Why has my transit of mercury for 2nd monitor gone haywire?

Hello

I have always used the Transit of mercury to a second client monitor. Since the update to 2015 CC, I had this problem with my first.  Rather than send the program on the TV from the client, it uses the corner of my primary monitor. I think it's just around the corner, because of the monitor 4 k, as he tries to send a 1080 p on the TV signal.

This screenshot should illustrate:

http://i.imgur.com/8zVxxoZ.jpg

I'm on Yosemite and the graphics card is a GTX970 - the TV plugged into the HDMI and the monitor connected via displayport. I didn't have any other problems with the General map or use in other software.

I tried the main interface of the first passage to the TV and then Transit of mercury to use 4 k monitor for reading and who worked as expected.

Any ideas?

Update: I changed my primary monitor on OSX (by clicking and dragging the white bar in the settings screen arrangement) on TV and then dragged the interface in my secondary screen (screen 4 k), using the transit of mercury for monitor 1 (TV). Works fine for now.

Tags: Premiere

Similar Questions

  • Why Vista WMP can't play .asf files and why MS has not created a fix for this?

    Why Vista WMP can't play .asf files and why MS has not created a fix for this?

    Hi pdaamckechnie,

    The ASF Format (Advanced Systems) is the preferred Windows Media file format. With Windows Media Player, if the appropriate codecs are installed on your computer, you can play audio content, video content, or both, that is compressed with a wide variety of codecs and that is stored in an .asf file.

    You can check the link below for more information on the types of media files that supports Windows Media Player
    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992

    See the link below for more information on codecs.
    Codecs: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Why has my Aspire 5750 G temperature - is too high

    Hello guys. Why has my Aspire 5750 G temperature-"6 GB RAM / Intel Core i7 2630QM 2.0 GHz 2.93 GHz / 540M GPU"

    is too high as it my power options is high-performance but in any kind of power change options, there is nothing

    Sorry for my bad English

    To be honest, I think it's quite normal. Its an old laptop, 2nd generation and it is a processor of 45 w. (QM)

    I have an i5-6200U, and my time will never more than 60 C. Its 15W

    Maybe you should clean the fans a little, if you've never done before.

  • Why should I provide my age for synchronization?

    Why should I provide my age for synchronization?
    How to?
    Where my privacy? How to?

    Hello slavius, for legal reasons, mozilla has to verify that you are over 13 years of age when you sign up for the service. It is not used or stored for any other purpose.
    http://en.Wikipedia.org/wiki/children%27s_Online_Privacy_Protection_Act

  • Why has she changed my default google to yahoo search engine? and how to get google?

    Why has she changed my default google to yahoo search engine? and how to get google?

    It changed when I did the OS x el capitan was updated a few days ago

    A plug-in or add on could have asked or forced into it without your consent.

    Close Safari

    Open Safari, hold down the SHIFT key

    go to Safari > Preferences

    go to the general tab

    change your homepage

    go to the 'Search' TAB

    change your search engine

    for other browsers will refer to their documentation for support

    https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

    https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

  • Why mobile Firefox is not available for Symbian ^ 3 (anna) or Symbian ^ 4 (beautiful)?

    Why mobile Firefox is not available for Symbian ^ 3 (anna) or Symbian ^ 4 (beautiful)?

    Nokia has moved from Windows Mobile development. New Symbian phones are not in Nokia's long-term plans.

  • Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

    Setup of Windows 8 consumer priview

    Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

    You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

    If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

    (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
    To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
    http://www.partition-tool.com/personal.htm
     
     
    (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
    Download Windows 8 consumer Preview ISO:
    http://Windows.Microsoft.com/en-us/Windows-8/ISO
    After you download the ISO file - use the Windows USB/DVD Download tool to install media:
    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
     
     
    (3) installation on a separate partition for dual boot:
    1 make a DVD or USB installation drive - to see the two options above.
    2. start from the DVD or USB install drive and click on install when prompted.
    3. during the installation process, when asked - choose a custom installation.
    4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
    5 continue with the installation.
       
     
     
    First of all please note:
    1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
    2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
    3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
    4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
    (A) remove your current hard drive and install the Preview of consumers on a spare drive.
    (B) install it on a spare computer.
    (C) install the Preview of consumer in a virtual machine.
     
    For more information - Windows 8 consumer overview FAQ:
    http://Windows.Microsoft.com/en-us/Windows-8/FAQ

  • DV7-4280us - Bay of disk HARD 2nd vacuum has no visible connection to a 2nd HARD drive.

