Why google chrome will not remain on the start screen

Similar Questions

• Satellite A300 will not get before the start screen

  Hi all

  had a problem with a laptop A300 about 2 to 2.5 years old. I just installed windows 7 prof and it worked fine for about 3 days and then all of a sudden it blocked start.

  He gets to the toshiba start screen and then reboots. He doesn't even try to start windows. You can go into the bios and make changes, etc., you can not press f8 to load in safe mode, only it does not even come to that.
  You can press f12 and raise the start menu and try to boot from the CD but this new fact not work and it just restarts again

  I don't know how else to troubleshoot it. I don't think it's a motherboard problem can you enter the bios.
  It could be a HARD drive problem, but then I thought it would have gave you a warning message of any (no available boot device) and you can see the HARD drive in the bios and would have thought that it would have started at least on a CD.

  The only things I can think about are drive problem HARD for the problem RAM or motherboard problem.
  I think install win 7 to 3 days there is just a huge coincidence?

  Any help would be great. Thank you

  Hi hitenkacha,

  Hmm... Which is really strange, if the laptop restarts after the Toshiba start screen but it doesn t happen if you go into the BIOS or boot menu...
  So, if you go into the BIOS and wait a few minutes, he doesn t restart?

  Yet one thing would be interesting to know: what happens if you try to boot from the recovery disk Toshiba? Generally, it should still possible to boot from this drive if it s ok.

  Check this box!

• Muse CC 2014 will not go beyond the start screen

  

  This is the error I get when I try to open the Muse. To do this, the splash screen, the small progress bar happens to nearly 90% and this will then appear. What should I do now?

  Hi Brad,

  Have you tried to uninstall and reinstall?

  If this also fails, please create a new account administrator user on your computer. Log on with this new user and trying to install Muse. Please let me know how it goes.

  Kind regards

  Aish

• Why Google Chrome is not supported in the Apex?

  I saw it listed in the V3.2 release notes.
  
  Anyone know if there are issues with Chrome, or it's just a matter of not wanting to try to support too? Not that I think a lot of people really use it yet (or never?).
  
  My limited experience in my Apex via Chrome applications has been flawless, but we are about to release to production with outside users, so I can't check what are the browsers they accompany in. Or should I put a conditional test on the first page to check something their browser other than FireFox and IE?
  
  Does anyone know of issues specific to Chrome, including in running an application (as opposed to develop)?
  
  Thank you
  
  Stew
  
  p.s. I'm not trying to bash Chrome. It is a good idea and a decent app for what it does. If it was compatible with RoboForm, I would use it regularly.

  Hello

  Maybe the following can help - Re: chrome with apex? .

  Kind regards
  Arie.

  -------------------------------------------------------
  Be sure to mark the appropriate fix/useful messages. For the long term, it will benefit us all.

• Google Chrome will not update on Vista

  Get this message from Google Chrome which signals that Google Chrome will not update with Windows Vista more.

  Should I do something?

  I searched through the updates of Windows to see if we have missed something, but nothing helped. I saw a post about the pre installed "youcam"... we should be arrived at?

  Do not uninstall Google Chrome still... You can install Firefox, front - and then import your Google Chrome Favorites, before you uninstall.

  Updates to Google Chrome does not come through Windows Update, but when you click on the "Hamburgermenu" in Google Chrome. (3 lines under the Red close button)

  See help

  Click on Google Chrome

  This will start the update...

• The volume control will not remain on the taskbar, XP

  The volume control will not remain on the taskbar, I open the control panel and sound to restore everytime I restart the computer. How to restore the registry file which told him to stay?

  Thank you, Larry.

  I found the Microsoft FixIt program and ran that she and that solved the same problem you described.

  Thank you very much!!!

  Ross

• Messages that appear to be malicious will not remain in the folder deletion... they simply re - appear in the Inbox in seconds.

  Evil emails will not be removed

  I have Windows XP and MSN email.  I have two emails, responses to facebook friends who seem to be malicious and will not remain in the deleted folder... they simply re - appear in the Inbox in seconds.  When I click on it, or even click on an email near them... my security appears and says that someone is trying to steal the credit card...

