Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

Similar Questions

• I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

  I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

  Are all the other apps open while you try to do this?

• The operation cannot be completed because you do not have the necessary permissions.

  The operation cannot be completed because you do not have the necessary permissions. This is the message I get when I want to create a new folder. I don't have this problem until recently. 1.

  How should I do?

  2 is that there is a security breach?

  I use sierra but, I had the same problem with el Capitan

  When you try to create a new folder? is it an external device? your office? a NAS?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• {The operation cannot be completed because the item "sauerbraten_2013_01_26_collect_edition_macosx.dmg" is in use.} appears when I try to empty the trash. It clearly refers to a set of type "shooty" I thought I had removed 12 months ago. Any ideas?

  Old-fashioned persists!

  Make sure that it is unloaded from the side bar of the Finder.

• Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Moving backups Time Machine - the operation cannot take place because the backup item is not editable

  I want to change the external hard drive that I use for my time machine backups. I went through the steps listed here:

  Time Machine: How to transfer backups from a current backup disk to a new backup drive - Apple Support

  It seems to work correctly. I shot TM back and adding the new drive. TM is now backing up files on the drive up, but there is a problem.

  For some reason, TM has begun to put backups "freely" for lack of better in the external hard drive, and not in the backups.backupdb folder for a week, then returned to save them in the backups.backupdb > ComputerName > files from backups. So in other words, when you click on the hard drive in the finder, it opens the player and you see a folder named Backups.backupdb and then a bunch of mixed in which files are backups time machine named 2016-01-24-XXXXXX, etc.. When you go to the folder Backups.backupdb, there's a more random "loose" time machine backup file 2016-01-23-XXXXXX, and then another folder with the name of computers and in the folder are all TM backups except loose ones I mentioned earlier.

  It seems that TM is working properly now, but I don't know why he put the files from the first days outside the backup folder. However, when I do drag, I get the error:

  The operation cannot be completed because backup items is not editable

  I want to just put all the files in the right folder so that I can A) keep my disk organized and (B) ensure what TM can find everything correctly should I have to go back.

  No idea what is happening and how to fix it?

  Although the documentation Apple says you can copy Time Machine backups in the Finder, it is very slow and sometimes does not.

  This technique works only if the volume that you copy to the same size or larger that that you are copying to.

  First of all, please open the Time Machine preference pane and click the Select Disk... button. You may be able to unlock the settings first, by clicking on the padlock icon in the lower left corner of the window. Log in as administrator.

  Remove the volume you want to copy in the list of backup destinations. Then turn off Time Machine.

  Launch disk utility, open the built-in Help and search for the term 'Double '. Follow the instructions. All existing data on the destination volume will be deleted. That shouldn't be a problem, because you do not want to mix non-sauvegarde and backup data on the same drive anyway.

  If the volume you are copying has been encrypted by Time Machine, you must first unlock it. Click the release button in the toolbar of the disk utility window.

  Turn Time Machine back on and select the new volume as a backup destination. Alternatively, you can continue to use the old volume, if you wish. Both will be alternated when both are available.

  ATTENTION: If you copy the volume is corrupted, as shown by the ERD or first aid in disk utility, while corruption is copied to the new drive. Do not copy data from a damaged on a faulty disk volume. Put aside the reader and do not use until you don't know that you no longer need the data. Then securely erase it and bring it to a recycling center. Do the same if the restore operation fails with "disk errors."

• I GET A BOX TELLING ME MY COMPUTER IS TRYING TO IMPORT PICTURES AND FAILED, I WANT TO TRY AGAIN? I DON'T KNOW WHY I GET THIS MESSAGE

  WHEN I GET FIRST IN LINE... AOL.COM

  I GET a BOX ON the BOTTOM RIGHT, TELLING ME THAT MY COMPUTER is TRYING to IMPORT IMAGES AND THAT accused had FAILED, THEN,

  I WANT TO START OR CANCEL?  I HAVE TO CANCEL BECAUSE I DO NOT KNOW WHAT IS PAST...

  AND DO NOT KNOW WHY I GET THIS MESSAGE, OR HOW TO CORRECT.   HELP APPRECIATED.

  RUTH

  Hello Ruth,.

  No problem. Three scanners malware (Malwarebytes, SuperAntiSpyware and browser cleaner) will coexist with your AVG & Lavasoft programs without problem. Both antivirus scanners are specifically designed to work with your antivirus applications without causing conflicts. Its safe to use all five of these applications, including only 2 will remain on your computer (Malwarebytes and SuperAntiSpyware), so the other 3 are one time only use.

  Give them a call and see what they find. Post your results here and let me know how you fare.

  Kind regards

  BearPup

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• Please someone tell me why I get this error, as my D: recovery drive has 3 GB of space on 28, I don't know how to delete it and it may be the cause but I'm not sure, that's why I'm here :(

  The error is the reference 0x00c91187
  memory 0x47be01e0. The memory could not be read

  Here is a link to the screenshot of my http://tinypic.com/view.php?pic=1e56v6&s=8#.VCyjYPldVOZ error

  I don't know why I get this error and its very annoying, my hard drive has 3 GB of space for 28 gigatbytes, why is there so much space taken up there and how I delete it without hurting important files

  It dose it when you try to run an apillication game. or other

  Sorry for not being detailed

  I hear by clear weather, how to free up space on my D: recovery drive?

  and I am referring to the game app is soldier fonts 2, it gives me error when I start the game

  and no, I only get this error with the soldier make game 2 application only

  and here's a better link RII

  Sorry for the inconvenience

  http://Tinypic.com/view.php?pic=1e56v6&s=8#.VC3GRfldVOZ

  OMG IT WORKS SO BAD, I HAD TO UPGRADE TO WINDOWS 8.1 WAHOOOOO

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

  Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

  Is working this morning!

  Depends on your operating system

  Go to google, try typing in

  Change the Windows permissions

  or

  Change the permissions of Mac

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

• I suddenly can't all sites that I use every day on Firefox to load. I tried to empty the cache. No difference. How can I fix it?

  I use Firefox every day to access many sites. Yesterday, it worked perfectly. Today, that it won't work at all. I just get "Unable to connect" message when I try to load websites - and sites work on other programs (even if I need to use firefox to do certain things on some of them...) so it is not a problem of internet access. I read the help articles and they help at all. I tried to empty the cache. It makes no difference. I tried to check that no proxy is highlighted under the advanced access settings. It is, and see which makes no difference. I tried looking to see if Firefox is permitted to access the web through my windows computer - but I can't say what program he would need to connect. And I have not changed my settings since yesterday - when it worked perfectly (or seems to). That shouldn't be the problem.
  Ive wasted most of the fights with this morning. What the hell is going on here and how can I solve this problem?

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox - firefox 23 was released yesterday: solve connection problems to websites after Firefox update

• I don't know why I get this messege sometime

  Your message was automatically rejected: Quota exceeded (user mailbox is full). why I get this for some emails that I send to some of the company

  Exactly what it says. The user's mailbox is full.