Why I can not connect on farmville2

Similar Questions

• Why I can not connect on Thunderbird, even if it worked this morning?

  It is now about 6 pm Pacific. Today I received an email in the normal way at 09:58. An hour later, I tried to log in and got the message "failed to connect to the server mail.comcast.net . Since then I have not been able to connect no matter what I do. Sometimes, it asks for a password. I type the single password that I've never had a Tbird and he ALSO gets rejected. DO NOT change any settings, just to avoid problems of this kind. I am firm out of my one and only e-mail site. I sent a test message to me 5 hours ago and I have NEVER received. How many other emails miss me? If you respond to this with a helpful suggestion or explanation, HOW can I find out, since I can't receive? WHY CAN'T I REACH MY SERVER? What happens if I incur financial losses as a result of this? Must what magic I identify myself as I went a long time without any problem? Yes, I am in a panic over this.

  Please continue in your original thread here.https://support.mozilla.org/en-US/questions/1091088

• Why I can not connect on the accounts of Firefox to put in place the synchronization? FF30 + keeps telling me how please enable cookies; cookies ARE enabled, already tried Safe Mode.

  Exactly what it says on the Tin.

  Why can't I connect to Firefox accounts to set up sync to my laptop? FF30 + keeps telling me how please enable cookies; cookies ARE enabled, and I already tried Safe Mode. This has happened since the new Sync has been set up, so I think that nearly 30 FF. I'm now up to 34 FF version and it still does not work. I was not able to sync from the "update".

  Problem #1: Going to about: accounts and clicking the Get Started button Blue opens a blank screen. It's not even a prompt on the cookies. It's just empty. Screen attached.
  It comes from before the modules are disabled. If they are disabled in Mode safe, we go to the #2 problem.

  #2 problem: I've skimmed a thread (https://github.com/mozilla/fxa-content-server/issues/1017) and I tried connecting to sync through accounts.mozilla.com instead, but if the screen does not turn white while the modules are always enabled, "Enable cookies" warning are as far as I can get. Go to about: accounts in Mode safe mode gives the same result. I deleted all my cookies and my cache, FF restarted several times with and without active modules and still nothing. I browsed this forum of support for similar issues, and while other people have the same problem, no other threads have been solved yet. Several later versions of FF, it is far too long for this question still unresolved... Screen attached.

  I know where the Firefox Cookie Manager, and I have enabled all settings. I was even able to third party cookies (even though I shouldn't really because they are unnecessary). No difference. Screen attached.

  I looked into: config and looked up the word 'cookie' in names, but even this is useless to me since I am not a programmer and so ignorant of what mean really all of these parameters. Screen attached.

  I'm at the end of my rope here, guys. It has been for months. A year. Maybe more than a year. I don't even remember. I just got a new camera and I don't want to add all my Firefox information one by one. It doesn't seem to be a way to contact Mozilla directly, so... Someone help please...

  Ensure that you allow cookies for the domain of the accounts.firefox.com if you are not allowing cookies generally or use the cookie setting 'Ask Me '.

  You can check whether DOM Storage is enabled.

  • http://KB.mozillazine.org/DOM.storage.enabled

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• Why I can't connect my id? He said "That Windows Live ID does not exist."

  "This ID Windows Live ID doesn't exist.", I need help!

  Why I can't connect my id? He say "Windows Live ID doesn't exist.", but I already have type the correct id? Please give me a solution, I need to connect my id to get the important email!

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• I can not connect to my game Center!

  When I click on the game Center app, it says connect. After I connect it says me to accept the terms and conditions.

  I accept the terms and conditions. But after that I agree he brings back me to the login page! This is the reason why I can't connect to my game Center.

  Answer please!

  He would be grateful if you answer!

  Hello Giant_Panda12,

  Thank you for using communities Support from Apple!

  If I understand correctly, you have a problem logging on game Center.  I'd be happy to try to help you with this.

  The first thing that I would recommend would be to force quit the Game Center app: force a nearby app on your iPad, iPhone or iPod touch

  If the problem persists after restarting the application, then shut down and restart the iPhone would be the next step: reboot your iPad, iPhone or iPod touch

  If you are still not able to connect properly, you want to make sure that you have a current backup of everything on your iPhone. If you follow this link, you will find instructions on how to make a backup: How to back up your device using iCloud or iTunes.