  Hi DougFergus,
   
  I recommend you to contact MSN support team to improve assistance to this topic:
  How to contact MSN customer service

• E260 will not go past the opening screen

  I got my 260 E for about a year and later that yesterday I went to turn it on, but it remains on the logon screen. Enter mode 'sleep', but I can't listen to music or find out anything because it will not go beyond the opening screen. The second of 10-15 soft reset I tried a hundred times, but it does not work.

  If remove/insert the battery did not work, the next step would be to format the drive.  You can also try to update the firmware.  I hope that you have a model v1.  What does say on the back of the drive?  Do you see a blue Sansa logo on the splash screen?  If so, you have a model v2 with no recovery mode.

  Assuming you have a v1 with the recovery mode:

  1. Turn off the player.
  2. Slide the key lock (to headphone jack).
  3. Press and hold the RECORD when connecting to the PC.
  4. Output RECORD when the "Welcome to recovery mode" message on the LCD s drive.
  5. Open my computer/Windows explore and see if you can find a new "16 MB - FORMAT" labeled removable flash drive
  6. Right-click on 16 MB-FORMAT and select new folder.
  7. Name the new folder "sansa.fmt" (without the quotes).
  8. Use the remove safely icon in the system tray.
  9. HOLD reset in the unlocked position.
  10. Disconnect the player from the PC.

  The player must, by seeing the folder sansa.fmt in the root directory of the drive, proceed to format itself.  Pay attention to any error/success message see you.  If all goes well, it will tell the full format and then to restart.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  If the format does not work, the next step is to try to update the firmware.  Go to the correct sticky message and download the firmware for your region .24A (assuming that he is a player of v1).  Drag and drop the embedded .mi4 and ROM files of archive of the firmware in the root directory of the 16 MB-FORMAT drive.  Make sure that the files end up in the root directory and not in a subdirectory.  Unplug and restart the player as before.

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• My hp will not go past the blue screen

  I tried everything I can think of.

  Safe mode

  Restore and system recovery

  Cleaning system

  nothing will make me past the blue screen

  Model number G62-244

  Please help me!

  Hello cannary77:

  Sorry your computer broke down. Thanks to updates from Microsoft. Well I see you tried safe mode and couldn't open. I hope you have your recovery disk. It's the time to use them. Just insert the disk and turn on coomputer. If your memory or your hard drive was not damaged it must start the process of full recovery. Follow on screen commands. If you do not have your recovery disk, then you can order them through section of HP computer parts. I hope that this step is all you need. Because if this last resort fails then your computer should be taken for repairs. Maybe just replacing memory chips or the hard drive maybe both.

  Once you fall upwards and re-run. Modify the updater settings to automatically update, but let me pick witch to install. Now manually check you for updater and see if the updates are downloaded. Check only one couple at a time. For some reason when a buch of them settle in once, what is happening. I got lucky when it happpened to me. I could get my computer in safe mode and do a restore from the back. Since I changed my settings it didn't happen.

  Oh if you need send repairs request an estimate may be cheeper to buy new, then tries to fix it. Also check your warranty may still be covered. All HP computers come with one year warranty. Good luck

• trial version will not run before the splash screen

  I hope someone can help please!
  I downloaded the demo of dreamweaver 8 yesterday and I installed and ran fine. Today, that he will not run in front of the start screen. He stands up and asks if I want to buy or wear on the trial--I take trials and the dreamweaver start screen 8 arrives, and then nothing happens. The program does not start. I uninstalled and reinstalled. I rebooted etc - still no go. The other trial, I downloaded (firestarter) works very well yet.
  I am running windows XP media center edition service pack 2.
  Can anyone help please?

  Yes - it ran fine yesterday.
  I think I found the answer. I searched through the posts here & found someone else with the same question a few months ago.
  For anyone who needs to fix - check out this link - read to the bottom where he talks about problems. I ran the updater.2 and it seems to work OK now.
  http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=a3f38dcf
  Thanks for the reply though.

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• Apps do not appear in the start screen; Store does not work

  Original title: I've lost all the boxes on my screen of such start-up: Xbox Music, store, games and everything I downloaded from the store.

  How can I recover these applications. Microsoft shuts me after having problems of security in my system (mail, identity and etc.) these problems have been resolved, how can I solve these issues. ? I love these apps and want to continue to enjoy. I pinned the store, but when I try to open it, it is upward (like the icon of music), but they come immediately to my office.  Help, please!

  Hello Shirley,

  Thanks for posting your query on the Microsoft Communities.

