Why is a compressed folder, the only choice when trying to make a new folder?

Similar Questions

• At the signing, get popup on unencrypted connection and asking if I want to move forward. The only choice is to continue. Any help on problem solving.

  When signing up, I get a security popup alert that says, "this page is encrypted, the information you entered are to be sent over an unencrypted connection and could easily be read by a third party. "Are you sure you want to continue sending this information." Two blocks, one entitled 'Continue' and a label "Cancel." The only choice that allows me to access provides is "continue". No info is given on what action is recommended to solve the "Security Alert" and I can't cancel the "security alert".

  I guess I discovered it when the security warning message wait a minimum of 1-2, he clicks on continue and that's what I did and I am connected now samething might work for others here as well give it a try

• Often, the monitor stops, and the only way back is to make a forced reboot.

  Original title: Vista OS

  Often, the monitor stops, and the only way back is to make a forced reboot. This happens when my computer is turned on but not used. When I come back to the pc screen is completely out

  Hello joycita,

  It sounds like a problem of power options. Let's try the following.

  1. open Control Panel.

  2. click the Power Options icon.

  3. in power options, see the section "Preferred Plan". Yoiu should have a "balanced".

  4. click on the option "system settings change".

  5. in the change plan settings window, click the arrow to the right of the box next to the option "turn off the display.

  6. in the drop-down menu that appears, click the option 'never '.

  7. now click on the button "Save Changes".

  8. then close the change settings FRO windows plan

  9. now when your monitor remains inactive, your monitor should stay on.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Why a pdf form deletes the same data when they are saved?

  Why a pdf form deletes the same data when they are saved?

  As it has been said, in preferences, JavaScript tab. The first entry activates / deactivates JavaScript.

  (just remember to reactivate after making your tests).

  I hope this can help.

  Max Wyss.

• Why do I get an internal error message when trying to use acrobat reader?

  Why do I get an internal error message when trying to use acrobat reader?

  Hi David,

  • If you are o Windows computer, please try using the cleaning tool to uninstall Adobe Reader, Download Adobe Reader and Acrobat tool - Adobe Labs, in which case you want Mac you have to manually uninstall Adobe Reader.
  • Restart your computer.
  • Install the latest Adobe Acrobat Reader-DC using this link http://get.adobe.com/reader/enterprise/

  Let me know if the problem persists.

  Kind regards

  Nicos

• Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I fix it

  Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.

  Hi JFO58,

  I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs

  Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions

  Kind regards
  Rahul

• Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year). the error is: there was a problem processing your order, please contact our Service team customer care for assistance. AfricaBa North

  Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year).

  the error is: there was a problem processing your order, please contact our Service team customer care for assistance. Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English + 44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French + 44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, the Morocco and the Algeria: + 33 United Arab Emirates 157324642United: 80004443085Commonthwealth of independent States (CIS): + 44 207 365 0735

  Help me please to solve this problem. I need my lightroom immediately)

  Hi mohamed,.

  Please see the link below to buy the plan of photography:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  In case you still have question, please contact sales at Adobe team.

  Adobe Middle East and North Africa

  Kind regards

  Sheena

• I teach a cardio dance class on the inside and I can't give them a many exact calories when class ends.  The only choice is on the Apple Watch is the 'other' and I know that the class Burns 600 calories in an hour, but my watch shows only 250-350 burned. 

  I use my Apple Watch throughout the day and when I teach a cardio dance class, the number of calories is MUCH lower than other materials.  Why is the Watch not count my calories accurately?  The ladies like to know the calories to burn when the class is over and I can't give them using my Apple Watch.  Others in this class that wear the watch tells you how many is not too accurate.  We burn usually about 600 + calories and I'll be happy if my registers 350.  What could be wrong? Thank you!

  Hello

  Do not forget that Apple Watch uses Active calories (those who are burned by orders or travel) as the main measure for the app to training and activity app.

  Many other applications of fitness / devices report total calories, which consists of active calories + calories at rest (that your body is still burning even when you're not active).

  More information:

  Use the activity on your Apple Watch - Apple Support

• HP 6600: why can I not print with only black when I have only black cartridge in hp 6600 as hp 4500'?

  and he always says that color cartridges are leaking so I had to make one more only accepts black and I can not print with only black.

  How can I print with only black when I have the only black in the printer.

  Why only black does not work with the color cartridges.

  What is the error message you see with the color cartridges installed?

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. 5665 envy is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet Pro 8610.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 6600 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  If you do ever print color laser printer would probably be a better choice.  If you occasionally print color but especially black a HPI printer as those in the first category above can be a good choice.

• Why icons keep appearing in the notification area when I checked "hide when it is idle? '?

  I only see "Volume" and "McAfee" after I restarted, because they are the only ones I selected for the show.

  Hi, OHmwp,

  Try the patches that I have listed on your other thread - they record settings

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/why-do-i-have-to-click-on-show-quick-launch/78d1fc14-b359-4776-9375-85a01dff1722

• Why my laptop back to the home page when I try to enter a new address

  WWhen I'll type in a new address in the bar at the top of the screen at the time where I try to enter the first letter, I am taken back to the home screen. I spent out, started again, but the problem still persists. It on happens on Safari, Chrome works normally. Any ideas?

