Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

Similar Questions

• HP Envy 4522: HP Envy 4522 stopped accepting the password on Lenovo laptop but still very well with 5 Nexus?

  Hello!

  A few months ago, I installed my printer and it worked perfectly on both devices: laptop Lenovo Y700 (Windows 10) and Nexus 5 (Android).

  As far as I know that it didn't change with the computer, outside of those frustrating mandatory Windows updates. The last time I printed something with the laptop was a few weeks ago and all went well. This afternoon, she asked my network key and it does not accept my Wifi password.

  Everything is fine and prints no problem when I use the smartphone.

  I have re-configured network wifi directly on the printer, but it has not made a difference.

  I have not changed internet provider.

  Can someone please clarify/help me?

  Thank you!

  Marilyn

  Hi @Merlin999,

  Thank you for showing interested by the HP's Support Forums!

  I understand that you are able to print from your Android device, but not from the computer Windows 10. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like it's an address IP comes into conflict with the computer or there is a print driver problem. Windows updates can cause changes with print drivers.

  Please check that the printer and the computer are the on the same network.

  Tips for successful network configurations:

  • How old is the router? Update the firmware on the router.
  • Don't hide the SSID (network name).
  • Do not use a network of comments (SSID).
  • Using a unique network name (SSID).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz network name should not be the same as the name of your network to 5.0 GHz. rename the 5.0 GHz network.
  • Enable DHCP.
  • Avoid using filtering by Mac address of the router.
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • What is the intensity of the signal?

  If the problem persists, please follow the steps in this Post of mine.

  You can try to change your WSD printer port by a Standard TCP/IP port.
  To do this, you need the IP address of your printer. The Network Setup page shows the parameters of network for the product. To print this page; Press the network button on the control panel of the product.
   
  You will then want to follow these steps for the switch port:
  1 locate and open devices and printers.
  2. right click on your printer icon and click printer properties.
  3. click on the Ports tab along the top of the page.
  4. click on the Add port button.
  5. If you have the option for the HP Standard TCP/IP Port, it's just otherwise select Standard TCP/IP Port.
  6. click on the button new port...
  7. click on Next > button in the wizard.
  8. Enter the IP address of your printer from your Network Configuration page. Note: The Port name is automatically filled in. I would recommend to put a check mark in the box. Always print to this device, even if it's the IP address change.
  9. click on the Next > button in the wizard.
  10. click on the Finish button.
  11. This can take you back to the Printer Ports window, you should be able to shut up. Then click on apply and OK in the Properties window.
  12. try to print to see if the problem is resolved.
    
  If the problem persists, try to install your printer using the Integrated Windows Solution.

  • What were the results?

  If the problem persists, we need properly remove and reinstall the software and drivers.

  • Follow the steps in this Post by my colleague @X-23.
  • Click here to download and install the series HP ENVY 4520 full feature software and drivers.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Why has she changed my default google to yahoo search engine? and how to get google?

  Why has she changed my default google to yahoo search engine? and how to get google?

  It changed when I did the OS x el capitan was updated a few days ago

  A plug-in or add on could have asked or forced into it without your consent.

  Close Safari

  Open Safari, hold down the SHIFT key

  go to Safari > Preferences

  go to the general tab

  change your homepage

  go to the 'Search' TAB

  change your search engine

  

  for other browsers will refer to their documentation for support

  https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

  https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

• iPhone 5 only connects very well with 5 Ghz Wifi

  Hi all

  After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.

  However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.

  I tried to reset, restore the default values, reinstall iOS... any suggestions?

  Hello iovin80,

  Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:

  Potential sources of Wi - Fi and Bluetooth interference
  Recommended settings for the WiFi routers and access points

  See you soon!

• Re-import does not? (camera connected very well)

  Background:

  * I have clips that have the icon of film in their breast, this seems to be due to a hiccup during the import occurs.

  Creating a project using some of these types of clips from this event worked well.  Project plays very well.

  * Trying to export there is no options, because it seems that you cannot include related camera clips

  * When you try to use the RE-IMPORT to solve this problem (with the [iPhone] camera connected very well), this does NOT work, and while I have a working project so there is no way to action and export the project

  How can question - I get this to work?  How can I solve what seems to be a problem of FCP with REIMPORTATION?

  NOTES:

  * Actual error message is below, but note the camera is connected.

  "All the selected clips from cameras that are not connected, and there is no camera available archives." If please connect the cameras and try to import again. »

  * If I'm going to just import the files nothing happens, because it seems that FCP already knows, has them.

  If you optimized your clips, in the file menu > delete the generated project files by > remove optimized media.

  Russ

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• If I can do an Airport Extreme mobile network with a modem/router cable xfinity manufactured by Cisco?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?  The modem-router Cisco/Xfinity put into bridge mode?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?

  Yes, if the Airport Extreme will be connected to the Cisco DPC3939 back using wired Ethernet wired, permanent.

  The modem-router Cisco/Xfinity put into bridge mode?

  No. I you have done this, the Cisco/Xfinity device would only act as a simple modem... so it would not be a wireless service to all.

  A note of caution here... the support document you are referencing... Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)... use the examples that are long outdated does not follow with the versions present on a Mac AirPort Utility or iPhone/iPad.

  There are some good general information in the document.