  I'm sorry to hear that. I guess this must be frustrating. Let me try and help you with the problem.

  What do you mean exactly by "Microsoft shut after having security problems?

  Kindly, follow these methods and check if that helps:

  Method 1:
  Check if all applications are in the section "my applications".

  If you are able to find the apps in the "My apps" section, then refer to this article and PIN back to the start screen.

  What happened to the apps on my PC?

  http://Windows.Microsoft.com/en-us/Windows-8/what-happened-apps-PC

  Method 2:
  Now try to run the Troubleshooter of Apps. This tool can automatically identify and fix problems with applications and store.

  Method 3:
  Also, for the problem the Bank of Windows, let us try emptying the cache memory store:

  a. type in the right edge of the screen, and then click Search.
  b. enter run in the search box and then press or click run.

  c. Enter the command wsreset.exe run and then press or click OK.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• need to uninstall and reinstall firefox, google chrome will not allow him, tells me I'm going some page open and I did not

  need to uninstall and reinstall firefox, it tells me to close google chome windows I get thi message when I
  go to the Control Panel programs and features high firefox uninstrall
  I did the same process with google chrome

  Uninstall Firefox ask you to close Google Chrome? It's strange. I guess that you have closed all the browser windows when this happens.

  I should ask: why do you need to uninstall and reinstall Firefox? Usually, this does not resolve problems with Firefox. Maybe read this article: Firefox Refresh - reset the settings and Add-ons.

• UL will not remain in the predefined layout

  OK, I made this site for the school. My ul list will not stay in one of the premade layouts dw. Bullets leave side of it. Someone knows why?

  Here's the html and css

  <! DOCTYPE HTML >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > Untitled Document < /title >

  "< link href="assets/css/honey_bee.css "rel ="stylesheet"type =" text/css">

  < script src = "SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script > "

  < link href = "SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" > "

  < / head >

  < body >

  < div class = "container" >

  < div class = "header" > < a href = "#" > < img src = "assets/honey_bee_web_banner.png" alt = "Honey Bee Prints" width = "961" height = "140" border = '0' well = "#Map" / > < / has > "

  < ul id = "MenuBar1" class = "MenuBarHorizontal" >

  < li > < a href = "index.html" > home < /a > < /li >

  < li > < a href = "products.html" > Products < /a > < /li > ""

  < li > < a href = "pricing.html" > pricing < /a > < /li > ""

  < li > < a href = "deals.html" > Treaty < /a > < /li > ""

  < li > < a href = "about.html" > on < /a > < /li >

  < li > < a href = "contact.html" > Contact < /a > < /li > ""

  < /ul >

  < a href = "#" >

  < name of the map 'Map' id = 'Card' = >

  < area shape = "rect" coords = "320,6,650,133" href = "index.html" alt = "link to the home page" / > "

  < / map >

  < /a >

  <! - end .header - > < / div >

  < div class = "content" >

  < p > now what are promotions and discounts we offer until May 25: < /p >

  < ul >

  < li > = FREE SHIPPING order more than 500 pieces

  10% OFF = any order over $ 200 < /li >

  < li > 20% OFF = any order over $ 400 < /li >

  ADDRESS in RETURN FREE < li > LABELS = one page of address return labels for all orders of $100 and more < /li >

  < li > FREE card holders (LIMITED TIME) = arrested more than 300 cards < /li >

  < /ul >

  < br / >

  treats back < p > check frequently updated! < /p >

  <! - end content - > < / div >

  < div class = "footer" >

  < p > & copy; 2012, honey Bee prints. All rights reserved. < /p >

  <! - end .footer - > < / div >

  <! - end .container - > < / div >

  < script type = "text/javascript" >

  var MenuBar1 = new Spry.Widget.MenuBar ("MenuBar1", {imgDown: "SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});})

  < /script >

  < / body >

  < / html >

  HERE'S THE CSS

  {.menu_bar}

  do-family: Arial, Helvetica, without serif.

  font-size: medium;

  make-style: normal;

  make-weight: normal;

  }

  {.contact_font}

  do-family: Arial, Helvetica, without serif.

  font-size: medium;

  make-style: italic;

  }

  {.body_text}

  do-family: Arial, Helvetica, without serif.

  font-size: medium;

  make-style: normal;

  make-weight: normal;

  letter-spacing: normal;

  text-align: left;

  Word-spacing: normal;

  }

  {.paragraph_header_one}

  do-family: Arial, Helvetica, without serif.

  font size: large;

  make-style: normal;

  make-weight: bold;

  }

  {.red_deals}

  do-family: Arial, Helvetica, without serif.

  font size: large;

  make-style: normal;

  make-weight: bold;

  Color: #F00;

  }

  {body

  margin: 0;

  padding: 0;

  Color: #000;

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 100%;

  line-height: 1.4;

  background-color: #CCCCCC;

  }

  UL, ol, dl {/ * because of variations between the browsers, it's best practices to zero padding and the margin on lists.} For consistency, you can specify the amounts you want to here, or on the list (LI, DT, DD) items they contain. Don't forget that what you're doing here cascade to the .nav list unless you write a more specific selector. */

  padding: 0;

  margin: 0;

  }

  H1, h2, h3, h4, h5, h6 {p}

  margin-top: 0;     / * remove the top margin works around a problem where margins can escape from their container div. The margin of the low rest it will take away from all of the following items. */

  padding-right: 15px;

  padding-left: 15px; / * adding padding to the sides of the elements in divs, instead of divs themselves, gets rid of any mathematical model of box. A div nested with side pads can also be used as an alternative method. */

  }

  an img {/ * this switch how to remove the default blue border displayed in some browsers around an image when it is surrounded by a link * /}

  border: none;

  }

  / * ~ ~ Style for your site links must remain in this order - including the Group of selectors that create the hover effect. ~~ */

  a: link {}

  Color: #0000FF;

  text-decoration: underline; / * unless you style your links appear to be extremely unique, it is best to predict stresses quick visual identification * /.

  }

  a: visited {}

  color: #660066;

  text-decoration: underline;

  }

  a: hover, a: active, a: focus {/ * this group of selectors will give a browser keyboard the same experience of hovering as the person using a mouse. * /}

  text-decoration: none;

  }

  / * ~ ~ This container fixed-width surrounds the other div ~ ~ * /.

  . Container {}

  Width: 960px;

  Background: #FFF;

  margin: 0 auto; / * set to auto on the sides, coupled with the width, the layout centres * /.

  }

  / * ~ ~ the header is not given a width. It will extend to the entire width of your layout. It contains an image placeholder to be replaced by your own logo linked ~ ~ * /.

  . Header {}

  background-color: #FFFFFF;

  }

  / * ~ ~ It's layout information. ~~

  (1) padding is only placed on the top or the bottom of the div. The items in this div have padding on their sides. This avoids any «mathematical model of box» Keep in mind, if you add lateral pads or border to the div itself, it will be added to the width that you set to create the * total width. You can also remove the padding of the element inside the div tag, and place a second div inside it with no width and padding necessary for your design.

  */

  . Happy {}

  padding-top: 50px;

  padding-right: 0;

  padding-bottom: 10px;

  padding-left: 0;

  }

  / * ~ ~ Footer ~ ~ * /.

  .footer {}

  padding: 10px 0;

  background-color: #FF0000;

  color: #CCC;

  }

  / * ~ ~ various float/clear classes ~ ~ * /.

  .fltrt {/ * this class can be used to float right to the item in your page.} The floating element must precede the element it should be next to the page. */

  float: right;

  left margin: 8px;

  }

  .fltlft {/ * this class can be used to float an element on your page.} The floating element must precede the element it should be next to the page. */

  float: left;

  right margin: 8px;

  }

  .clearfloat {/ * this class can be placed on a < br / > or div empty as the final element after the last div floating (in the #container) if the #footer is removed or put out the #container * /}

  Clear: both;

  height: 0;

  font size: 1px;

  line-height: 0px;

  }

  . Header img {}

  display: block;

  }

  It is caused by this CSS rule:

  UL, ol, dl {/ * because of variations between the browsers, it's best practices to zero padding and the margin on lists.} For consistency, you can specify the amounts you want to here, or on the list (LI, DT, DD) items they contain. Don't forget that what you're doing here cascade to the .nav list unless you write a more specific selector. */

  padding: 0;

  margin: 0;

  }

  Try to add to your CSS, adjust the values according to:

  . Happy li {}

  left margin: 45px;

  padding-left: 25px;

  line-height: 1.5;

  }

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/