why I get this error Rundell C:\WINDOWS\ivoqadir.dll

My friend has a Rundell C:\WINDOWS\ivoqadir.dll windows error cannot find C:\WINDOWS\ivoqadir.dll or similar, whenever he starts his pc (Windows XP 32-bit)

Any suggestions how to fix this? Although everything seems to work fine!

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
Here are the detailed instructions that protect you and solve your problem in the 'right' way.
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
. There is no cancellation or exit without saving the option in regedit.
Here is a link to a popular registry backup tool:
You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
Scroll through the list and look for a boot entry associated files in the error message.
If you can't find on the connection tab, look in any tab.
You can also click file, search to search for logon, or any tab for all or part of the name of the element.
Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
Given that your system has or has had an infection, follow up with this:
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.

Tags: Windows

Similar Questions

  • Please someone tell me why I get this error, as my D: recovery drive has 3 GB of space on 28, I don't know how to delete it and it may be the cause but I'm not sure, that's why I'm here :(

    The error is the reference 0x00c91187
    memory 0x47be01e0. The memory could not be read

    Here is a link to the screenshot of my http://tinypic.com/view.php?pic=1e56v6&s=8#.VCyjYPldVOZ error

    I don't know why I get this error and its very annoying, my hard drive has 3 GB of space for 28 gigatbytes, why is there so much space taken up there and how I delete it without hurting important files

    It dose it when you try to run an apillication game. or other

    Sorry for not being detailed

    I hear by clear weather, how to free up space on my D: recovery drive?

    and I am referring to the game app is soldier fonts 2, it gives me error when I start the game

    and no, I only get this error with the soldier make game 2 application only

    and here's a better link RII

    Sorry for the inconvenience

    http://Tinypic.com/view.php?pic=1e56v6&s=8#.VC3GRfldVOZ

    OMG IT WORKS SO BAD, I HAD TO UPGRADE TO WINDOWS 8.1 WAHOOOOO

  • Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

    Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

    Is working this morning!

    Depends on your operating system

    Go to google, try typing in

    Change the Windows permissions

    or

    Change the permissions of Mac

  • I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

    I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

    C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

    As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

    What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
    You could also disable the offending boot entry via msconfig > startup if it shows up there.

    Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
    04 entry in the log from hijackthis should look like the example below.

    "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

    O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

    http://free.antivirus.com/HijackThis/

  • Why I get this error? dblink

    Why I get this error? dblink
    SQL> desc Worksh@PASS;
 Name                   Null?          Type
 --------------------- --------   --------------------
 PLId                  NOT NULL       CHAR(15)
 LineID                NOT NULL       NUMBER(10)
 ScreenLineId          FLOAT(49)
 Location              VARCHAR2(10)

SQL> select * from Worksh@PASS where  PLId = '00000CB00000000';
select * from Worksh@PASS where  PLId = '00000CB00000000'
                                           *
ERROR at line 1:
ORA-00904: "PLID": invalid identifier
    Published by: 831050 February 10, 2011 13:06

    Looks like you have a case-sensitive installation. Use double quotes:

    select * from "Worksh"@PASS where  "PLId" = '00000CB00000000';

  • I get this error during the windows WindowsUpdate_8024A000 updates

    I get this error while the vista sp2 update is there any solution for this? WindowsUpdate_8024A000

    Hello
    The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

    I would like for you to perform general troubleshooting steps for Windows Update.
    Method 1: Try to run the fix - it of the article mentioned below, if you not him have not yet tried.
    The problem with Microsoft Windows Update is not working:
    http://support.Microsoft.com/mats/windows_update/
    Method 2: Scan run SFC. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:
    sfc/scannow
    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833
    Method 3: Check the hard disk for errors:
    See: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
    Note: Check hard drive for errors will check the bad sectors on the hard drive and repairs. During this process, there is a chance of losing the data in these sectors. Please back up the data before performing this step.
    I hope this helps.

  • When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

    When you try to run a system recovery I get this error; OxcOOOOOOf

    Original title: error OxcOOOOOOf

    My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."

    If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

    File: \Windows\system32\winload.exe

    Status: OxcOOOOOOf

    Info: Seelected entry could not be loaded because the application is missing or damaged.

    It does not work. Suggestions and no, I have not modified before the crash.

    I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

    Hi Anthony206,

    Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

    From now on, you can only contact OEM for the use of the recovery feature.

    I hope this helps.

  • Why I get this error message: error while trying to synchronize audio and midi?

    I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

    Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

    If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

    Sometimes that power and the lexicon solves the problem...