• Extending Airport Extreme 802.11ac with older Airport Extreme 802.11n

  I need to extend the coverage of my wifi and I have an a 802.11ac AE and two former, 802.11n AE units and all are still functional.  Specifically, can the newest Airport Extreme 802.11ac extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?  If it can be done, what setting (bridge mode or extend the network mode) should be used on the 802.11ac model?  Any other need to know the tips would be greatly appreciated as well.  Thank you...

  can the newest Airport Extreme 802.11ac be extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?

  Yes, it's can... goal that the wireless "ac" will not be extended, of course. Here, I assume you think 802.11ac airport your 'main' airport and airport 802.11n as the airport of their extension.

  which parameter (bridge mode or extend the network mode) should be used on the 802.11ac model?

  You would not change the settings on the 802.11ac airport

  Reset an 802.11n AirPort Extreme back to factory default settings

  Connect an Ethernet cable from one of the three ports on the airport of 802.11ac for WAN "O" from the airport on the AirPort Extreme 802.11n which extend the LAN network<-->

  Configuration to use Apple "Assistant" to put in place the AirPort Extreme 802.11n and it will feature the correct Assembly for you.  Everything you really need to do is assign a name that you want to call the airport and "Wizard" will take care of everything else.

• Keyboard and mouse stop working at the login screen, but work very well before he gets to connect.

  My keyboard and mouse suddenly stopped working today, I was pressing F11 to try to get the system to boot from a recovery screen and it wouldn't, but when he returned to my screen connection and requested my password it won't let me not use the mouse or the keyboard, I wonder if I accidentally turned off something and if anyone knows how to turn it on turn it back on. I'm using vista on a HP dv5

  Thank you

  Hello Djc618,

  Thank you for your message.  You have a friend or a family member that can allow you to use a keyboard to see if the material can be defective?  You can also try using your keyboard on another computer, if this does not work then you probably have a bad keyboard.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows 7 computer is no more can detect the wired network, but all my other wireless and wireline devices connect very well. Replace the network card and no change.

  Hello!  This morning my Windows 7 (the motherboard Acer) desktop ceased to recognize the wired connection to its network card.  In other words, it shows kind of connection, but notes "no Internet access.  It connects to a surfboard by Motorola through one Ooma hub, although I encounter the same problem when I connect to the desktop directly to the surfboard.  All other devices Wi-wired and that connect to the surfboard are functioning properly.

  Thinking that the Realtek NIC on the motherboard Asus was the problem, I installed a new Trendnet network interface card in the PCI slot.  I disabled the network card to the motherboard via the BIOS settings.  No change.  Always 'no Internet access.

  Time Warner Cable test the modem from their office and said it was working properly.  I also connected a laptop directly to the surf board using the same cable, and he was able to connect to the internet.

  Can someone help me understand what the problem is?  Thank you!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Orange flashing on TC - connected very well...

  I have a Time Capsule 3 to. The yellow light flashes. Everything is connected. Works very well. Mac OS X El Capitan. Airport utility sees not the TC check error and have it repaired. Watch greyed on TC silhouette with yellow Triangle icon. You are looking for assistance.

  PS - wrote this question on the network during the show. Proving seamless connectivity.

  Have you tried clicking on the yellow Triangle?

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• Local area 2 connection disconnects, but works very well with active VPN. Wireless works well?

  Hello. I just encountered a problem which disconnects me on the net on my desktop PC. Other material in the House connect to wireless very well, discarding the router or my ISP.

  Strangely, when I activate the VPN service there is a connection on the desktop PC. As I turn off again, I see the Local 2 (TAP-Win32 Adapter V9) network connection are disconnected. I checked the properties of the connection once work and does not, and they look identical. I did a full scan of the PC of malware etc, but nothing came.

  Any help or advice on what information I need to provide this forum for help with this diagnosis would be greatly appreciated.

  Hi André,.

  What is the brand and model of the computer?

  I suggest you to uninstall and reinstall the network drivers and check.

  Follow these steps to uninstall the network drivers.

  a. press the Windows key + R and select devmgmt.msc and press enter.

  b. search for NIC and expand it.

  c.       Right-click on the network driver , then select Uninstall.

  Now, go to the manufacturer's website to download the network drivers, install the drivers and check out them.

  Reference:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results of the question.

• Connection printer 3050 has to new airport extreme router

  I just upgraded my router to the extreme of Apple Air Port and cannot figure out how to connect the printer to the router.  I do not have the CD that came with the printer and can't find where to download the HP software.  The printer is recognized on computers (Mac OS 10.9.2) goal will not display because it is "not connected" to the network.   Before, I just used the WPS option on the printer and pushed the button on the router.  Since this is not an option more, I keep looking, but does not know where to put the PIN either.  Help, please!

  Thank you!!

  Thanks for the reply.  I called Apple support and they walked me through the steps of adding a printer WPS to extreme Air Port (Airport basestations Menu utility (top), then select Add a WPS printer and then have it search for printer or enter the PIN).  He missed by looking at the menu at the top of the AirPort Utility where the Menu Option of base station is... But I can't believe how it was difficult to try to find a solution to the HP Web site for that!  Looks like it would be a simple soultion to the list.

• Apple airport extreme - this unit may be overheating message and blinking orange light

  I see constant flashing light of Ember and the message "this device may be overheating" in airport utility.

  Is what model? Questions over overheating are high AC version. If this isn't the case, please give the number of actual model of the base, A1xxx.

  The fan may hang with dust... details in airport utility should give you this info.

  

  

  The foregoing applies only to the model AC Extreme and TC.