Why I can't make a selection with my selection of the path tool?

Similar Questions

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• When I make a selection using the lasso and try to copy the selection, nothing is copied.  Why?

  I have PhotoShop CS6 for Mac, version 13.0.6.  When I make a selection using the lasso (or any other selection tool) and select 'Copy' and try to move the selection copied, nothing is copied.  What is going on?  I can't find an answer in my search for Abobe PS or the Web site, in general.

  If you still use the selection tools when you try to move the contents of a selection, it will simply move the selection. If you want to move the content, use the tool move (but be aware that the default action is to cut; use Opt (Alt on Windows) to copy the selection by dragging).

• can I make a website with Muse that can use credit cards?

  Can I make a website with Muse who uses credit cards?

  Hello

  Muse is a design software. To be able to provide the functionality to use the credit card, you need a hosting server where you can configure your payment gateway, store your database, etc... You can add a form to use the credit card on your site of muse if you can get the form code. Alternatively, if you host your site on Business Catalyst, it has the available ecommerce function. You can use ecommerce for the sale of products, subscriptions, event bookings, etc.

  Kind regards

  Aish

• How can I make my smaller mailboxes, so that all the stuff does not appear after that I have opemed it?

  The email I'm reading is very large with a lot of things that I did not need to see. How can I make my mailbox smaller?

  Remove the stuff that you don't need to see and to compact the folders later.
  http://KB.mozillazine.org/Compacting_folders

• How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  If you want the formula is the same (B2 - C2) in the cell of each column you must change it as ($B$ - 2$ C$ 2). Then copy it, select the whole column and paste.

• Can I buy a PC with Windows 8, install the free 8.1 update, then install the Pack Pro 8.1?

  Can I buy a PC with Windows 8, install the free 8.1 update, then install the Pack Pro 8.1?

  Thank you for your response. Curiosity you have done yourself, or find that it documented somewhere? I look around on the Microsoft store and support pages. I would not buy Pro pack, open it, and then not be able to return if Windows does not allow me to install it.

  I personally, doesn't have Windows 8, 8.1, but the same principles apply to Windows set level 8.1 to Windows Pro 8.1.

  Step 1:

  When you receive your new Windows 8 PC, apply the latest Windows updates. Its likely your machine may not have been updated in months if he was sitting in a box on a store shelf or in a warehouse.

  Step 2:

  Backup installation of Windows 8 pre-installed:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Also check the manufacturer's documentation to learn how to create a recovery media where you do not have an external hard drive.

  You can also create a recovery disk using a USB key.

  Press the Windows key + W

  Type: create the recovery disk

  Make sure you have a USB stick with enough space

  Plug it in

  Check the option copy the recovery partition

  Follow the instructions on the screen.

  Step 3:

  Upgrade to 8.1 Windows

  http://techingiteasy.WordPress.com/2013/10/17/how-to-upgrade-from-Windows-8-to-Windows-8-1/

  Step 4:

  Purchase and upgrade to Windows 8.1 Pro Pack

  Press Windows + X

  Click System

  Click on get more features with a new edition of Windows

  Follow the instructions on the screen to make your purchase online.

• can I make a program start that ceased in the configuration of the system

  In the system configuration - some programs - arrested say window - how can I make them say to run

  In the system configuration - some programs - arrested say window - how can I make them say to run

  Back to your window system configuration > Startup tab...

  To activate = check the box opposite.
  To disable = uncheck the box in front.

  Finally, the brand down the programs/applications you want to START...

  Start button > Search box, type ser > press the Enter key > scrolling of the list of the programs/applications you want to start > until it clicks > column to the left, click Start > OK when finished.

  HELLO THANKS FOR YOUR RESPONSE - BUT THE BOX IS CHECKED BUT IT SAID STILL - STOPPED - I BELIEVE THAT I DID THIS BECAUSE I WAS MISSING GAMES AND OVERLOADED THE SYSTEM AND LENGTHENED IT APPEARS TO BE DAMAGED.

  Have you tried the 2nd suggestion from the same answer?

• WHY DOES LR SEND FILES TO PSCC2015 WITH EDIT INCLUDED IN THE NAME, AS STATED IN YOUR LITERATURE THAT IT SHOULD?

  WHY DOES LR SEND FILES TO PSCC2015 WITH EDIT INCLUDED IN THE NAME, AS STATED IN YOUR LITERATURE THAT IT SHOULD?

  Sylvie at Photoshop General Discussion

• Make the selection of the path is reversed!

  As always seems to be the case, suddenly and without warning, and even if I did NOTHING WRONG... OK, I'm sure I did SOMETHING, but it's super annoying HELP!

  I normally bubbles for comics by a selection of oval around the text, and then using the path tool to draw the little arrow and add it to the selection. But for some reason, whenever I do now, it selects the entire screen except for the part where is the path. It is essentially reversed.

  What should I do? Just reverse the selection won't work because I lose my oval in this way. Redraw it works, but it's a pretty inelegant solution to the problem.

  With the pen tool is selected, you have the button to subtract from path area ?

  

  If so, press the button Add to path area to the left of it.

  -Christmas

• Can't find Script engine "VBScript" for Script alongwith the path of the file

  Original title: Vb Script engine

  Dear all.

  I downloaded the update to Android 2.2 Froyo on motorola Web site. When I run the exe, I get a message, can't find Script engine "VBScript" for Script alongwith the path of the file. Once I click Ok, the exe execution is aborted. Please suggest a solution for this problem. I have Windows Home Premium 64 bit OS

  Rgds,

  Sachin.

  Hello

  1 did you change on your computer before this problem?

  2 are you able to install any other software on your computer?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system, I would say you follow these steps and see if it works very well.

  Method 1

  Try to install the program in high mode.

  (a) right click the program.

  (b) select run as administrator.

  Method 2
  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.
  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.
  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.
  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:
  DllRegisterServer in vbscript.dll successful.
  e. now right-click on the Setup file of windows cleanup utility and select run as administrator.

  Method 2

  If the problem persists, you can run the System File Checker and see if it works fine.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check whether the problem is resolved.

• What determines the strategy of selection of the path?

  If I attach just an ESXi host to a SAN that has one or multiple LUNS, how the strategy of selection of the path will be selected?

  It will always be SRM at the beginning? Or could itself select for fixed DS?

  to be more precise - claiming rules do not define the default PSP. Only, they define what Multipath ESX Plugin will use for the corresponding rule.

  Then the Plugin will be pickup the plugin of Type array of specific (ATAS) storage for storage device you or will use the default if there is no matching ATAS.

  Each HOME has its default path of selection Plugin, but you can always change it by using the ESXCLI command.

• Why I can't get a hit with the find/replace glyphs palette. Faces of fonts checked.

  

  I received a copy (word doc) with a table using glyphs Sq Root in place and place check marks. Looking to find replace but GREP and text can't seem to manage the ROOT SQUARE or check MARK glyphs. If the glyphs tab of course right?

  Providing I still exact characters corresponding and no delicate Adobe fonts not anchored object with font substitution, that I can't seem to make a match with the glyph of the SQUARE ROOT.

  No idea why? Attack from a previous thread on my confusion even find these glyphs of fonts that appear to contain them who do not.

  Hey thanks for this tip, I've seen this kind of keyboard shortcuts commands, but never thought to use it in this situation. It turns out that, because the glyph is in a table , I need to set the "Include locked layers and locked objects (FindOnly)" even if the layer is not locked, I suppose that the tables are "locked" per class.

  

• How can I make several quiz with their own slides of results within a project of 7 Captivate?

  7 to Captivate a project I want to create multiple quizzes with their own results slide.

  Currently I have 5 Quiz that all are related to 1 result slide.

  Is there a way to give each set of questions their own slide of results?

  (I saw an answer to a similar question for Captivate 5 of 2012, but I could very much use out and I thought there was an easier way in Captivate 7).

  Any help would be appreciated!

  Thank you!

  You can use an interactive object (button, click box, form) and the command 'Open URL of file' and point to the cptx file. It is important that you keep all the files in the same folder and the path to the parent of the file. Publication, same scenario: keep everything in the same folder when downloading. CP stands to be linked SWF.

  Lilybiri