Why is one of my 4 5893 Modules doesn't work does not correctly?

Hello

This is the configuration of my HW and SW:

LabView 2013 SP1

1 x cRIO 9076

4 x NI 9853 CAN Modules

CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

Thanks for your help

I solved the problem, it was an error of configuration on my side.

The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

Tags: NI Software

Similar Questions

  • Why is to speak the text doesn't work does not correctly?

    I get a circle turning for a while and no results. He used to work. I have the latest OS 9.2.1. I can see the memory. I have hard reset (home + power on button). I have reset the settings. Nothing helps.

    Hi, PBoesmans.

    Please visit Apple support communities.

    I understand that the option to dictate does not work with Messages on your iPhone 5.  Because force applications to close no has not solved the problem, please go through the troubleshooting steps below.

    Help with Siri

    • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
    • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
    • If Siri is not available or responding to questions, see the next section.

    If Siri is not available, or do not understand or answer questions

    After each step, see if you still need help:

    1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
    2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
    3. Restart your iPad, iPhone or iPod touch.
    4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
    5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
    6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
    7. Contact Apple support.

    Use Siri on your iPhone, iPad or iPod touch

    See you soon

  • Just one of the many windows of JS popup doesn't work does not correctly.

    Only the link above in the right column of links on this page for 10 year, fails to display the target URL

    www.ossiningdesignguild.com/

    Target site is up and working very well here:

    http://www.print-Cabinet.com/

    Past blind and can't find a problem with the link of coding. Any help is greatly appreciated

    The actual URL, as you mentioned is:
    http://www.print-Cabinet.com/

    NOT
    http://www.printcabinet.com/

    If you just need to change:

    javascript:void(0);" onclick="popUpCenteredWindow('http://www.printcabinet.com')">

    TO:

    javascript:void(0);" onclick="popUpCenteredWindow('http://www.print-cabinet.com')">

  • Why are my palps buttons doesn't work does not correctly after working fine for weeks?

    I have not touched the site until I heard that there is a problem today. The drop down menus are not displayed to the top.


    https://www.appne.NET/events.html

    Sometimes if I hit refresh or publish the site again, they show once again. then, after testing to see if they work, they disappear again.

    I installed at the exit on April 2 to see if it is useful, and it did not.

    I talked to paypal and tested the buttons on their test Web site and they worked very well.

    I do not use the widget in Muse to create... I copy and paste the creator code for button paypal.com.

    Anyone else having the same problem?

    Please help if so. Thank you!

    Mary

    In this case, users click on paypal and cancel, then repeat the same process in the same browser. This can be the reason for the drop down or paypal button problem as browser stores the information each time. If its best to erase browser cookies and then check.

    I would like to know if you want to test me with a specific browser or device.

    Thank you

    Sanjit

  • Why does not work does not correctly?, work the first day and after 48 H does not work.

    Why the APPLE TV to stop working 48 hours after installation

    You will need to provide more information

  • Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

    Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

    I'll try not to waffle too guys, so here's...

    Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

    But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

    After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

    A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
    The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
    Tried a system restore
    Tried to reinstall itunes

    When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

    Thank you comrades, cordially, Freddy frustrated. :)

    Another said I should go to Device Manager, uninstall all the USBs and restart.

    Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

    I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

    Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

    I guess that you don't see the error messages in Device Manager or you must declare them.

    You can uninstall all USB devices that do not exist as follows:

    • Open a command prompt window (start > run > cmd > OK)
    • Enter the following command and press enter

    Set devmgr_show_nonpresent_devices = 1

    • Start the Device Manager by typing the following in the same command prompt window

    devmgmt.msc

    • In Device Manager, click the view menu and select "Show hidden devices".
    • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
    • Reboot (with the iPhone NOT connected).
  • I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

    I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

    Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

    Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

  • j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

    j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

    Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

    http://answers.Microsoft.com/fr-FR

  • First module (bibliothek in German) does not work, no possible synchronization.

    First module (bibliothek in German) does not work, no possible synchronization. Does anyone know this problem? All solutions? Elmar Greeez

    Hi elmarb,

    Could you please explain more about the subject. You are not able to sync from the Office of Lightroom for Lightroom Mobile.

    Or

    You not be able to synchronize the development set on several images.

    Kind regards

    ~ Mohit

  • 26.0 Firefox works do not correctly with Mac OSX 10.9.1. Text jumps from one side to the other spontaneously

    I used firefox on Mac computers for years. I am now under Maverick Mac OSX 10.9.1 and have major problems with sizing of text in windows and windows suddenly change size (much smaller) and jump on the left side of my desk. Apple does not support Firefox, so I can't get assistance on their part and Mozilla is impossible to contact them directly. Can someone please help with this problem?

    You can check the problems caused by a corrupt localstore.rdf file.

    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

    Hello

    I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

    And it comes to envy, I bought, Kingston.

    The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

    Don't know how better to explain this.

    If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

    Can anyone help please, it's just the motherboard it is too old or something?

    Thank you.

    See you soon.

    JO

    Hello

    Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

  • sort order doesn't work is not in the library module

    Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

    Thank you

    Triple - make sure that the camera clocks have been set at the same period.

    The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

    Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

    If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.

  • The module "Adobe layer Namer" does not appear in the extensions.

    Hi all.

    I use PS cc 2015.

    Well the module "Adobe layer Namer" appear to have correctly installed and appears on my Adobe add-on page, it does not appear under window > Extensions.

    Please notify.

    Thank you

    Dario.

    Did you try to remove and reinstall add on?

    Please disconnect from creative cloud app and then reconnect.

    Concerning

    Jitendra

  • The BC for Dreamweaver CC 20141 module doesn't work no-JS errors?

    I've upgraded Dreamweaver yesterday to the new version of CC 20141, and it seems that it is not compatible with the Add on BC (which I've deleted and reinstalled). It it gives an error "BCModulePanel" js on resize not defined: the Panel of the charges but do not connect to BC, so some modules can be inserted.

    Anyone else having the same problem... on Mac? It has been tested?

    Hi Ionut

    Thanks for the reply. With your steps and the steps of another thread (Re: Business Catalyst extension works do not since the upgrade) I now work (I think that delete the files from the library made the difference).

    However, I guess the add-on of the BC has not been updated to work with the new rendering engine yet, because it does not produce the new (or old) module named parameters... I hope that BC will solve this soon if we can start developing sites with DW.

    See you soon

    Paul

  • Why is Photoshop elements 12 'Download now' button mentioned, but which does not exist?

    Follow the instructions to access the page of the trial, but as the subject says, 'Download now' button disappeared without a trace.

    I have to try before buy you

    Hello

    Does not this one work for you?

    http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=en

    If this isn't the case, you may need to try a different browser.

    Brian

Maybe you are looking for

  • Links do not work

    Recently, I upgraded to 31.0 Thunderbird and I received the following question. I tried to read some ballots and I decided to click on one of the links taking me to the post office (the balls). That's what I get: http://imgur.com/PrA34rw This problem

  • Satellite L735-11f autonomy last only 3 hours

    my daughter satellite L735-11f autonomy last only 3 hours...is it a problem or do I need to replace the battery, or simply change a few settings?

  • Formatting of system memory

    Hello. I recently got a Compaq Presario SR5333WM of another desktop PC, and I want to restore the computer to factory settings. In other words, format the memory. Does anyone know how easily on this computer model? (If it's important it's a Windows V

  • sp61783 corrupt?

    Trying to d/l the file and at the end is a 123 MB file (485 MB): http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&... Download directly from ftp (s) and same thing. FTP://ftp.HP.com/pub/SoftPaq/sp615

  • Cannot change the resolution on the coming Pro 11 webcam settings?

    Is it possible to change the resolution settings of the built-in Tablet coming 11 Pro webcam? We need to reduce the size of photos that are taken, and there is no way that I can find in the system to do this. We have several tablets of 10 of Latitude