Similar Questions

• Why do I receive flag showing that I have a problem and insert the disc. but nothing shows

  Why do I get a red flaag showing I have a problem and to insert the blank disc aa, what I do, but the flag persists?

  Hello

  • What disk you insert?
  • What are the instructions?
  • How long have you been faced with the question?
  • Are there changes to the computer?
  • The problem is present in Safe Mode and clean the boot?
   
  I suggest you run the Analysis System File Checker and see if TI the problem still occurs. To do this, please see the following article.
  http://support.Microsoft.com/kb/929833

• Pavilion 15-p253nh: why what my screen to do that when I watch videos and movies?

  Hello!

  So I feel some kind of problem with my screen when you watch movies and videos. Surprisingly, it happens not always but often enough.

  Here is a link with a picture of her becaue I can't really explain what is happening. Sometimes, it isn't that the Green rather just colorful. Sometimes, it affects the whole screen or just parts of it.

  All the drivers are up to date.

  It's a little different, but I thought it would be relevant:

  When I click on the arrow pointing downwards in my browser which lists the sites, I visited most or recently, it is empty and remains empty until I put the cursor over them.

  Thanks in advance!

  Hi @Coli777,

  I hope that it resolved the problem for you as it has for other people.  Here is a link to an article that includes a section on the phenomenon.

  5 ways to solve the problem of green screen YouTube (from iSkySoft.com).

  Good luck!

• Why my incompatible air policies on IPhone but not on laptop and desktop computers and iPads.

  Hello. I hope someone can help me. I'm a newbie to html, so I use Dreamweaver as a Publisher. I was responsible for developing an e-mail merge for a customer. Everything was going well until I noticed inconsistencies on my iPhone and Android phone device. Here is the link. APTAC WEEKLY NEWSLETTER

  If you look at it on an iPhone the fonts of the upper floor are smaller than the stories below him. I would like to make it all appear the same size. I've played around with the HTML without result. Can someone take a look and let me know if they see an obvious correction to this problem?

  If you have the answer, please be very basic to explain what should be the corrected code and where it must go as HTML again I feel a bit confused when I work in it.

  Thanks in advance for any help you can provide. Have a nice day/evening.

  IOS devices tend to zoom text to what they see as a more readable size.

  You can stop it by adding this to your css...

  {body

  -webkit-text-size-adjust: 100%;
  }

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• I must have hit something and changed how my screen looks like when I open a tab page is real real long or it can be so short, I don't see anything

  original title: screen problems

  I must have hit something and changed the look of my screen
  When I open a tab page is real real long or it can be so short that I can't
  See anything someone can you please tell me how to get my screen to the
  how he was going crazy in New York!

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• Loading/have handled a problem of speed of characters complete reversal?

  I have a complete reversal of character (left profile, quarter left, front, rear, right quarter, right profile) for the head and body.
  They are each in 3 k by k 3 @ 300 dpi, I brought from Photoshop, I want to keep for close-ups.
  Loading takes forever. As to adding even a stick to a part of the body. And why do I see the mesh for all other angles when I want to work only in one (even when I turn off the eye)?

  My computer is pretty decent.

  Any ideas on how to speed without having to drop the resolution or to load each corner like a separate puppet (I really wanted to keep in a puppet for towers simple head/body)?

  I have download the character if this will gladly help!

  Thanks for all the help guys!

  Large puppet!

  Since you have a shortcut assigned to all points of view, when the puppet is first imported, it disappears completely (as a shortcut makes the layer disappear until you press the shortcut). I guess you're applying head Turner so that controls your angle head who discovers shows, that solves the problem disappears.

  Your blink layers are named as follows: 'right Blink (!). But should be probably "Blink right (b)!" or just "right Blink -" the "!" changes the keyboard trigger to hide the siblings, so is not make sense without a trigger letter or a digit.

  > They are each in 3 k by k 3 @ 300 dpi, I brought from Photoshop, I want to keep for close-ups.

  Your PSD 2586 4139 x, which is high but not unreasonable. To reduce the memory load, I used the PS of good crop tool to settle down a little more, especially to ensure that no pixel was being kept outside the bounds of the document (option of the tool 'Delete Pixels cropped' to harvest). I had to make sure that all the layers were lit in PS to make sure I wasn't amputated of something important.

  > Loading takes forever. As to adding even a stick to a part of the body. And why do I see the mesh for all other angles when I want to work only in one (even when I turn off the eye)?

  Each layer adds to the mesh of its parent company of the Group (even when the eyeball is extinguished, since later it can be turned on during the animation), UNLESS you have enabled deform independently. This is done either by selecting the layer in the Panel of puppets and by checking the option in the Panel properties, or by adding a "+" in front of the name in PS / HAVE. You have already done this for all the views of the leading group, but not for the views in the body group. In addition to the checbox, this is indicated in a subtle way: the puppets in puppet icons display briefly on the left side of the Panel show puppets as white for Warp-regardless of the groups and dimmed for non-Warp-regardless of the groups.

  > My computer is pretty decent. Any ideas on how to speed without having to drop the resolution or to load each corner like a separate puppet (I really wanted to keep in a puppet for towers simple head/body)?

  Can you give more details on the platform, OS, CPU and memory speed?

  One way to accelerate the timeline panel puppets is double-click the group that you are working on. Which opens just this group as a separate puppet in the puppet Panel (you can switch between the different puppets in the Panel using the drop-down menu in the tab of the Panel at the top).

  We are also working on the optimization of the application in different ways, so it should get better. Thanks for the comments!

• Why my phone screen randomly with lights to touch me.

  Why my phone screen randomly turns without touching myself.

  It might be background notifications (this happens with email on the iPhone of my mother). You can configure notifications by going to settings-> notifications. In addition, if you have an iPhone 6s, 6s, SE, iPhone 7, 7 more, they "raise to wake you up" that allows the user to raise to reactivate the user's iphone. I hope this helps!

• Why does my screen half way down when I press the home screen time 2 or 3?

  I can't see any advantage as to why my home screen comes down to halfway, exposing a black screen when I press the home button.  What is this for?

  This is a feature called accessibility.

  Accessibility

  Accessibility helps you more easily interact with elements at the top of the screen on the iPhone 6, iPhone iPhone 6s and 6 s 6 Plus more.

  Bring items at hand. Go to settings > general > accessibility, turn on accessibility, then slightly double - tap the Home button to align the top of the screen on the scope.

  See here: https://help.apple.com/iphone/9/#/iph66e10a71cand http://www.imore.com/how-use-iphone-6-and-6-plus-one-handed-reachability

  -AJ

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• Why the Info screen called my back camera air ipad 2

  Why the Info screen name my back camera air ipad 2?

  You have two cameras - the front and rear camera - this information window that you have pursued photography

  LN

• Why Flash my screen when I discover the ITUNES Store?

  Why my PC screen flashing continuously when connected to the web page of ITUNES Store?  This started after updating to the latest version of ITUNES.

  I have the same problem after I updated to the latest version. The support team is useless. They are just make me todiscussion groups to help solve the problem. It drives me crazy. It is not obvious to them that their update is twisted? And why not have an answer for me? They just said technical issues and not offered any freaking help! GRRR

• Why what I get a blue screen on my laptop, and then it restarts

  Remember - this is a public forum so never post private

  Ideas:

  • Why I get a blue screen on my laptop and then rebootingPrograms with the fact that you have problems
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  § What is the exact error message that you encounter the blue screen?

  § East - this happen randomly or whenever you access any program on the system?

  § Remember to make changes to the system?

  § Since when are you facing this issue?

  Give details, so that we can help you in a better way.

  I suggest you disable automatically restart the system and check the exact error you encounter in the blue screen and let us know. Follow the steps mentioned below to disable the auto reboot.

  a. right click on my computer and then click Properties.

  b. click on the Advanced tab.

  c. under Startup and recovery, click settings to open the startup and recovery dialog box.

  d. clear the checkbox automatically, restart and then click OK, the number of times required.

  e. restart your computer so that the settings take effect.

  Method 1:

  Step 1:

  In safe mode, check if the problem persists. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  If the problem persists then in safe mode, I suggest you to do a clean boot. Follow step 2.

  Step 2:

  Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 2:

  I suggest update you the drivers on the system for the graphics card, etc. on the sound card system and check if the problem is resolved. I suggest update you also the drivers from the chipset on the system and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my logon screen icon double for each user account? What should I do?

  Please help me with my problem

  Why my logon screen icon double for each user account?

  What should I do?

  Hello

  Most likely, this is caused by a 3rd party "software logon." For example, Omnipass is known to cause these 'issues '.

  Please take a look here:

  http://social.msdn.Microsoft.com/forums/en-us/WindowsSecurity/thread/22d7fc0a-595c-4b7c-B195-a19e73e06db3/

  I hope this helps.

  Best regards

  Mieke

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.