Why is able to save and update the passwords for sites other than those of Blackboard FF?

Similar Questions

• should which product I buy to be able to save and send the data entered in a form?

  Hello, should what product I buy to be able to save and send the data entered in a form?

  Hi clarka14179614,

  If you are referring to record and send after filling out a form, you can either use an Adobe Reader or Acrobat application.

  Adobe Reader is a free service and you can install it here: Adobe - Adobe Acrobat Reader DC Distribution

  Let us know if you need additional assistance.

  Kind regards

  Meenakshi

• Why my computer cannot download and install the driver for the SM Bus controller? And what is?

  My computer has detected a SM Bus controller and a couple of USB controllers, but they have not installed the drivers. When I try to do, the computer does not find. What should do the SM Bus controller and why now creates so many problems?

  Hello

  What is the brand and model of the computer?

  The "SM Bus controller (System Management)" part of the system chipset. The software for it is very important for the proper functioning of the system. SM Bus is used in personal computers and servers to low speed, system management communications.

  I suggest you to download and install the latest drivers for your Windows 7 computer from the manufacturer's website.

  Good day!

• How can I update the password for GMAIL on MAIL

  Security measures, I recently updated and changed my gmail password. On my mac mail where my gmail is set to receive new messages stopped on the upper right corner, it says "failed to connect". Because the password has changed I hope, but there is no way to update your password without deleting the account and add a new internet account. If I do that then won't all my emails re download again. Help, please

• To give my e-mail address and the password for sites engine job search?

  General question: is it a bad idea to give both my email address AND my password for job search web sites like Jobing.com, Monster.com, more recently PhoenixJobs.com? Why they need my password and force me to make sure that 'cookies' are enabled?

  It makes me nervous. Should I be?

  Please notify.

  Thank you, John Van Fleet

  Job sites don't ask you your password by e-mail. They ask you a password which can be new or old. You can use the same password everywhere or have different passwords for different sites, which is recommended. You shouldn't be nervous but cause they can't really see your password.  If this post answers your question, click mark as answer .

• Update the password for the Web service fails

  Hello

  OIM 11 g R2 (11.1.2.2) does not update the user password using the web services (version 11.1) connector.

  Following Oracle instructions described in http://docs.oracle.com/cd/E22999_01/doc.111/e38352/extnd_func.htm#CIHHJCHA

  In fact, it works in a test environment.

  Caused by: org.identityconnectors.framework.common.exceptions.ConnectorException: org.identityconnectors.framework.common.exceptions.ConnectorException: java.lang.IllegalArgumentException: invalid combination of offset/length

  at org.identityconnectors.genericws.utils.EncryptionUtil.encrypt(EncryptionUtil.java:81)

  at org.identityconnectors.genericws.utils.ConversionUtil.typeCast(ConversionUtil.java:247)

  at org.identityconnectors.genericws.GenericWSConnector.update(GenericWSConnector.java:387)

  ... more than 224

  Caused by: org.identityconnectors.framework.common.exceptions.ConnectorException: java.lang.IllegalArgumentException: invalid offset/length combination

  at org.identityconnectors.genericws.utils.EncryptionUtil.deriveKey(EncryptionUtil.java:100)

  at org.identityconnectors.genericws.utils.EncryptionUtil.initializeCipher(EncryptionUtil.java:108)

  at org.identityconnectors.genericws.utils.EncryptionUtil.encrypt(EncryptionUtil.java:59)

  ... more than 226

  Caused by: java.lang.IllegalArgumentException: invalid offset/length combination

  to javax.crypto.spec.SecretKeySpec. < init > (SecretKeySpec.java:148)

  at org.identityconnectors.genericws.utils.EncryptionUtil.deriveKey(EncryptionUtil.java:98)

  ... more than 228

  Enjoy your valuable advice!

  Best regards

  JD

  Resolved:

  Problem solved in reconfiguring connector WS with files bundle good connector - apparently, jars of installation used was not the last!

• I have aspire v3 - 571 and updated the bios for him at 2.21, I wonder if I can get off at 02:04.

  I saw a video on youtube of a guy do BIOS downgrade 02:21 at 02:04 using a v3-571 (g), I wonder if I can do this procedure too! Here's the video link: https://www.youtube.com/watch?v=3QCZBy-2xaA&feature=youtu.be&list=UUN9TFke7TDA-ucprvsCNA2g thank you! Help me ;(

  I do not have this information on the compatibility of the BIOS, so I can't help you any further.

  Sorry

• Cannot insert or update the password column

  For the site that I am building, I have problems with the Member to add, change, and change password pages. I determined that the problem lies in the insert or update the password for the database column. If I remove the field of password in both add and edit pages members, they work very well (in doing so, to change the password page would go on to defeat its purpose, so have not tried it). I have Dream Weaver 8 allows to design and was wondering if there is something in the log in user and restrict access (user, password and level) it is tool that creates some how would lock the column preventing the modification of the server behaviors. Can someone help me with this you problem?

  It's probably a reserved word, try to escape the domain name with brackets
  (for example [password]), or rename it.
  HTH
  --
  Tim Carley
  www.recfusion.com
  [email protected]

• How to update the password on the other table based on the mod

  Hello
  
  I need to update the password for the other table based on the mod.
  
  I have two table 'user' and 'reset '.
  
  
  User:
  
  Username username password date_exp
  
  s232322 Bobby John sdds4545df4r 10/12/2010
  s454566 George Bill f444556gh76 07/14/2010
  s343466 Bill Clinton fgf54tyujkkkhj 06/12/2011
  .
  .
  .
  
  
  Reset:
  
  Series encrypt decrypt
  
  fgf5656fg 0 Watellemon
  1 dfggf5665 lime juice
  dfdffd545 2 applesalad
  3 54r4gggt airlines
  construction of 4 hg44hh63
  5 fgf4343yh security
  .
  .
  .
  
  How can I update the password of a table to another table "reset"?
  
  Ex: query
  
  Update user set password = (select Encrypt reset where mod (length (username), 10))
  
  
  If mod (length (username), 10) is 0, it should take series "0" encrypt the password and update the password in the table "user".
  If mod (length (username), 10) is 1, it should take serial '1' encrypt the password and update the password in the table "user".
  If mod (length (username), 10) is 2, it should take series '2' encrypt the password and update the password in the table "user".
  If mod (length (username), 10) is 3, it should take series '3' encrypt the password and update the password in the table "user".
  If mod (length (username), 10) is 4, it should take series '4' encrypt the password and update the password in the table "user".
  ....
  
  
  Please help me write an update query.
  
  
  
  
  Thank you
  Nihar

  Hi, Nihar,

  You almost had it! You just need to correlate the subquery for the main UPDATE statement, like this:

  UPDATE     user_table     u     -- USER is a built-in function; it's not a good table name
  SET     password = ( SELECT  encrypt
                 FROM    reset     -- RESET isn't a very good table name, either
                 WHERE   serial     = MOD ( LENGTH (u.username)
                                           , 10
                                 )
               );
  

• Not prompted to enter the password for the wireless connection.

  I have windows 7 and were able to access wifi trouble-free connections. However, today, I'm at a new location and when I click on the desired link I don't get no prompt to enter the password or key. I can access my computer connection currently wifes laptop so I know that the connection is working correctly. I went to control panel, network configuration and manage the connections and removed all my other connections. I rebooted and still cannot access the connection desired because I can not enter the password. I also tried to add the connection and it still doesn't work. Thanks for your help!

  Hello

  In the same exact location, your wireless computer does not work, and your wife request computer password and works OK with the password?

  The password prompt is displayed only after the computer is currently connected to the access point.

  Maybe your computer firewall blocks the ability to connect to the access point.

  Wireless in general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite L450-188 - how to disable ACPI.sys and update the BIOS?

  Hi, hoping someone can help me with a slight problem, I'll have

  I recently bought a Satellite L450-188 (number PSLY0E-03K019EN) running under Windows 7 64-bit

  I use the laptop with a DJ program called Rane Serato Scratch Live, I got latency usb problems, getting usb dropouts when I try to use the program on the smallest audio buffer position (which I expect to be able to do)

  When I contacted support at Serato team with my problem, they suggested that I run a program to check the time DPC on my laptop, when I presented the report to them, they said ACPI.sys was the origin of the problem and suggested that interest me to turn it off, but I wasn't too comfortable with that.

  The other suggestion was to try to find updates the bios for my laptop, but I'm not too set up with that sort of thing, and I'm worried I might damage the laptop maybe installing the wrong thing.

  Can someone give me advice on this topic, because I don't know what to do

  Thank you
  Jim

  Hi jimbob_1,

  Normally the ACPI means Advanced Configuration and Power Interface and control options for energy savings.
  So if something is wrong with the ACPI.sys file I recommend reinstall Windows using Toshiba recovery disc.
  By the way: are you running pre-installed Windows version or another?

  As Akuma writes that you can download the BIOS update from Toshiba Web site. http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

  Your laptop belongs to the series of PSLY0E, so you can download latest BIOS.

  Before you begin the BIOS update, close all running programs and extract all the files from zip archive. You start the update as an administrator and connect the AC adapter. Also, make sure that the battery is fully charged.

• Save and read the value of control using xml

  I need to read and update the controls with the values they have the previous time the vi has been run. Joined a vi that I come up with. I can record control values; When I apply the section which should read and update control values, I get this error "the XML tag describing the type of data does not match the wired type". Do we know why? Attachment: test vi and xml control file.

  As far I can tell it seems that you have found a bug. The XML Unflatten handles not properly cluster in a chain, and a variant of something. The Get All method returns an array of clusters, with each group being a string and a Variant.

  If you follow these steps:

  

  no error is generated.

  But, if you do this:

  

  you get an error.

  Looks like a bug to me.

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Why when using Microsoft Works and type the letters my cursor suddenly disappears and I type at the end or middle of another sentence?

  I was typing a letter when suddenly I hit in the middle of another paragraph (just did as I was typing this question!), why and when is it fixed? I asked the same question before and said "we are working on that." Well, FIX it!

  Hi anneemerson,

  1 are you facing this issue only when you use Microsoft works or with other applications too?

  2. you are using a laptop or a desktop computer?

  3. you are using a wired mouse / without wire/USB/PS2?

  4. have you tried to update the drivers for the mouse?

  You can try to reduce speed and other options for the mouse pointer or the keyboard.

  For more information about changing the mouse pointer settings, please visit the below given link:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  If the problem only occurs with works, you must validate your request in the forum Office for assistance:

  http://answers.Microsoft.com/en-us/Office

  Hope this information is useful.

• Why my speakers are crackling and distort the sound?

  Why my speakers are crackling and distort the sound?

  Hello

  You have a few options as I see it.

  Click Start in the search type Recovery Manager, and then click it once select Yes on user access control, and then select I need immediate help and then select driver & select recovery requires the audio driver and install it and then restart the device.

  Go into Device Manager and uninstall the sound driver and restart and unit automatically installs the driver.

  Try to run the system restore to the date where the unit was working fine.

  Try to update the driver from hp.com for Audio & Bios site.

  Last step is to perform a recovery on the unit before they please back up your data.

  If your laptop is still under warranty, contact HP and make arrangements for the speaker replaced.