Why I often see AW SNAP sp?

Similar Questions

• Why do I see a flashing light after hanging my airport extreme?

  Why do I see a flashing light after hanging my airport extreme?

  Use AirPort Utility to find out why the AirPort Extreme is complaining

  Open AirPort Utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the AirPort Extreme

  In the window that appears, look for the status

  What is the message here?

  For a proposed solution, click on the little yellow dot next to status

• After the removal of Windows 10, why do I see Mac HD and Bootcam

  I deleted Windows 10 of my MacBook Pro (version 2009). Now, why do I see two disk: 60 GB Bootcamp and Macintosh HD 99 GB? I expected to see only o

  Hello waxwingDr,

  I understand that you deleted Windows 10, but are still trying to see the drive Bootcamp on your Mac. Let's see if we can understand what is happening.

  The question I have is how did you remove the Windows of your Mac partition. Let me know if you did the following steps, described below.

  If you installed Windows on a drive with multiple partitions

  1. Start your Mac in OS X.
  2. Quit open applications and log out all users.
  3. Open Boot Camp Assistant, and then click on continue.
  4. Select "remove Windows 7 or later", then click on continue.
  5. Do one of the following:
     • If your Mac has a single drive internal, click on restore.
     • If your Mac has several internal drives, the Windows disk, select 'Restore the disk to a single OS X partition' Select to continue.

  Boot Camp: Remove Windows from your Mac
  https://support.Apple.com/kb/PH17861

  There are other ways to correct if you see always the two partitions. Take a look at the following article below that passes on the partitioning of a hard disk. It will be an option to delete a partition and expand your main Partition of Mac.

  Disk utility (El Capitan): partitioning a physical disk
  https://support.Apple.com/kb/PH22240

  Expand a volume

  If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.

  To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device.

  WARNING: When you delete a volume, all data thereon is erased. Don't forget to back up your data before you start.

  1. In the sidebar, select the device that contains the volume you want to enlarge, and then click the Partition button .

  2. In the diagram on the left, select the volume you want to delete, and then click the button Delete .

  3. Click on apply.

     The volume is deleted, reformatted, and all the free space is assigned to the previous volume.

  4. Click done.

  Let me know if it helps.

  Take care

• "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  Hello
   
  1 do you have service pack 3 installed on the computer?
   
  2. what was the recent change in hardware or software performed on the computer before the question?
   
  Please follow the links below to solve the problem.

  Method 1
   
  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  
  http://support.Microsoft.com/kb/883614
  
  Method 2

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer

  If you have verified that your firewall and antivirus are not causing the problem, try adding the following Web sites for the Microsoft Internet Explorer Trusted sites zone on the computer where you use Windows Update. After you have added the following Web sites to the Microsoft Internet Explorer trusted sites zone, run Windows Update. To run this method, follow these steps:

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  o https://*.microsoft.com

  o https://download.windowsupdate.com

  o https://update.microsoft.com/windowsupdate

  o http://*.update.microsoft.com

  o https://*.update.microsoft.com

  o http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  I hope this helps.

• Why can't see my pictures when I open my file and I click on 'VIEW', then I click on "Extra Large, large, medium or small icons"

  Why can't see my pictures when I open my file and I click on 'VIEW', then I click on "Extra Large, large, medium or small icons" only the icon appears with my name in photo below.  I have a heavy task to accomplish and this is a rush rush rush.  Can you help me please?

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?

  Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?  owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED

  Hello

  Thanks for asking!

  This is because the network discovery is turned on.

  If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Reply back with the results. I'd be happy to help you further.

• Please help me and stop send me around why you money see chargin: Welcome to the Adobe® Acrobat® Reader® DC ReadMe file. Acrobat Reader is the free viewing companion for Adobe applications that produce files Adobe Portable Document Format (PDF from Adobe)

  Please help me and stop send me around why you money see chargin: Welcome to the Adobe® Acrobat® Reader® DC ReadMe file. Acrobat Reader is the free viewing companion for Adobe applications that produce files Adobe Portable Document Format (PDF from Adobe). To create, improve, revise, edit, and share information in Adobe PDF files, read more on Adobe Acrobat Pro ms and Adobe Acrobat Standard DC by visiting www.adobe.com/go/acrobat.