  It is possible that something is damaged and that the origin of the problem.  Once the backup is complete, I would say to reset all settings.

  Reset preference files resets all parameters that may be problems. This step will not delete your contacts, photos or personal information. It deletes all your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Do you this by clicking on settings > general > reset > reset all settings.

  See you soon!

• I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

  I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

  iOS 9.2.1

  certificate is daily horoscope

  wwhat the devil is and why it has expired?

• Why I can not activate my norton antivirus 2009.

  Why I can not activate my norton antivirus 2009, even though I am connected to the internet. Please someone respond to me within 15 days.

  NortonAantivirus 2009 is an old product and probably now obsolete.  Plan to install the excellent anf FREE Microsoft Security Essentials instead.

• Suddenly, that I can not connect to Skype on desktop Win10

  Hello

  (V. 7.29.0.102) Skype works normally on my Windows desktop of 10 without problem until today. Now when I try and sign it is said that "sorry, we did not recognize your connection details. Please check your Skype name and password and try again. »

  After checking service problems on the heartbeat blog, I tried many things are:

  (1) I can connect to the web version of SKYPE and make calls with the user name and password, so I that I have as well a connection internet and a valid username and password.

  (2) I followed the "https://blogs.skype.com/2014/03/18/the-ultimate-guide-to-solving-skype-sign-in-issues/" Ultimate Guide to fix this problem without success:

  (i) I deleted the file shared.xml with '% appdata%\skype'

  (II) I deleted the DbTemp file using ""% temp%\skype " "

     (III) I renamed the folder Skype Skype_old with '%AppData%'

     (IV) I uninstalled and reinstalled Skype.

  (v) I have reset the password.

  (VI) I checked my Norton Firewall allows Skype traffic.

  (VII) I tried different unused ports above 1200.

  (VIII) I tried to connect with other accounts.

  All these attempts don't turn on signing the Office of enforcement.

  At one point, I ran a diagnostic utility program and he said my Skype was not compatible with my system. What I find difficult to understand because it worked before today and I have not to my knowledge are adding new software for my system in recent weeks.

  The last suggestion is to check with the community.  Perhaps there is a step that I forgot.

  This could be a regional problem of the Skype Down? http://downdetector.com/status/Skype/map/

  Your advice would be most appreciated.

  Michael

  MOD Edit: Edited post to remove the information personal & consistent with the Skype community guidelines

  The SOLUTION FOUND ... and what I've learned about the blockage at the level of the device!

  SOLUTION, the SHORT VERSION: there is an automated system that detects several Skype represents signatures on a single computer device using the Desktop Skype application and that the automatic system can block future sign-in on a particular device for safety reasons, when more than 2 accounts have been detected.  To unblock a DEVICE-LEVEL-BLOCK by the Office of Skype system you must contact Skype supports services to have the block studied and eventually deleted. It can take a number of days to pay, for three days in my case.  In the meantime, a workaround is to use Skype web.skype.com based portal or another device to the computer, assuming that there is No an account level problem with signature on an account himself.

  SOLUTION, the LONG VERSION: as I said earlier, I had climbed blocked Application Desktop Skype connection problem to chat services online technical support of Skype that had tried to solve the problem using control tests remotely from my office. After you have determined that the problem was not the application itself, or my account itself, they concluded by saying that "I've check (sic) thanks to our superior team and we discover that there are some restrictions on your device to use your account Skype is why you can't connect." "So you have to climb (sic) that our technical team of level 2 so they (sic) fixed this issue.  (My side thought: a good command of the English language doesn't seem to be much in vogue on the Internet chat these days!...) LOL)

  Having learned it may take 24-48 hours to respond to level 2, I waited. Wednesday evening (about 83 hours later), I received an email from an escalation to Global escalation Services analyst who made me know the block had been removed and that I could try to reconnect.  It worked.  I've been in.  Joy!

  Not content to let just there, I followed with Skype support services again the next morning by chat online and learned the following interesting information.  "There [was] a restriction on the device you are using." ... "Just stop OK to connect to multiple Skype accounts on your device. ... The system detects the Skype account that logs on demand. "I then wanted to know" which means that the different members of the family can not use this machine to connect to different accounts? «The answer was, "they can try to connect, but it's better if you can allow only 2 accounts to use the desktop.» ... It's automated system and the system will detect it. »

  So what I learned from this experience.  Skype Desktop application system keeps track of which accounts you log in every device, and when it detects multiple accounts logging on the same device... at some point, it can trigger a DEVICE-LEVEL-BLOCK on Skype Desktop of this particular system application in order to avoid the risk of abuse.  This means that each device from the computer, or possibly the application itself must have a unique number that identifies the device to Skype and allows a track whose accounts are connected in this device.  If the system detects potential abuse, it will block this device of signature on a Skype account ID using a Skype Desktop application.  This device-level-blocking apparently does not work using the web based Skype portal at web.skype.com.

  I can understand the need for Skype for safety and to protect their services against abuse.  In my case, having more than two accounts, log on to the same device triggered a block device on the scale for all the accounts, with the exception of their test Skype account, when you use the desktop application for Skype.  This is something to know.  Work around if more than two users want to use Skype on the same device seems to use the Skype beta portal to web.skype.com instead of the Skype application.  I hope that this information will be useful to other users of Skype.

• Can not connect with the FTP using NAT server.

  Hey, people!

  One machine in the net 200.2.2.0, with ip 200.2.2.222 (ftp client) must connect

  with a server FTP, using the ip 201.1.1.222 nat, but who can not connect.

  A newspaper using, serial interface, I saw the server response to the connection request.

  Using a different disconnection, in fas0/1 of the interface, I don't see the response from the server, I can

  not to see if nat has been done.

  Why?

  What's wrong?

  What can I do?

  To put this machine in another NET, 201.1.1.0 is so hard!

  Look, a router interface has ip 201.1.1.1.

  !

  interface FastEthernet0/0

  IP 201.1.1.1 255.255.255.0

  No cdp enable

  !

  interface FastEthernet0/1

  IP 200.2.2.2 255.255.255.0

  IP nat inside

  No cdp enable

  !

  interface Serial0/0

  Description INTERNET

  IP 100.100.100.30 255.255.255.252

  NAT outside IP

  No cdp enable

  !

  IP nat inside source static 200.2.2.222 201.1.1.222

  no ip address of the http server

  !

  Thanks in advance,

  Renato

  Hello Renato.

  also, it shouldn't make a difference, because your access list allows any last statement, try and add the following line to your access list:

  access list 103 permit tcp a whole Workbench

  access list 103 permit tcp any newspaper host 201.1.1.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 201.1.1.222 eq ftp - data

  access list 103 permit tcp any newspaper host 200.2.2.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 200.2.2.222 eq ftp - data

  access list 103 permit tcp any any 0 65365 range journal

  access-list 103 allow udp everything any 0 65365 Beach

  access-list 103 permit icmp any any newspaper

  access-list 103 permit ip any any newspaper

  Also, try to remove the access list together and see if that makes a difference...

  Kind regards

  GP

• SG300-10 can not connect

  I bought a new SG300-10 registered in fine and updated the firmware to the latest version...

  Played with it for a day (various settings configuration etc.) and everything was great

  I have it turned off and took this site - it works and he got the IP - tried accessing the login page and all I get is this page

  http://192.168.3.54/cs25c53de0/config/log_off_page.htm

  Note that the IP is obtained from DHCP

  I can not connect - this page is all that will load - 3 browsers all the same

  I have reset the default switch - rebooted and access the page default to 192.168.1.254 IP management - exact same page

  http://192.168.1.254/cs25c53de0/config/log_off_page.htm

  What is the problem with this switch? Why is a page of logoff instead of a login page?

  Three different browsers - have you tried another machine?

  Have you tried the old trick 'clear cookies and history' in the browser?

• why I can not change the method of payment and my billing information?

  why I can not change the method of payment and my billing information? By clicking on the buttons right just does not work

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone (do not support the weekend)...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Why I can't connect to the analytical Server

  I use the 9 system, analytical Server succeeded started.but I cannot connect to a server that is analytical and cannot create application, database... but can create variable, function, macro,
  the error log is described as:
  Analytical server: t3 com.essbase.eas.essbase.defs.ServerCommands.Connect November 13, 2008 12:14:35 PM CST
  Error: 1042003: [11001] network error: unable to locate [t3] in the Hosts file
  the server and the client installed in my computer, and deploy analytical server to share server via configuration untility, but why can not connect, so strange!

  Have you tried to connect to the server using the IP address instead of t3 analytical?

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports