Why is my screen black and blue instead of black Uni Vista?

Similar Questions

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• stop screen pixellisant and blue problems

  Get a pixelated screen on startup or after using for a while also the blue screen appears and computer stop reboots the donkey

  Hello

  This screen is normally a sign of a corrupted graphics driver or graphics hardware fault

  install the graphics drivers of your computer or graphics card manufacturer and see if that fixes it

  Otherwise, I would look on the graphics hardware as a potential problem

• Does anyone know why my computer screen has a blue tint to it?

  I tried the Auto adjust option on the screen itself, but the screen is still blue. Now it has changed to orange! Help!

  Hello

  You can try to reset the default color settings in your graphics chip\card.

• Screen black, but still clocked

  Hello, I have a problem. I'm using Windows 7 home edition. and that's the problem. This happens for 2 weeks, I was chatting with my friend, all of a sudden my screen went black, but my CPU still running. then I restart my computer, after the turn of the cpu on a couple of minutes later (5-15 minutes) the screen went black again. my anti virus do not show any threat, and after the black screen, I can't press CTR + ALT + DEL to Task Manager to get out. but then the still CPU running. Please help me

  Hello

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.

  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require good Windows 7 drives (especially if you can not start safe mode).

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Windows 7 boot disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• To monitor screen black startup even when turned on.

  Hello, John Sherman,.

  Your question about the Microsoft community received a response from stephanie Podder.

  Title: to the start screen black screen even when turned on.
  Response

  Hi John,.

  It has long been that you have filed your application. Are you still experiencing this problem?

  If so, let us know we will be happy to help you!

  For stephanie Podder: yes I always face this problem. I need help.

  Read this answer on Microsoft Community

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of driver settings or registry corrupt display.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Screen resolution and colors - how to set 16 bit

  original title: screen resolution and colors

  I have Windows Vista Home Basic package, but when I change my screen resolution, color change, it says 8 bit - low, but size of the screen (640 x 480 pixels) resolution is big for me, I need 1024 x 678 pixels and 256 colors not, I need 16-bit. Help please, because I really want to keep Windows Vista Home Basic Edition

  Normally, it's because you need to install the correct drivers for your graphics (Vista). Go to the site of the manufacturer of your PC in the first place, or if the manufacturer of the graphics card to download and then install them.

• Why is my screen turning black temporarily, then the screen saver turning blue, when using hotmail?

  Sometimes when you use Hotmail - specifically, put the cursor in the e-mail box - Mac color wheel starts to turn. It is quickly followed by the entire screen goes black for a few moments. This is followed by the screen back, but the background changing default screen saver is blue that usually appears temporarily when I boot. This happens not all the time, but it happens. I visited the 'genius bar' Apple Store and they checked on my machine. They cleaned up some disk problems, and it is always the case. Their thought is that it is a Firefox problem, because they did not experience to date, and it didn't happen when I use hotmail with Google Chrome.

  Tryto clear the Cookies and Cache and check again, history > clear recent history > select time range to clear all > Details select Cookies and Cache > clear now.

  Thank you

• Prints blue instead of black

  I have a HP Photosmart B210, more.  My black text (and pictures) print light blue instead of black.  I replaced the cartridge twice and I always feel the same question.  I cleaned the print heads several times.

  just to repeat the solution.  Choose Printer Preferences and fast/economical printing.  Also in the grayscale option choose black ink only.

• Satellite M70-340: screen went completely blue or black

  Hello world
  I just bougth a portable Satellite M70-340 and twice tonight screen entered a single color (black once, once blue) and although I could still hear the windows work (I could hear the Windows alert sounds and alerts by MSN mail), the screen went completely blue or black. I assume that the error is caused by a problem of display driver, so I downloaded the latest driver present Intel on this site. I don't know if it will work.

  My question is, did this happen to someone of you? How did you solve this problem? And even though I have an Intel Graphics Media Accelerator Driver for Mobile, I could install the ATI driver on this site? (I prefer ATI driver since it is out of date.)

  Thank you all for your interest,
  Best regards.

  I guess you have mobile Intel graphics card. In this case, you can only use the graphic driver intel from the Toshiba page or are also website of intel.

  But you cannot use the ATI graphics driver! You laptop has ATI No. graphics card!

  However, you suggested that it is a new laptop. I would recommend to contact Toshiba service partner in your country. The guarantee is valid and you should take it!

• printer is, BUT only with black and blue, all other diagnoses print with all colors

  Initially, the installation of the printer REFUSED to align, took 7 attempts (OK, I've heard of Einstein quote!). Whenever I used the printer to ALIGNER PRINTER screen - the process has failed. So I looked on the web, and:

  Clean the cartridges,

  Erased the vents

  Removed and cleaned the print head

  Prayed

  Tried again

  To nothing not done, so I tried to make the diagnosis via PC software and here deepened the mystery.

  When the HP Photosmart B210 series Toolbox running I got three different results between the three print options

  A Diagnostics Page of print quality gave me five Ba's maximum color printing

  Align the print heads gave me the black and blue boxes/lies/grids and the message alignment successful

  The print Diagnostic information gave me all four colors with a lot of useful info, including the print head 73 calibration trust level: 0

  Ideas anyone, before I bin it and buy a Kodak or disgusted Epson

  What exactly is the problem?  Alignment aligns the print head color to the black print head, and black and one color (cyan for your printer) are required for this.  (There is probably an extra set of blocks that prints gray blocks fade to white.  This section is used to calibrate the energy for the colors).  The other test pages that you printed will be print various diagnoses or test pages that will use all colors.

  A successful alignment page requires the page be printed on white paper not used and requires that the cyan and black sections print correctly.

• A black screen, then a blue screen

  The status bar for my CD drive was off the track so I removed the side panel to look at. He was COVERED in dust. So I took a cloth and sprinkled the entire interior. The fan was BAD and got everything clean. I unplugged the two cords that were clinging to the back of the CD player to try to fix the tray. Well, the plateau is back on track and works very well!  However, now a black screen appears and says CPU fan has failed and stops within 5 seconds, it seems, but the fan works well. And then, sometimes after you turn it on, I get a blue screen that says computer has failed. I break something? I connected the cables to the back of the CD player and there are only 2 points, in that they can go. Any suggustions? Don't know what I did or what I need to do? HELP Please!

  The CPU fan is a different fan for the computer case fan.

  You did of course something back there.

  http://en.Wikipedia.org/wiki/Computer_fan

  CPU fan

  Used to cool the radiator of CPU (central processing unit). Effective cooling of heat concentrated as an large-scale integrated circuits requires a heat sink, which may be cooled by a fan. use of a single fan will not prevent an overheating of the small chip.

  The repair shop will be able to help you.

  See you soon.

• screen of Aqua and blue font. Cannot read.

  The help screens, the screens of Bank and others appear with a background clear aqua and blue font. Some emails, too. Why? I right click and drag to read the characters.

  Hi JoValatka,
   
  -Do you remember recent changes to your computer (like changing the theme or wallpaper etc.) after which this issue began to occur?
   
  -Have you downloaded any third party themes, wallpapers etc?
   
  Check if the Aero feature has been turned on. For more information, see the article below:
  Solve problems with Windows Aero

• Printer prints blue instead of black

  I have a HP 6840, has worked well and suddenly started printing blue instead of black.  Prints all other colors, but not black.  On the test page, everything is blue, except two small squares at the top that are dark gray.

  Any thoughts?

  The test page actually uses a combination of color to print what appears as black text.  It seems that you will need a black cartridge.

  It is not uncommon for the third-party products to have poor quality, see the study here for more details.

• Black screen with a blue glow on screen 55 "

  I'm having a problem with the 55 '' LCD Cisco monitors where they randomly have a black screen with a blue glow at the bottom (hanging vertically).  Their power off, then bring him back the photo.  The DMP continues to play their content, and they are not connected by RS232, so I don't know that it is not orders this way.  We have two side by side, and it is never both at the same time.  It is one or the other, and they seem to alternate.  Last week from the other two, who are in another building and in separate rooms in one room on the other hand, started having this problem also, but they have been in service for a few months more.  Last week, it was one, which is just in front of the person to me, and this morning it was the other.  The oldest of them is just less than a year in the service.

  Any suggestions?

  Hi Michael,

  I know a couple of back issues of customer with 55 '' screens goes black after a while. Best option is that you open a service request in the TAC of revision of the exact firmware running on LCD screens and see if they match a known problem that can be corrected - since I do not believe that there is a patch available in general release.

  Best regards

  Marco