    My laptop Pavilion DV7 and previous DV8 had two bays for HARD drives, one of them wired to a hard drive, but not containing is not a hard disk at the time of purchase.  I expect the same thing when I ordered this Pavilion DV7-4280us, which is, I think, made in China, but I have not the same.  This one came without visible connectors for the hard drive, I had already bought to install into the empty Bay.  My Technical Support call made me advice to buy a disc kit hard (with caddy & connections) from HP, as if the receive connectors were available in the drive Bay HARD vacuum.  I didn't not agree because (and the next two paragraphs I added so that the well-intentioned forum members continue to give me the standard answer for laptops which actually have the usual connectors & waiting in the drive Bay HARD 2nd vacuum.  I appreciate the two forum members who have offered help so far, but there is no need to waste more based on my failure to clarify the problem):

    There is NO METAL NAKED INTO THE BAY VOID that COULD CONNECT a HARD disk.
          UNLESS A NEW CONNECTOR GOES TO THE MOTHERBOARD HARD DRIVE, IT IS USELESS FOR THIS COMPUTER.

    Each HARD drive connector I've seen only connects the HARD drive to a connector in the HARD drive Bay.

    The connector of the latter reaches the motherboard, and that the connector does not exist in this 2nd computer HARD disc Bay.

    Even if I could get a cable to connect a HARD drive to an unused connection & waiting on the M-Board, I can't M-Board.  M-Board is inside a barrier which could be called the bottom of the laptop - external surface of the portable computer.  (Battery and bays for HARD drives are outside the confines of the current computer, the value in their own hollow spaces in the bottom panel, with secondary coverage on the hollow spaces, i.e. the bays for HARD drives and storage media).  I looked for a way really open the casing and expose the M-Council connection for 2nd HARD drive (IF it exists); but I didn't know how to do it.  It is clear to me that this is not intended to be a facility run by the user. But I would if HP (or maybe even a 3rd party who made it) provided some good instructions.

    I'd like to think that HP did not make this change to the line DV7 laptops to double HARD drive, and that the Chinese manufacturer made the change without approval or even knowledge of the management of HP.  I want to believe that because he was, at best, a really stupid thing for HP to the customers who pay for the best HP can provide.

    So my questions are the following:

    1. The motherboard in this computer still has the ability to manage a 2nd hard drive?
    2. If 'NO', then HP would be willing to take over this very disappointing computer in Exchange to a DV7 which is equipped with HARD drive connectors available in the 2nd, empty, Bay?
    3. If 'YES', then
    4. HP or someone else would be willing to provide connectors, and instructions for me,
    5. OR install the missing connection to the drive for me, Bay
    6. While, in both cases 4 or 5, I can install a HARD drive in the Bay, empty 2nd drive reasonably, I expected when I ordered this computer?

    All my apologies and thanks to KaLin0908, who responded so quickly and helped me realize that my original description was not clear enough.  I hope that my changes to clarify the problem have not ruined the tone of my call.  I'm aiming for "clear and grateful."  If this revision reads as Loud or Yelling or abrasive or anything else bad, I'd appreciate any suggestions to improve it.

    I have the same computer.

    At first seems like you say but

    If you look carefully the second Bay of hd, you will see 4 small holes

    Those who are for the hard drive caddy, you can buy that and it's expensive

    You should also buy a hd cable, but be careful, there must be about 5 inches long

    The cable for 1 hard disk does not work

    One end goes on the hard drive and the other going to the MB. The connection is planned

    for the memory modules

    The kit costs about $ 45. If bought at hp and about 35 if purchased by another company

    http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

    This will give you an idea of where/how the screws connect to the caddy

    4. connect the hd to the caddy /ssd

    4. connect the housing inside the laptop

    http://www.dectrader.com/605415-001-new-HP-HDD-hardware-kit.html#.ULTmVNcew1w "

    Almost the same video

    http://www.YouTube.com/watch?v=EZgiX-pzdL8

  • Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

    No Option to install repair - SAD

    Hello

    Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

    I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

    As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

    Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

    -Todd w.

    "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

    «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

    As Todd, is the answer.

    "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

    Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

    "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

    It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

    If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

    Another possible place you could make suggestions which could see the developers would be:

    https://connect.Microsoft.com/default.aspx

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why has my laptop started to randomly stop before turning off

    Original title: computer power questions

    Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way?

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need the help of a
    real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
    Support from the manufacturer.

    ===========================================================

    Check with these utilities to see if information may be collected: BlueScreenView run to see if
    There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
    seconds before) see the event log contains useful information.

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    =========================================
    =========================================

    More if needed and you think that the closure could related to the Options of food or sleep.

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
    type of hibernation - see turn Hibernate on / off

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Why is there no Equalizer multi for windows 7?

    Why is there no Equalizer multi for windows 7?

    Yes, I understand that you can change the settings in media player to change the equalizer, but it is unnecessary, for example when you listen to online content, it is a step back! I can't find compatible programs that can afford it, that has always been available on windows.

    What kind of audio chip do you have?
    The AC97 (more frequent) comes with a nice utility to do this. It is only 10 tapes but...
    The utility (called Manager of sound effects) is installed in the Panel by default.

    Otherwise, try Panel > Sound select your speakers, and then click the properties > Enhancements
    One of these options is an equalizer of sorts with presets down below.

    VP Tech Services

  • Can someone please explain to me why the Metro of Windows 8 for the WSJ application contains all THE STORIES?

    Can someone please explain to me why the Metro of Windows 8 for the WSJ application contains all THE STORIES?   I have the WSJ app on my Kindle Fire and he has indeed all the stories that are included in hard print.   And why the hell not the app allows for offline reading?

    Also, why hell isn't there a WSJ application for windows phone 8?   I know there is a WSJ direct application that shows videos, but I want a real WSJ app that shows all items.

    Original title: Wall Street Journal APP

    You would be better served if you asked these questions WSJ that they control if an application exists and is happy.  Hope this helps and if you need another post to help and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

    "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  • Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

    Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

    I have the dvd of my camera samsung nx3000 and got version and upgrade to 5.7.1 (high-end) and it is not the removal of the trial version of lightroom download creative cloud fog. How to get this tool software mi?

    Hi nicoa,.

    Dehaze feature has been introduced in the version of Lightroom CC2015.1 and is not a part of 5.7.1 version which is the previous version.

    If you need the dehaze feature, you must subscribe to plan creative cloud so that you use the latest version of Lightroom.

    Kind regards

    Claes

  • When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader.  This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall a

    That's happened?   When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader. No idea how or why this has happened. This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall and reinstall Acrobat Reader a few times.  With Acrobat Reader installed now I can't open my browsers or other files that has changed.  With Acrobat Reader uninstalled icons are appropriate and I can open the browsers, but other files may not always be open.  What happened, and what I can do to use Acrobat Reader again and also use my browsers and open the other files?

    You have tried to download Windows Explorer?

    In any case, this might solve your problem: Application, file icons change in Acrobat/Reader icon

  • Why the reader most recent Flash for Windows so plant them?

    Why the reader most recent Flash for Windows so plant them?

    I use the latest update of Flash player that has developed on this computer.  It's Flash player version 11.1.102.62 on a Windows 7 computer.  I have experienced excessive crashes Flash player in Firefox and Internet Explorer.  Since the two latest updates of Flash player who, it seems to come from Adobe it is a big problem with Flash player crashes.

    Previously, there was no problem... then there was the update yesterday and problems began.  I was hoping the last update would have fixed this problem, but now it's worse.

    Is it possible to return three updates and install older Flash Player?

    Adobe will never get this fixed number?

    Thank you

    Digi

    reproduce crashers regularly contributes to refine specific problems.  the random thugs are difficult to follow and difficult otherwise.

    the latest version of Flash Player, 11,2,202,228, were announced last week.  It would make 11,1,102,62 version two behind.  Would you mind upgrade to the latest version of the player?  There are a few crash fixes in our last offer.  You can go here to update: http://get.adobe.com/flashplayer/

    It is possible to downgrade, but it is not desirable that the old version will be always up-to-date with patches secuirity.  If you option for this, you can retrieve older versions here: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html#main_Archived_v ersions

    Note: Make sure you completely uninstall the existing version.

    Thank you...

Maybe you are looking for

  • Worse than YouTube video

    Photos and video of Travis Airshow: https://picasaweb.Google.com/mws94520/20110730?feat=email Embarrassing, ugly, shit, horribly wrong; worse than the poor quality on YouTube. I thought sorta my Cyber-Shot with HD 1080 and 12.1 mega pixels can do bet

  • System recovery disks do not work.

    I have a HP G62 339WM Notebook PC with Windows 7 Home Premium 64-bit.  I bought by mail, system recovery discs and they do not work.   And my HP Support Assistant displays "an error has occurred" and end not updates. The Troubleshooting Guide for the

  • Dedup on 7z file does not

    Hello world I have a server of 2012 I want to use to store backups month. I received it in the form of files 7z with compression max divided in 5 GB file.folder 01-2013Jan.7z.001Jan.7z.002Jan.7z.003Jan.7z.004Jan.7z.005 2013-02 folderFeb.7z.001... I i

  • Muse crashes when I try to adjust the key position?

    I tried to the best of my ability of troubleshooting. I rebooted. Uninstalled and resettled Muse, stages insisted followed by Adobe for the error. I'm now full of ideas.I guess it's user error, but I don't know how. So, please help.I'll make a text b

  • No option for 'Sync with Lightroom on mobile '.

    I'm setting up a Collection that syncs with LR on Mobile. When I "Create a Collection", I don't have an option to "sync with Lightroom on mobile." What setting I'm missing to make this option appear?