why I'm notget hibernation?

Similar Questions

• Satellite C855-2HW guard go to sleep / hibernation

  I have a Satellite C855 2HW and it keeps going standby / hibernation.
  I put everything as maximum performance and never to Hibernate, but he remains in hibernation.

  I do not use the Eco utility (it is off).
  My power cable is attached and I have it configured to never blur the screen, never the stop screen and never go to sleep mode.

  Even in settings advanced of the I told him never to stop the drive and 'never' for all the options standby. The rest is all about max performance.

  I do not understand why it goes into hibernation after a few minutes.
  When I play a movie or something on youtube, apparently not go into hibernation.

  Any suggestions what to do?
  I've posted it here, because I couldn't find myself and thought that perhaps eco utility is always do something to reverse it?

  Hello

  Could you please post information about the system you are using?
  Using Win 7 or 8 Win? As far as I know it was pre-installed with Win 8 64 bit. Is this good?
  When exactly the laptop going mode sleep?

  To my knowledge there are no many options where the Hibernate mode can be configured.
  You can set up sleep auto/upgrade the system hibernate mode in Power Options.
  (Win, x key-> power options

  This feature automatically stops the system in sleep or Hibernate mode when there is no input or material of access for a specified period.

  Also, there is an option called automatic low battery hibernation mode. When the battery is depleted to the point that your laptop operation cannot be continued, the system automatically goes into hibernation mode and turns off.

  Finally and above all specific aspects of Power Options containing the Hibernation mode and the mode 'sleep'.

• Why Portage R700 - 15 p starts automatically after hibernation

  Why Babywearing TOSHIBA R700 - 15 p automatically starts after I put in hibernation, he (or sleep layouts) and close the cover?
  As soon as I take laptop sleep extended with lid closed in my hands to put it in a bag - it starts by itself with closed lid...

  Anyone had similar problem and solution for this?

  Thank you

  > Is there any setting for laptop, or Windows 7 which not is not notebook on the State of Standby/Hibernate when the lid is closed?

  First of all this is not serious if the lid is closed or not a fact is important: notebook is set into hibernation mode and wakes up if USB mouse is moved

  Is the BIOS contains a few options Wake Up, you should check the settings of the BIOS as Wake Up on LAN, Wake up on keyboard etc. turn off these options, save changes and check how it works

• Why is "hibernation" is more displayed - despite also using system restore

  After using 'live one care' security check / clean etc... I am more able to use "hibernate" (sleep, shutdown, restart, lock, change user or lock are the only options) have tried restoring the system without result. How can I return the option to allow me to "setting Hibernate"

  http://support.Microsoft.com/kb/928897

  I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

  See if the information above fix it for you.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my computer constantly goes into hibernation?

  Hi all ~

  Recently, I noticed that my computer goes into hibernation by itself when not used for a period of time. I confirmed that my power settings dictate this behavior so that plugged in or on battery power.
  Instances that I noticed this, mainly, in mode "sleep" overnight and although slow, act as a "wireless card" for my personal router.
  When this happens, it is not hot or lack of power, he is simply there. I can't find a scheduled task so it hibernates, or an action to be left in standby mode or has been inactive for a while.
  I am really confused and would like if someone could provide an answer, or make me on the right track at least!
  Please help, because it becomes very annoying.
  Thank you
  -Crip.
  Summary and things to know:
  My computer into hibernation by itself, is not a scheduled task so it hibernates, it is not any form of action in my settings to be able to dictate the hibernation, it hibernates generally with more than 90% of battery remaining power and is never hot when it enters this mode.
  My computer is a portable set of bridge NOT running Microsoft Windows 7 Home Premium OS.

  Hello Richter,

  We are here to help.

  For hibernation make unavailable, follow these steps:

  1. Click Startand type cmd in the box start the search .
  2. In the search results list, right-click guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. At the command prompt, type "powercfg.exe /Hibernate", and then press ENTER.
  5. Type exit and press ENTER to close the command prompt window.

  Let us know how it goes.

• lost hibernation startup command menu, why can't find it in the power options and enable the Hibernate?

  tried the right click, properties, screensaver, power office and cannot find a way to afford to hibernate again. When I try the "turn Hibernate power" listed in the left hand blue, he takes me in power options, but said that I can choose to quit, sleep or do nothing. don't Hibernate tho.

  Hi Twyla,

  Start with this article: http://www.ehow.com/how_7591373_add-hibernate-shutdown-options.html.  If this is not the case, then discover the many other links and references on that page and I'm sure you'll find something that covers the problem.

  Good luck!

• Why my monitor goes into hibernation every 30 seconds and how to fix it?

  It doesn't matter if I'm on the web, in my yahoo email or file open on my drive C:, my computer times out after 30 seconds, then the screen is replaced with my screen saver.  Does anyone have a solution for this problem?  It's annoying when you constantly have to hit enter so often to return to the previous screen... Thank you.

  Right-click on your desktop--->Properties --->---> set amount of time, before the screen saverthe screen saver tab.

  Good navigation

• Why my computer is in hibernation rather than close?

  I put the control panel so that the power button on my laptop Windows 8 will stop the computer instead of set mode 'sleep'.  When I press the power button, my computer shut down It hibernates.  What I am doing wrong?

  I put the control panel so that the power button on my laptop Windows 8 will stop the computer instead of set mode 'sleep'.  When I press the power button, my computer shut down It hibernates.  What I am doing wrong?

  ===========================================
  Just a guess... but maybe you use... quick start the
  This article explains what it is and how it affects the judgment.

  How to enable "Quick start" On or Off for a hybrid of startup in Windows 8
  http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-Windows-8-a.html

• Why my printer say its OFF LINE?

  Confused about why a screen when I try to print, saying: my printer is OFFLINE. What makes offline when it is clearly now?

  Double U Dee and anyone who reads this, I am pleased to announce that the SUCCESS has been achieved.

  First of all, I had to keep trying and trying to make the download work, again and again. I took this tactic after reading that the PASV Port flight error is random. So my theory was that if I continued to try, I would eventually get the box to download. And I did it.
  

  And here's what I think was happening throughout cause not not at all of a sudden, my printer: when I bought this printer and used, everything was fine... except once a week, I would get a box that says my printer driver was preventing my computer from hibernation (he used another word, but the meaning is the same). I did not continue.

  Then maybe... by unplugging my printer and moving it somewhere else, finally high driver problem its ugly head, first with the OFFLINE area, then just the error message by the document as it is just sitting in the queue...

  AND the problem I had when I uninstall twice and reinstalled it, is not disconnect USB. Because this time, when I keep disconnected and reconnected only when the installation process told me of... the printer then began to work.

  Of course, the above is my theory. But I can say for a fact that correctly install the third time was the charm. 

  Thank you Double Dee U. I followed your 8 steps to the T and can now print. You pat on the back and remember and tell others that you give computer advice excellent!

• Tecra M4: TMESBS32. EXE stops hibernation

  Hi all

  I read the forum trying to learn more about hibernation, standby, and TMESBS32. EXE

  My brand new Tecra M4 wont stanby or hibernation. The problem seems to be due to the TMESBS32. EXE

  Does anyone know why TMESBS32. EXE (see below for information on what it is) could shut down the computer after hibernation, or how I can fix this?

  I'll go in the details below to try to help those seeking information with the forum search tool.

  ---

  My computer worked fine until two days ago. What I did that day was to install updates from Microsoft and burn a CD with Sonic RecordNow! that came with the computer. Since then I could not Stand By or Hibernate mode (using the button in the computer window disable the menu start).

  I looked on this forum, found my log files and a reference to TMESBS32. EXE causing the problem (see below for more details). If I finish this task so I can Stand By and hibernate again.

  ----

  TMESBS32. EXE
  Service Mobile Toshiba Extension Slim Select Bay. Task service / found on Toshiba laptops running Windows 2000/XP, and which allows DVD + CD? Writer to be hot-swappable.

  Log files
  When I go to run compmgmt.msc invites Event Viewer gives me the following warnings:

  Under System
  TMESBS32 refused a request for suspension of power. EXE.

  For more information, see Help and Support Center at
  http://go.Microsoft.com/fwlink/events.ASP.

  [does not help the link]

  Under the Application
  The description for the event (1) in Source (TMESBS) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: TMESBS, Waring!, code: 17 h, CM_Query_And_Remove_SubTreeW ERROR.

  Hi Kelly,

  I think that the idea to your problem lies in the fact that you had previously burned a CD. The TMESBS32 routine is a software designed to monitor the activity of CD burner you in the selectbay so that you can effectively share the device without causing Windows to crash.

  As burn you the CD the TMESBS32 routine is now active monitoring the CD burner so that it can put an end to any associated process if necessary. The fact that this routine is actively followed is enough to keep your laptop in hibernation or on standby. For one of the following options to work then all currently active processes must be able to suspend their activities and write their current status of your hard drive so that they can resume later if necessary.
  I suspect that the TMESBS32 process does not support this facility.

  HTH

• Satellite L10-119: during movie laptop computer into hibernation.

  I wa I watch a movie and then my notebook enter into hibernation. Whenever I try to re - open, allowed the first left to start computer laptop mowing, and that's it. Anyone know why?

  Hello

  Have you used the battery or the AC adapter if you watch movies?
  Also I know the System Standby Automatic/Hibenation feature automatically shuts down the system in sleep or hibernation mode when there is no input or material of access for a specified time.
  To specify the time, click Start, Control Panel, performance and Maintenance, Power Options. The power management tab, you can select time to sleep or Hibernate.

