Why HP advises against the use of virtualization (AMD - V)

Similar Questions

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Why Firefox has disabled the only version of Flash (10.1.53.64) my computer can use? (Mac PowerPC G5) Help!

  Why Firefox has disabled the only version of Flash (10.1.53.64) my computer can use? (Mac PowerPC G5) Help!

  Your computer hardware has arrived at the stage where most of the software needs resources your machine cannot provide because it's too old. You have a few choices.

  1. Get new hardware that can handle the latest software
  2. Use a different operating system, like Linux (which is free)

  I rehabilitated an old G5 recently and it runs very well in the latest Firefox. I put Lubuntu on the machine instead the MacOS. Lubuntu (pronounced Loo-boon-two) is sort of a Ubuntu lite - a user-friendly version of Linux. There are many applications of your choice, and everything is free.

  You can also use the Ubuntu greediest in resources and a little more user-friendly, also free, but you can be more pleased with the performance of Lubuntu instead.

  The PowerPC, I did this on was one of the old blue Bondi ones. Firefox 8 had no problem to start on it at all and has all necessary plug-ins for video, audio, etc... I gave him a church and it works well for them.

  You can download older versions of Firefox, but you'll just open to security problems if you do.

  FYI: The Mac operating system is based on Linux.

• I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• How to trace the signal acquired against the clock all the time fixed by using Graph XY?

  Hello

  My goal is to trace the signal acquired against the clock all the fixed time dynamically. In General, it is like trace the waveform of the signal against the clock in a graph, but don't keep the recent 10 min waveform. My current approach is to get the timestamp by a VI and the express VI to use XY graph to make the plot. The result keep all data in the history which is not what I want. My question is that how to achieve my goal?

  Thank you very much

  Hao

  One way to show the last ten minutes of data is to use a graphic instead of a graph. Set the size of the history of the ranking for the number of samples you acquire in ten minutes.

  If you want to use the graph XY, you will need to manipulate the data yourself. If you don't want data from the last ten minutes and you want to throw all the old data, set up a circular buffer sized to hold the ten minutes of data. Once the buffer is full (after the initial ten minute break) adding a data point removes the oldest point. Make the buffer of a 2D with X data table in a line and the data Y in the next line. A queue with loss can be used in recent versions of LV to implement a circular buffer. In older versions, a driving force would be a good choice.

  Lynn

• ANyConnect Client certificate authentication and verify the Client against the Microsoft AD using DAP via LDAP domain membership

  Hello

  as described in the title one want to connect with AnyConnect Secure Mobility Client 3.0.2052 ASA 5540 Version 8.4 and licence Premium SSL.

  Customers using Maschine certificate to authenticate to ASA. It works very well.

  Now, I want to install a DAP to check the customer against the Microsoft AD using LDAP. I have configured the LDAP server in see ASA:

  AAA-Server LDAP protocol ldap

  AAA-Server LDAP (inside) host ldap.com

  LDAP-base-dn DC = x DC = x, DC = x DC = com

  LDAP-scope subtree

  LDAP-login-password *.

  LDAP-connection-dn *.

  microsoft server type

  I see that it works if I test via the testbotton server in ASDM and I also see in CLI "debugging ldap 255". But if I configure in DAP: AAA attribute ID:memberOf = Membre_domaine I can't see any request to the LDAP server as I try to connect with the Client und does not correspond to the DAP.

  No idea where the problem lies?

  Thanks in advance

  Hi Klaus,

  DAP will not make any call LDAP itself, it will only act based on the attributes received LDAP via the LDAP authentication or authorization.

  So you will need to enable the LDAP authorization in the tunnel - or connect to groups.

  Once you have, you can either use DAP or a map attribute LDAP for accept/deny access, see the example of these two methods.

  HTH

  Herbert

• In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  4 MB of an interactive file 6 MB (71% of the total file size).

  I'm only using Verdana.

  In this case the problem is not one of the fields have the police other than Helvetica. All fields are buttons, and all use the Verdana font in their appearances (icons), as opposed to their labels (aka Legend). This is how InDesign works when it generates the appearance for the buttons. As a result, that Verdana is incorporated several times as a subset, more than 300 times, once by button. This includes a lot of overhead, so that you get the size of large file.

  It would be much smaller than that you need to add buttons in Acrobat, even if you've used Verdana. In this case, the entire police would get embedded, but only once. It would take more work, but the process can be automated, if you need to do this sort of thing a lot.

• Why using the typewriter in acrobat 9 adds less file size that the use of the text of the comment in acrobat 11 tool?

  Why using the typewriter in acrobat 9 adds less file size that the use of the text of the comment in acrobat 11 tool?

  Two employees, one using acrobat 9 and the other uses acrobat 11. The two employees open a secure document one page 105 KB in size. Used using acrobat 9 using the typewriter tool to add comments. Document increases in volume to 137 kb. Second employee using acrobat 11 uses the comment add the text tool (since it is no longer a typewriter tool). This employee has to use tool once and the document immediately increases size of 105 k to 950 + kb. Why is this? What can be done to avoid this?

  As I suspected much earlier, the difference is in the fonts that are used for the text. For the smaller file, text annotation font is Times Roman. that is a policy that is essentially built into Acrobat/Reader. For the larger file, the font is Tahoma, which is not an integrated police force, which ends by happens so the entire police gets embedded in the PDF file. The size of this font on disk file is 681KO on my system (Mac), and it ends up taking more space when they are embedded in the PDF file. The same type of thing happens with form fields and this is done so that all characters in the font are available when the text is changed in a system that may not have the installed font.

  One of the problems is if you try to reduce the size of the file by changing the font that used up one of the built-in ones (Courier, Helvetica, TImes Roman), Acrobat does not remove the now unused of the file font information, if you do not get the reduction in file size that you can imagine, even if the font is no longer presented as being incorporated. I submitted this as a bug some time ago, but it has not been fixed.

• Why is it necessary to use the tag can be bound

  Hello, I am working with some simple data binding concepts.

  I defined a Combobox

  
  < mx:ComboBox id = "FirstCombobx".
  dataProvider = "{asArray1}" >
  < / mx:ComboBox >

  
  To provide data, I use a table

  public var asArray1:Array = ["state1', 'state2',"State3"];

  
  It works fine, I mean it shows data on the combobox control, now please tell me why it is necessary to use the tag can be linked with table.

  [Bindable]
  public var asArray1:Array = ["state1', 'state2',"State3"];

  Thanks in advance.

  Hello

  If you write a tag bindable and change this variable it will reflect automatically whenever you have assigned to this variable. Here is therefore the combobox will change each time you change the table not the inside of objects.

  I hope this helps.

  Rush me

• Why Oracle coherence is rarely used in North America, and the situation is

  Why Oracle coherence is rarely used in North America, and the situation is different in England?

  Jobs isn't the only way to measure. With the help of Google trends you will find the classification of 'interest' by city

  1. Tokyo, Japan
  2, CA
  3 London, United Kingdom,
  4, NY

  -David

• Firefox OSX 10.7.5 25.0.1 forces the use of default input source, why?

  Hello

  I have not noticed this in previous versions of Firefox, but OSX 10.7.5 25.0.1 version requires the use of the input source by default (e.g. my laptop, instead of the external keyboard connected keyboard).

  All other input devices are grayed out in the language & entry drop-down toolbar when the Firefox application is in short. This does not happen with any other application on my desktop.

  I think that's the question relates to this subject also:

  https://support.Mozilla.org/en-us/questions/977966?ESAB=a & As = AAQ

  See you soon,.

  Sunkai.

  Well, it's a broader issue to do with the question of whether the keyboard drivers that are installed are compatible with 32-bit and 64-bit applications.

  Firefox starts in mode 64-bit OSX by default, and if your keyboard drivers are 32-bit only, then this input source is not usable and is grayed out.

  Discussion of this for the British provisions can be found here:

  http://www.Gyford.com/Phil/writing/2005/11/20/using_a_british.php#c285152

  the British 64 - bit drivers layout can come from here:

  http://Liyang.Hu/OSX-British.XHTML

  If you have problems with your own keyboard, with a provision of another country, you will need to find drivers 64-bit for this layout.

• Why apple does not feel the need to restrict the use of the fan on a laptop?

  The macbook pro for a reason any waits until the thing is 65 degrees to get even the fan moving. Its bad that enough they insist on the use of passive cooling through the aluminum cover on PEOPLES TOWERS LOCATED. His obvious 'artists' download design final decisions because I'd love to talk to a computer engineer who think their design (which was used for many years) is convenient for any user that does nothing more, to consult by e-mail. It wouldn't be a problem if the design worked well, but as she performs poorly all laptops need thermo-accelerateur it is cpu departure from your warm thighs and your computer slower. Summer enjoying my ride burned since 2012. Thank you!

  Ask Apple, (which isn't us)

• In Windows XP, the BACKUP utility in system tools requires a floppy disk should be created when you back up an entire volume. Why should a disk be used?

  As floppy drive are no longer included in laptops, the use of a USB storage device would make more sense now? Is this possible?

  Richard1952,

  Yes, you should be able to select an area on which you want to record on.

  Start > all programs > Accessories > system tools > backup: make sure to follow the installation instructions USB is plugged on when you start the backup utility.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Why my PC keep forgetting passwords network and lies on the use of the correct connection to the NAS?

  My PC Windows 7 has acted weird lately because whenever I login to Windows and try to access my NAS drive or laptop, he asks the user name and password, even though I chose to remember it.

  The bit about the lie in question is on the NAS drive.

  The NAS drive is an Apple TimeCapsule (shock, I know), but it still works as a NAS device perfect. When I try to open it, it asks username and password as usual, but when I type in it properly, it appears saying that it is incorrect.
  The way I managed to get that player is now of type a random fake user and try to connect, for example comments. It says that I can not log in as a guest so I then type the correct user name and password after and it works...

  If for any reason any Windows is lying to me about the use of the wrong username and password. Also, I tried it on another PC and it works fine so it only affects this PC.

  Someone at - it solutions?

  Hi themichaelkc,
  
  I suggest you open the credentials manager and see if your saved credentials are correct.
  
  In addition, remove the passwords stored in the vault and re - enter the user name and password for automatic logon.
  
  See the following article for more information on the storage of passwords, certificates, and other credentials for automatic logon:.
  
  Store passwords, certificates, and other credentials for automatic logon
   
  See also:
   
  Manage passwords, certificates and other securities

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]