Why is my menu clip off and does not not to premier pro

the clip menu appears inactive how can I turn it back on? index everything, cause I wish you know how?premier.png

Select a clip. I see that a clip is selected in the project Panel, but this Panel does not have focus, and no cutting is selected in the timeline panel, which has the focus.

Tags: Premiere

Similar Questions

  • WHY IS THAT FIREFOX ALWAYS GEL AND DOES NOT?

    When I started using firefox on facebook it works well for a bit, and then it starts does not or not is very slow. I never had problems with firefox until these latest updates. What could be the problem. It is very frustrating and I've always liked this help so far.

    I deleted the program and reloaded it and have the same

    WHY IS THAT FIREFOX ALWAYS GEL AND DOES NOT?

    I deleted the program and reloaded it and have the same

  • Laptop frequently is off and does not restart even when the Start button / stop is held in

    I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

    A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

    Is there a known hardware problem which can cause this?

    Thank you

    Adam

    Hi Sean,.

    Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

    After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

    Kind regards

    Adam

  • Satellite C650D - Activate Wi - Fi is turned off and does not turn on

    Computer laptop Satellite C650D 006011 will not Wi - Fi switch on, even by Conectivity doctor or Instructions from Toshiba. F8 key does not appear on the monitor when the FN key pressed to activate a Wi - Fi connection.

    Laptop is about 12 months, a Wi - Fi connection worked initially. Have reinstalled the Wi - Fi drivers in an attempt to activate the e-mail... always to turn on Wi - Fi to connect.

    If the WLAN card is listed correctly in the Device Manager you should not reinstall WLAN driver. Driver WLAN has nothing to do with ON / OFF feature.

    > F8 key will not show on the screen when you press FN key
    Your problem is not WLAN driver and the functionality of the FN.
    Add the value of Toshiba install package.

    I can't get it for you because the description of the model 006011 C650D is unknown to me. Please recheck the model name and model number. You can find it on the bottom of your laptop placed on the sticker of Toshiba.

  • DVD Drive Power Off and does not restart

    DVD Multi hunt in my ThinkPad W530 assignments after a while to save battery. But when I go into my computer, make a straight on the drive and click to turn on, nothing happens. The Player opens and allows me to put the disc in it, but no program on my computer does not detect the drive. Not Windows Explorer, not any program, not Windows Media Player to DVD burning. When I disconnect, then reconnect, the drive simply disappears from the hard disk.

    So far, the only way that I was able to get the DVD drive working again is by restarting the computer.

    What can I do?

    ThinkPad W530

    NVIDIA Quadro K1000M

    64-bit Windows 8

    Actually the above did not work. I uninstalled Cyberlink PowerDVD and DVD player started working as it was supposed to.

  • Audio default HDMI output goes to "not connected" when the receiver is turned off and does not reset as defdault when the receiver is turned on

    I have an NVIDIA HDMI output connected to audio receiver 7.1 Onkyo TX - NR. 818.  It is defined as the default output.  When connected, it works well.  When I turn off the receiver, the output goes to "not connected" and scene of my returns instantly becomes the default.  When the monitor is switched on again, the HDMI out remains "not connected" and audio is directed to the monitor.  If I unplug the pc HDMI cable and reconnect it, the HDMI from the receiver instantly responsive as default device.  How can I stop her from doing this change, whenever I have turn off the receiver?

    Hello

    Try this: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Nvidia-HDMI-Output-quot-Not-plugged-in-quot-Audio-not-going/m-p/1001191#M16981

    Good luck.

  • In the previous version of Firefox, I could close the window and still have my tabs intact when I reopened it. Why 4 FF closes all tabs and does not give me an option to save? (And if so, where can I change the parameter?)

    In the previous version of Firefox, before closing a window with tabs open, he asked if I would "save and close", "close all tabs" or "Cancel". FF4 comes to warn me that I am fill these tabs and wonder is I want to continue, without giving the option to save my search for later use.

    See if this post will help you

    https://support.Mozilla.com/en-us/questions/801145

    GW

  • Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

    Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

    To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

    That's what * I * would call cleaning and optimization of a Windows XP machine:

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

    HP printer all-in-one B210a win 7 64 bit.

    no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

    First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

  • I've installed Illustrator dnuee and uninstalled and reinstalled, it bounces just off the dock and does not open (should I uninstall CS5) thank you

    I've installed Illustrator dnuee and uninstalled and reinstalled, it bounces just off the dock and does not open (should I uninstall CS5) thank you

    Hello Leana,

    Can you please try to open Illustrator after creating a new user account on your computer?

    It could be a permissions problem, I just want to check that first.

    Thank you best regards &,.

    Rambour

  • Why hide my taskbar and does not come backwhenever I open firefox and other files?

    Whenever I open firefox, the taskbar is hidden and does not come even if I place my cursor there. This happens to all my files as well. What is the solution for this?

    I called the big players to help you. Good luck.

    You have Firefox in full window mode?

  • DELL Inspiron N5110 does not stop and does not wake from sleep

    Hello.

    I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

    The laptop computer may not wake after sleep or either Hibernate.

    I tried all the solutions that advised you to all the other people in the forum who have the same problem.

    1. the laptop cannot stop mode safe either.

    2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

    3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

    4. I tried to install the latest NVIDIA video drivers. This did not help either.

    5 running only on battery change nothing - not cannot always stop.

    6 race only on AC adapter without battery - still cannot stop.

    7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

    ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

    8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

    9. I loaded the BIOS default settings (F9) - stop still can't.

    NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

    10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

    11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

    In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

    The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

    It is a new laptop.

    Please advice how to proceed. If you know which component fails please tell me.

    Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

  • my dvd is battery and does not open after that I tried to install a program.

    Hello

    I started to install a program on my laptop.

    The installation did not pass. And the cd is stack on the disc and does not open.

    On my computer, it does not see the drive that reports to the Conference on disarmament.

    shows that C; and f:

    Hello Arturomaduro,

    By "stack" I assume you mean that the CD/DVD is 'stuck' in the player and you cannot get the drive to open it? The most important thing right now is to get the DVD from the drive. You have two options.

    1 / restart your PC and press the eject button on the CD/DVD drive to see if the drive open and release the CD/DVD. Normally, this should do the trick.

    2 / if my first option does not release the disc caddy, you will need a large paperclip and bend straight. Take a look at the front of your DVD drive and you should see a small hole. This is usually placed near the eject button. Make sure that your PC is off and you have removed the plug from the socket. Now insert the straigtened paper clip into the hole and the 'push' the draw caddy should now begin to open (or open completely). If it opens only paritally, then gently pull the draw caddy until it opens completely and then remove the CD/DVD. After removing the CD/DVD push the caddy draw lots to close. Be sure to gently push to clear the draw caddy.

    Maybe it's just a unique and the player will operate normally afterwards. If she keeps refusing to eject a CD/DVD, there may be something wrong with the CD/DVD unit itself.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • iPhone 7 more - Siri iOS10 not work and does not

    I received my iPhone 7 Plus 3 days ago and tried to set up "Hey Siri". In the process, I noticed that Siri was insensitive and does not work.

    I did some troubleshooting and started with the reset, restore, turned dictation & Siri/off voltage (before and after reboot) and still no response from Siri.

    I proceeded to remove the hardware problem by making a call and speaking directly into the microphone with high and low height during a call. Nobody who assists heard both high and low perfectly. I only tested the microphone with voice memo and the microphone worked fine.

    Called customer service on speaker (which call was working properly) but they were unable to provide a response, rep said she would follow with me Wednesday.

    I press the home button, Siri will appear with the wavelength and as soon as I said a word Siri States "I didn't understand" and rest wavelength normal. I don't know if there is a problem with my phone or iOS10, but if someone has an answer or has the same issue please chime. Thank you!

    iOS 10, when using Siri, you hold DOWN the home button while talking with Siri.  Release the button when you are finished speaking.

    Best,

    GDG

  • Last update of Safari is more you show your cookies and does not seem to allow you to remove them. Is this a decision of Apple?

    Last Safari doesn't show cookies and does not seem to allow their removal. Why?

    Data of Safari/Preferences/Privacy / website management.

Maybe you are looking for

  • NI-VISA run-time engine

    When 'building' a LabVIEW program containing NI-VISA under VI (for example to connect with USB), I had problems to get the code 'built' to find my devices NOR VISA, even if the NI VISA's USB drivers are correctly installed on the computer 'target'. (

  • Lens for EOS Rebel T1i kit ND filter

    I think of buying a lens filter neutral density for my kit EFS purchased in December 2010. I think I need a 58mm lens, but there are many sizes for my camera.  Should what size I buy?

  • Is it possible to go beyond the login page to access the homepage in Money 2005? I am locked out of all our data only.

    3 months ago I had to restore my computer to Virgin.  Shortly after, I changed my hotmail password, twice.  When it came time to add data to my money program, the registration page has popped up, by habit.  Normally the password is filled and I click

  • Vista error "the product key you entered is already in use"?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought Windows Vista Home Premium two years ago and now an activation window appears with a message "the product key you entered is already in

  • JSR 172 - newbie help

    Hello I've been playing with trying to get my application to connect to a Web using JSR 172 service. I'm currently testing the application using free web services of "h t t p ://www.webserviceshare.com/". "» After generating the heel and adding the f