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• Why Windows Media Player plays the song wrong when I click it in a playlist?

  I did a huge selection automatically (with 145 songs) with five-star is Windows Media Player 12 in Windows 7 on my Dell XPS L702X.

  So, let's say that I want to hear "Everybody Hurts [edit]" r.e.m. I click on n, it starts WMP play "Slips through my fingers" by Agneta Fältskog!
  He plays another song which is 24 positions above!
  At first, it used only for touch me when I was sorting the songs in the playlist by Genre, Album, year, etc... But now, even with the contributing artist, he played another song!
  The only way for her to play the song I want is with some navigation arrow keys or when I clicked on the playlist and I'd get a unsorted list. With the unsorted list, I find the song.
  It's a difficult problem, but I have a temporary solution. But please try to find an answer!
  EDIT: now at random. Unsorted perspective will give me wrong songs and the artist's view contributing sort will give me good music! What a mix! Say that it is a "re - Mix"!

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: Try to run the troubleshooting Windows Media Player settings Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Troubleshooting to launch Windows Media Player library.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

   

  Method 3: If the problem persists, try to disable and enable Media Player and check.

  Step 1: turn off Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.
   
  Step 2: Enable the Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Hope this information is useful.

• Why my windows displays in the United States, when im in Great Britain

  When I go to windows update shows im in the United States when I stay in the United Kingdom, Ive changed to uk .when I just off site and back, on his return to the United States. Help

  Hello

  • How have you changed the settings?
  I suggest to change the locale associated with place and time then check. :
  Regional and Language Options overview
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true
  

• Satellite A30: Can not find the COM ports when trying to query the modem

  Hello.
  I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
  Add the port,
  Add more then 1 port
  disable the printer port
  change the printer port
  Reinstall derver modem,
  In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
  If someone help me to solve this problem a little,
  regared.
  MGK.

  Post edited by: mghouskhan

  The modem uses a virtual com port. It s not a real port.
  I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
  Installing the chipset utility is important

  The modem driver should do the work and you n t need to activate com ports
  Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key

• Get the 1097 error when trying to call a Labview DLL

  I had to write a wrapper DLL to use some functions in the DLL to a third party, and I'm having a few problems. I created an executable to test my code and it works fine, but when I try to execute the same function in the DLL that I created in Labview, I get error 1097. I read through most of the posts on this forum about this issue, but none of the proposed solutions are working for me. I'm sure this isn't a question of transfer settings to COLD LAKE because I changed the function so it only accepts a single entry (a number he obtains from a Subvi, which came from the third-party DLL, this entry is working with a bunch of other functions, so I don't think that is the question).

  I have attached the C code that creates the wrapper, but I don't know how it is useful without familiarity with the functions of the original DLL. I hope that someone can spot something basic I am out of my code, but please let me know if I need to call something else.

  I use a Labview 32 bit version 2012 on a 64-bit Windows 7 computer.

  Thanks in advance for any help!

  You should read the documentation on LoadLibrary() and understand. Essentially if you provide a full path to LoadLibrary() the DLL MUST be present at this place so that LoadLibrary() will succeed. If you pass only the name Windows DLL will ONLY search in these places:

  (1) if the module (the DLL) is already loaded it will return a handle to the loaded module and increment its reference count

  (2) if the referencing module contains a manifest (either incorporated into the image module or in a separate manifest file in the same directory as the executablemodule) specyfying a version number for this DLL will load this DLL with this version of the SxS (side by side) location and failure if it is not present

  (3) if the executable load contains a manifest (either incorporated in the executable file or in a separate manifest file in the same directory as the executable file) number specyfying a version for this DLL, it will load this DLL with this version of the location of SxS (side by side) and fail if it is not present

  (4) it will search for the DLL in the same directory as the directory where the current image of the process is loaded. It is NOT the directory of the DLL loading the DLL, BUT the directory where the EXE file from which the process was created.

  (5) in the system directory

  (6) in the Windows directory

  (7) any directory in the PATH environment variable

  (8) the path of current directory which is a location managed by windows by process and changed the two explicitedly when the application calls the API SetCurrentDirectory() but also implicitedly by things like the file selection dialog whenever it is rejected by other means than the undo operation.

  Essentially putting your dependend DLL in the same directory as the wrapper DLL does NOT work when you use the name of the DLL only UNLESS you place the two DLLs in the same directory as your executable file. If you don't want this restriction and want to be able to move these modules together in different directories, you don't have to create the correct path in your wrapper to LoadLibrary(). Basically, you must have the code to determine the location of your DLL wrapper path and then strip her own name and add the DLL name wrapped in it and then move to the LoadLibrary().

  There are several ways to determine the path of the current module. The simplest if you don't mind having the name hard-coded in your code DLL would be to ask GetModuleFileName (GetModuleHandle ("yourDLLname"), buffer, size).