helps!

• Center help and Support using the desktop icon

  Office a700y Windows XP - pro. A new ' 05. Just tried to get thru to HP tech using the icon on the desktop for the help and support center. The only way to get thru is signon line through windows or msn. Try not to use a HP Application Recovery no chance.

  Click the icon on desktop-open HP help and Support center-Connect customer support - start a new request - fill out form - click on connect to a support analyst - I get a window showing the connection to the server required /HP Flash support is currently available try again later. Also tried services.msc/ru7n also HHCTRL. OCX/execute without result. Was on I / M with HP tech does support for 2 hours no luck with them to all the

  HopeIn' for some ideas

  Well, it seems that the HP program help and support is no longer supported for desktop computers. They always have for computers laptops/notebooks. Read to the bottom of the web page. Sorry to be the bearer of bad news.

• verification of the shadows down using the desktop icon labels works not

  in windows xp, I tried to remove the shadow around the label of the icon and the mycomputer, properties, advanced, settings, dropshadows to use icon on the desktop check box labels don't market not delete.

  in windows xp, I tried to remove the shadow around the label of the icon and the mycomputer, properties, advanced, settings, dropshadows to use icon on the desktop check box labels don't market not delete.

  http://www.TomsHardware.com/Forum/25340-45-unable-remove-shadow-desktop-icons-Windows

• When I click on a desktop icon, I get a message "cannot open this shortcut Internet. The "https" Protocol does not have a registered program"

  This occurred after a new graphics card to distance was downloaded from Dell technical support

  The 'Default programs' tool has solved the problem. See:

  How to fix error of HTTP protocol does not have a program recorded at the opening of the Internet shortcuts:
  http://www.Winhelponline.com/blog/fix-error-Protocol-HTTP-registered-program-Internet-shortcuts/

  This solves https thus the protocol settings.

• The desktop icons not working not not & programs does not properly

  I got pop ups from Windows Vista, which indicates that 33 files were infected and I could download Vista Security (or something like that).  I have McAfee I chose to leave warnings.  McAfee has run several full virus scans and found none of the 33 listed viruses.  However, none of my icons on my desktop works and I get error messages when I try to open Excel, Quickbooks and I keep having to select a program to open these files.  What should I do?

  If I click on any desktop icon, I am invited to a screen that asks me to "choose the program you want to open this file".  I've recently updated for Internet Explorer 9, but this has been done because by clicking the Internet Explorer icon on my desk gave me the above message.  Basically, what I do to have my computer function normally (i.e. be able to use the icons on the desktop).  Can I have a virus?  McAfee, seems to indicate that I don't have.  All of this started happening when I received a message from Windows Vista stating that I had a virus on my computer.  Initially, I refused to buy the virus scan software because I have already and I thought it was a thing of sale.  Thanks for any info you can give me.  It's very frustrating, especially if I lose my data from office.

  Hello

  Vista did not notify you what let it be

  which is Malware

  read this all what is called 'Vista-security etc' programs and follow the steps

  Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

  Windows XP rogue names	Names of Windows Vista Rogue	Windows 7 fake names
  XP Antivirus	Vista anti-virus	Win 7 antivirus
  XP Antivirus 2011	Vista anti-virus 2011	Win 7 anti-virus 2011
  XP Anti-Spyware	Vista Anti-Spyware	Win 7 AntiSpyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 antispyware 2011
  XP Home Security	Vista Home Security	Win 7 Home Security
  XP Security 2011 Home	Vista Security 2011 Home	Win 7 Security 2011 Home
  XP Total Security	Vista Total Security	Win 7 Security Total
  XP Security 2011 Total	Vista Total Security 2011	Win 7 Security 2011 Total
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011

  Follow the EXACT below removal instructions

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

• Why can't I open any of my applications from the desktop icons or the upper toolbar of office?

  I am currently unable to open or activate all files or programs when I click on my desktop icons, the same problem occurs with the icons in the top toolbar of office. It also seems that the upper toolbar of office disappear when I shut down the computer and I have to right click in the toolbar the "tick" show toolbar.

  The only way I am able to access one of my programs IE: e-mail, internet, etc. is to right click and select 'open '.
  Recently, I installed PC Optimizer Pro and believe that these problems occurred only since this installation. I could be a coincidence though.
  Can you help me please?

  Hello

  PCOptimizerPro, alias PC Optimizer Pro (other) is classified as Malware.

  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=program%3aWin32%2fPCOptimizerPro

  "Program: Win32 / PCOptimizerPro is a program which is presented as a tool for optimization of system." Some versions of this program may display misleading or fraudulent claims on files, registry or other components on the system. These versions are detected by the security of Microsoft products. »

   

  You don't say what operating system you use, but the steps are similar for XP, Vista, etc.

  Search for malicious software. If the installation, update and analysis is stopped, do in Mode safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• The desktop icon can not find the program

  I'm having a problem where when I click on my desktop icons they can not find the program that is associated with run.

  Most of them is related to sites Web that I often use, so I select Internet Explorer as the associated program then remember this radio button, but when I connect and get back in that I get the same error.

  I am running windows XP, I say this because I've posted this before, and I referred to a difficulty which will not work with this operating system.

  Any help would be appreciated.

  Hello JoseVasquez,

  Try the automatic solution of the following article:

  Article ID: 307859 - how to change or choose which program starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859
   
  This should help to restore default associations in Windows XP.

  Thank you

  Marilyn

• Why I am constantly a message saying that another program has changed the metadata?

  I get all the time on the images. I've never used other programs. And I can't find a way to each work on why I get the message. Also, I don't know whether to choose settings to import from disk or to replace the settings because I have not actually used another program. To add to the problem, I can't find a way to add a response to all of the photos at once and thousands seem to be affected. Ideas anyone? Windows 7, just upgraded to 6 of Lightroom, but it happened with Lightroom 3, 4 and 5 as well.
  

  You use Bridge or Adobe Camera RAW?

  If you use another program other than the latest version of LR, LR 3,4 and 5.

  Choose a version of LR and stick to it. Then once you know that you have all of your presets and other custom settings carried over to LR 6, you must uninstall at least versions 3 and 4

  You can select all the images made and click on the exclamation mark (!) in one of them. You must select in the grid view not in the film strip to apply the changes to all of those at once.

• Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution?

  Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution? Tried all the easy fixes.  IMAP burning is on auto. (services.msc) what's next?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. What is the full and exact error message?
  4 have. what troubleshooting steps you tried?

  (1) check that the CD burner is properly connected.
  (2) wipe the drive and check that it is not damaged.
  (3) try a different brand of blank discs.
  (4) if another program is currently burning files on the CD, wait for the burning process is finished.
  (5) quit other programs that may be using the CD burner.
  (6) restart Windows Media Player.
  7-restart your computer.
  (8) try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/
  (9) uninstall all third-party CD/DVD burning software and check.
  http://support.Microsoft.com/kb/307895

• Why do I reactive CS6 whenever I use the program?

  Why should I reactive CS6 whenever I use the program?

  Hi matiasp27326841,

  You suggest to refer to this article and make sure that you don't have the proxy settings or Adobe in the hosts file:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Kind regards

  Claes

• I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  It is possible that you downloaded the demo of creative cloud of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, it doesn't bother your catalog, preferences and personal files.

  Download the appropriate version from the link below and install them, your license key is accepted and everything will be fine.

  Updates

• How to make a lock off the internet so I can have another WiFi computer using the internet

  How to make a lock off the internet so I can have another WiFi computer using the internet

  you do not take the lock itself.

  Instead, you configure another computer with security information to access the connection Wireless secure.

  Unfortunately, we cannot help you with this, because we cannot tell if you are the owner of the wireless connection or someone trying to hack it via another computer.

  However, what you can try is to contact technical support that provides your internet service.  they will be well to validate your identity and then provide help or more detailed instructions.

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.