  Please give me a feedback if it works.

  Good bye

• Satellite Pro U300 (PSU31E) standby & hibernation fails after updating BIOS

  Hello

  I wonder if it is common that after the upgrade of the Satellite Pro U300 (PSU31E) of the BIOS 2.50 at BIOS 3, 70 - Win or 3, 90 - Win, do sleep modes and Hibernate the * completely locked laptop computer? *

  After the upgrade, when I try to enter sleep or hibernation, the laptop turns off the LCD and gets locked so it isn't help to press and hold the power button, open/close the cover, press Fn - F3 or F4 - Fn, the only way is to disconnect the power supply and wait until the battery runs down, or simply be very rough and * disconnect the battery *.

  While the Pro U300 is locked, I hear that HARD drive and fans are also swivel - as soon they were when entering standby or hibernation mode. Very ugly behavior - you can FRY your laptop with something like that. I thought that BIOS 3.70 was faulty but unfortunatelly version 3.90 also worthless.

  Furthermore, I can't yet understand why large (70% of the zip file) file of the package to upgrade the BIOS (3.70 and 3.90)... is the portable other flashers log file?

  Your ad, I understand that the screen does not wake up after its entry in the standby or hibernation mode.
  Am I wrong?

  I noticed that Toshiba has released a new version of the Intel graphics driver.
  At this time the update is 02/20/08 and the version is 6.14.10.4831.

  Maybe you should try to update the display driver too check to see if it would help to get rid of this annoying display problem

  I recommend to remove the old version of the graphics driver first, then install the new downloaded driver.

  Mate good luck

• Portege M700 Wacom does not respond after hibernation

  I've been using the M700 for two months and I met a very annoying bug. It is not mentioned in this forum so far, but there are other reports on the Internet who mention this problem too. (http://forum.tabletpcreview.com/showthread.php?t=16902)

  * Question: *.

  Tablet is placed in hibernation. When he wakes up, everything seems OK. When you use the stylus or the key functions, that the cursor does not move. Tablet and pen services have not crushed, but there is no link between screen/digitizer and software.

  + Technical support +.
  The series/USB connector is not reset after waking or hibernation is dead the serial connection

  * I tried solutions *.
  So far, I have reinstalled Vista, tried XP (and will stick to it because it's a better OS in many cases) and have reinstalled all kinds of drivers Wacom.

  * What we want *.
  Wacom has also seems to be aware of the problem but says it's a matter of Toshiba. I am impressed with the construction and the quality of the M700 (it is a replacement for my robust but now almost unusable M200 and I have a M400 too, but I never liked it) and this issue is the only glitch I meet.
  I would like to know if anyone else in this forum has experienced a Wacom-coma after the resumption of the hibernation or standby, and if so, if they have found a solution (apart from restarting their PC)

  And I would really like a response from a representative of Toshiba review of this question.

  Hey Buddy

  I m not a M700 owner and, therefore, I can not say much about this issue, but to my knowledge, there are a few different problems with Vista and hibernation mode.
  For example, device high definition audio, screen WLan failed after the resumption of hibernation.
  These issues were definitely Vista problems.

  Installed on Portege M700 Tablet d River was developed by Wacom, I wonder why the guy States that it is a Toshiba issue?  :| (perhaps because this Toshiba laptop s ;)))

  Anyway, you said that you have reinstalled the driver for the tablet of the Toshiba page and updated the Vista of the State. Check the BIOS updated maybe he could improve the functionality

  If this does not work I recommend you contact the ASP to find out if there is a known issue

• How to turn off the wake-up upward after hibernation when I open the lid?

  I've set up the power button to hibernate your laptop.

  After pressing the button and wait some time to complete the process of hibernation, I close the lid.
  But when I opened the lid to examine, for example, battery charge indicator, laptop wakes up.

  Very annoying. How to disable?

  Why boring. I presume that you n t open the cover for nothing jut so you want to work with your laptop.

  If you see options for standby power, you will see that the option says: when I press the power button. When I open the cover, there is no option called.

  Sorry, but I think that there is nothing to do.

  By the way: in another topic ask you on the eve of power feature. Have you found a solution?

• Satellite P750 waking up from hibernation

  I have Satelitte P750 and Windows 7 home 64 bit.

  The problem occurs after I put in hibernation for laptop. He wakes up without reason (exactly - I don't know why).
  It can be dangerous posibly for my hard drive and data when he wakes up for example in the backpacking trip - I thought that when the laptop is in hibernation may not wake up without user action.

  I looked through the logs of windows, and I think TOSHIBA service station looks suspicious...

  How to activate offf?

  Hello

  Usually the laptop should not reactivate hibernation without pressing a power button, but there are a few options that could affect it.

  Please check the BIOS.
  You can find called Wake LAN up or Wake up keyboard options
  All of these options that might be responsible for this, you need to disable