    If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)

  • during the installation of Windows XP, I get this error "the ordinal 410" "urlmon.dll" not found. Is there a way to do anything with XP. I'm in the middle of the installation

    My PC has a virus where it could not display icons, taskbar just shows the background wallpaper... my last resort is to reload XP... so I started and got this error "the ordinal 410" "urlmon.dll" not found.

    Hi Dodamoda,

    Thanks for posting. Do you get this error when starting Internet Explorer or some other place? Also, you said that the last resort was to recharge. Reload you the entire operating system already? Regarding the DLL error that you've published, please follow the article below the link if this problem is when you start Internet Explorer.

    http://support.Microsoft.com/kb/254490

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Why I get this error message (updated as Lightroom CC/6 - updated Juni 2015 ist nicht anwendbar. Fehlercode: U44M2P28)?

    updated LR LR 6.1 6.0, I get this error message:

    As Lightroom CC/6 Update - June 2015

    Update ist nicht anwendbar. Fehlercode: U44M2P28


    U44... Update error http://forums.adobe.com/thread/1289956 can help

    -U44 more... discussion http://forums.adobe.com/thread/1275963

    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • I get "RUNDLL error loading C\Windows\arelasiwitafabiz.dll." when I start my system.

    Original title: my first RUNDLL error.

    At startup, there is a small window on my desktop saying RUNDLL error loading C\Windows\arelasiwitafabiz.dll.

    It disappears if I click OK, but always returns to the start. I downloaded a couple of registry cleaners; It is on the advice of the other forums, being a registry patrol, but I later read this was a suspicious program, so I removed it. In fact it seems to be a large number of suspects in programs offering assistance, so now don't know what to do. Finally what effect an error RUNDLL has on a computer. Any help please

    The 10 landfills, three were from 2009 so I don't check those out.  Four were on 8 June, two of 14 may, and one from May 17.

    Finding bugs were IRQL_NOT_LESS_OR_EQUAL (4) or INVALID_WORK_QUEUE_ITEM (3).  INVALID_WORK_QUEUE_ITEM bugs were all attributable to the sunkfilt.sys on December 8, 2004 - the "USB driver for the 6 in 1 media card reader" (your system is a HP?).  The suggestion would be to update the driver, or off the device if you do not use.  Finding bugs IRQL_NOT_LESS_OR_EQUAL were of same and all inconclusive - not irrefutable.

    I would say that running chkdsk, and if you have a disk XP,SFC/scannow [Moreover, this], starting with.

  • Why im getting this error: "ORA-22813: value of the operand exceeds the limits of the system.

    HI EXPERTS...

    Please helpme to fix this...

    I have a database of oracle 11g, runnint on a Windows Server 2008:

    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production

    I have two tables:

    CREATE TABLE UTILS. SEG_ROLES

    (

    VARCHAR2 (12-BYTE) APPLICATION,

    ROL VARCHAR2 (12-BYTE),

    USERS VARCHAR2 (255 BYTE)

    )

    TOGETHER TO DEFINE

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ('MULTIPLAN', 'ADMIN', 'ADMIN');

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CAR01', 'PATY');

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CAR02", "FABIOLA, ERIKA");

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CON01', 'LUCY, PATY');

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CON02', 'VALERIA');

    COMMIT;

    CREATE TABLE UTILS. SEG_ACCESOS

    (

    VARCHAR2 (12-BYTE) APPLICATION,

    ADMROL VARCHAR2 (12-BYTE),

    VARCHAR2 (20 BYTE) MENU,

    OPCION VARCHAR2 (20 BYTE),

    TYPE VARCHAR2 (5 BYTE),

    OBJETO_MENU VARCHAR2 (40 BYTE),

    ACCESO VARCHAR2 (2 BYTE),

    ROLES_ACCESOS VARCHAR2 (255 BYTE)

    )

    TOGETHER TO DEFINE

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "ROOMMA", NULL, am', 'm_coloca', the of ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "PUT", "PREVALIDA", "SM", "sm_prevalida", the from ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "PUT", "PRECOLOCA", "SM", "sm_preColocacion", the from ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", 'ADMIN', 'LOVE', "COLOCACIÓN", "SM", "sm_colocacion", the from ', "CAR01");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "PUT", "REGCOLOCA", "SM", "sm_regcoloca", the from ', "CAR01");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", NULL, am', 'm_PLD', the of ', "CAR01, CAR02, CON01 CON02");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "LN_CONSULTA", "SM", "sm_PLD_LNConsulta", the from ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "LN_BARRIDOMASIVO", "SM", "sm_PLD_LNBarridoMasivo", the from ', "CAR01");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "REP_INICICLO", "SM", "sm_PLD_ReporIniciclo", the from ', 'CON01, CON02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "LN_BITACORA", "SM", "sm_PLD_LNBitacora", the from ', "CON01");

    COMMIT;

    - And this point of view:


    CREATE VIEW UTILS. VW_ROL_USER AS

    Select distinct APPLICATION, ROL, trim (column_value) USUARIO

    from (SELECT APPLICATION, ROL, USERS USER

    FROM UTILS. SEG_ROLES

    WHERE IT IS NOT NULL TO USERS

    ORDER BY APPLICATION, ROL

    ) t,.

    XMLTable ((' «' ||)) Replace (USER, ",", "",""). '"'))

    order by APPLICATION, ROL, trim (column_value)

    CREATE VIEW UTILS. VW_ACC_ROL AS

    Select distinct APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, trim (column_value) ROL

    (SELECT APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS ROL

    FROM UTILS. SEG_ACCESOS

    WHERE ROLES_ACCESOS IS NOT NULL

    ORDER BY APPLICATION, ADMROL, MENU, OPTION

    ) t,.

    XMLTable ((' «' ||)) Replace (ROL, ",", "",""). '"'))

    MENU, TYPE, OPTION, APPLICATION control, trim (column_value)

    CREATE VIEW UTILS. VW_SEG_ACCESOS AS

    SELECT VACR. APPLICATION, VACR. MENU, VACR. TIPO, VACR. OPCION, VACR. OBJETO_MENU, VACR. ACCESO, VACR. ROL, VUSR. USUARIO

    FROM UTILS. VW_ACC_ROL VACR,

    UTILS. VW_ROL_USER VUSR

    WHERE VACR. ROL = VUSR. ROL

    ORDER OF VACR. APPLICATION, VACR. ROL, VACR. MENU, VUSR. USUARIO, VACR. TIPO, VACR. OPCION

    When I ask the last posting, it works fine:

    SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG

    But when I add conditions:

    SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG

    WHERE VSEG. APPLICATION = "MULTIPLAN.

    AND VSEG. USER = 'PATY '.

    It generates this error:

    ORA-22813: value of the operand is greater than the limits of the system

    Cause: The value of the object or the Collection was too big. The size of the value might have exceeded 30 k in a context of TYPE, or size may be too large for the available memory.

    Action: Choose a different value, and try the operation again.

    Why?

    Thanks in advance...

    Finally found a SOLUTION at: http://stackoverflow.com/questions/14328621/oracle-10g-splitting-string-into-multiple-rows

    just change the way we create the view using the regexp_substr.

    CREATE VIEW UTILS. VW_ROL_USER AS

    SELECT distinct trim APPLICATION, ROL, (regexp_substr (USERS, ' [^,] +', 1, level)) USER

    FROM UTILS. SEG_ROLES t

    WHERE IT IS NOT NULL TO USERS

    CONNECTION BY instr (USERS, ',', 1, level - 1) > 0

    order by APPLICATION, ROL

    Thank you all

  • Why I get this error and how to fix it?

    I'm new to actionscript. I followed a tutorial on lynda. I am trying to learn how to create flash games. I'm using flash cs4. The tutorial uses ActionScript 3.0 and flash cs3. I added a clip to my library and permit to export for actionscript. I got a dialog box indicating "a definition of this class is not found in the classpath, then it will be automatically generated in the SWF export." I click ok. Then, when I try to test it, I get an error that says "call to possibly undefined method '. What exactly am I doing wrong?

    It works fine for me.  Adjust you the binding class to the cursor name in the library as well?

  • Why I get this error message?

    Why do this error and how to fix it?

    Query:
    < name cfquery = "yearlyChart" datasource = "#dsn #" >
    SELECT sum (distance) AS yrDistance, walkDate
    OF bockWalk
    WHERE the year (walkDate) = #year (Now ()) #.
    GROUP BY month (walkDate)
    < / cfquery >

    Error:
    You tried to execute a query that does not include the specified expression 'walkDate' as part of an aggregate function.

    When I deleted the table style attribute it worked correctly. So I think you just need to tweak your xml file some.

    Trevor

  • BlackBerry smartphones 'Backup Assistanmt met with a security error. Please check the application authorization"why I get this error?

    And my phone lose all other functions (i.e. alarm) when this error came. It's like its offline... How can I fix it?

    Normally, this has to do with the policy settings on your desktop computer. If you use a computer, you need to user or rights the administration of power for what you want to do.

    If you are on your home computer, fix your settings so that you are the administrator on your computer.

    What I describe is a common reason where I found that the computer will not back up the files from the phone on the hard drive.

    Jerry G.

Maybe you are looking for