  What is your question?

• Why do I see a blank screen instead of my subjects.

  I must have done something this morning for cause of RoboHelp to turn against me. I was trying to add an image to a sentence. I wanted to display the topic and see how it looked and worked. White screen is all I get. I checked other subjects and I get the same white screen of white. Where, what, how, why?

  don't panic - it happens sometimes. Conclusion of HR and to go back, and you should be all set. The white screen of doom that happening much more often in older versions, but once in a great while, it will still happen to me in RH7.

• Why do I see not 08:00 and 08:00?

  Why I see 08:00 after update to iOS10 on all my my iMachines home screens when before I could see the good 08:00. I'm in Prague and hate the format new 08:00 - not to mention the ugly police "BOLD" on the home screen.

  Your clock is set to display in 24 hour mode. Go to settings to change it to 12 HR.

• Why "check to see if the Plugins are up-to-date" web page is ALWAYS case SENSITIVE?

  When I go to 'Tools' / 'Plug-Ins' and click on 'Check to see if the Plugins are up-to-date' he going to Mozilla to check your Plugin Page, but fails to see the plugins or plugins active update status. ( https://www.mozilla.org/en-US/plugincheck/?utm_source=firefox-browser & utm_medium = firefox-browser & utm_campaign = plugincheck-update ) I use OS X 10.10.3 / Firefox 37.0.1 / March-14-2015

  Tried re-installing original report, clear cookies, clear cache and start in Safe Mode, nothing is. Another ridiculous control and there is never any support when things go wrong. Unfortunately, I have received no professional concern, with a competent cause and healing. None. And I had pointed out to me this problem since Firefox 35.0.

  Need info and a difficulty, for months now! Thank you! Whitebuck

  Always ask why, you lose users?

  It is possible that one of your modules (you need many of the privacy modules) is blocking the site, it works for millions of users per day.

  Maybe try to test a fresh Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• Why I can see all the photos on FaceBook with Explorer and I canoe see some using then?

  When I browse my Facebook using Firefox, I can't see some of the pictures. But when I use Internet EXPLORER I can see all the photos on my FaceBook page. Why is this happening? Magda.

  You are welcome

• Why is-view, see the sidebar not available in Photos 1.5?

  See the side bar is grayed out when you view Photos, shared Albums or projects and I do not know why and don't find anything in help.

  What happens if you press command-option - S

  LN

• Why can't see anything in my iCloud desktop application?

  the ipad is brand new and I've done the upgrade to 9.3.1 automatic system. I saved to iCloud and activated the function "Show Desktop". When I opened the icloud, there is nothing. at the bottom of the window (empty), it shows that the space has been used, but nothing to do; other 2 test files, I did... What don't get me?

  THX in advance dave

  its me and my first answer how bout that ive so doing more reading and see that I won't see my content from my icloud. So why is it the app desktop drive to mount on the desktop, so I don't see that anything looks like just in case I need to refresh my memory of what nothing?

  Ive had an apple IIe, an LCII, imac dv 400, Q660/av, anibook 300; always have a blue & White Tower g3, ibook 600, snow all changed a lot and now have the brand new mini ipad 2. Apples also so not really new way of doing things, but it left me speechless

  I was elsewhere and too busy to internet for about 8 years (no, not in prison) and things have changed, there at - it a 3rd party backup free online that will allow Me to see my data and manage myself from there?

• Why not firfox see the footer of my website when IE9 does?

  I made a web site, firfox does not display the content of the entire page... why used see the footer?

  http://home2.btconnect.com/kcaringagency/

  (test site)

  Add a clear: both CSS rule to the DIV .footer

  DIV.footer { clear: both }

• Why can I see cookies only in safe mode?

  [FF 3.6.10] I can read, and delete cookies in safe mode, but in full mode, the list of cookies will appear only as the small triangular icons; If I click on one of these, I see the cookies from this site. But why am I not able to see the name of the site in full mode? This behavior startwed tonight, just after I had recorded a password with a new sit4e I was visiting. THX eda

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.

  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems