Why is only one account?

Similar Questions

• I'm locked out guest user (only one account on my Mac)

  I recently bought a macbook model 2013 end pro on eBay and the seller gave me the password for the user "guest".

  I changed the password to a blank password that I didn't have a password but I did not create a new user account.

  last night I installed clean OS X El Capitan, when installation is complete asked me a password at the login screen.

  I managed to pass the login password, but now I am trying to create a new password in system preferences, but I can't because I'm required to use a password to allow the change.

  Guest user is the only account on my Mac, so I have no idea what to do to get out of this mess.

  Thanks in advance to anyone who can offer support.

  You wipe the drive and then do a fresh install of Mac OS X. You can do this via the network of restoration:

  Installer Lion through Mavericks

  1. Restart the computer and after the chime hold down the keys COMMAND + OPTION + R until it appears a globe. Wait patiently - 5 - 15 minutes - until appears the Utility Menu.
  2. Select in the Menu Utility disk utility and click on the continue button.
  3. Disk utility charges and select the player (usually, it's the entry Out-bumpy with of the mfgr.) ID and size) of the list to one side. Click the Partition tab in the main window of disk utility.
  4. Under the scheme of Volume defined heading the number of partitions in a single volume. Click the Options button, set the GUID partition scheme, and then click the OK button. Define the type of Format Mac OS extended (journaled). Click the Partition button and wait until the end of the process. Quit disk utility and re-enter the Utility Menu.
  5. Select reinstall OS X in the Utility Menu, and then click the install button.

  This should install it the original version of OS X comes with the computer originally.

• Only one account on the computer is not a Director

  I've seen a few posts on this problem, but none touch on questions or offer a viable solution.

  Here goes:

  The computer has a microsoft account (configured with an e-mail address and password), which we will call "Tom" on this point. This AT ONE TIME WAS a Director of accounts with total control. He is now appearing as a guest. Currently, there is no administrator account available in order to make changes, make the high command prompts, etc. When a user account control box, it is said to connect to an administrator account, but does not list a, and the OK button is grayed out.

  Sounds easy? FAKE... Here are the parts of fools.

  I am UNABLE to activate the built in admin account through this account of Tom for obvious reasons not having admin rights for the guests UAC or elevated command prompt. Register States that he built in account is already on ('10' in hexadecimal code)

  Restart in safe mode to get the account admin ACCOUNT TOM CAUSES to DISAPPEAR PERMANENTLY!

  I can make changes at this time, but all of a sudden the account of Tom is no longer presents itself as an account.

  After you restart the computer in normal mode, the account of Tom disappeared permanently and the account admin "safe mode" is in its place as a new account "Hi."

  At this point, I can create as many accounts as I want with ANY type, but I can never get windows to recognize on behalf of Tom more. create a new account with the same e-mail address, the windows to the State that account on the computer already exists with this address email... but it does not appear ANYWHERE.  The user files are still on the computer in the users folder.

  To recover from this State, I can restore the computer to a point 2 weeks ago and my account of Tom RETURNS, but unfortunately it is always invited.

  I tried the repair account tool by using the account of Tom, but obviously he invites a UAC and does not allow me to continue.  I have not tried running this tool in safe mode or to restart with the admin account but the account not found Tom. But I feel that accomplish nothing given that Tom is no longer seen as an account.

  It's not my computer. The only way I have noticed that this problem was trying to fix a webcam which is ' stuck on '... Yes, this could be an indicator of a deeper problem, or suspected of cheating. The webcam will start as soon as windows loads...? ! ? Scary! The owner had a "Computer SCIENTIST" friend working on this computer before these problems and I don't want to jump to conclusions about crippling computer and espionage through the webcam (which is now covered with Ribbon)... even if it's really a coincidence.

  Currently, re-installation of windows is a last resort solution. I'll take the easy way out without first bouncing around a few ideas.  I am EXTREMELY computer competent and tried most of the normal solutions (net user / add, administrator activate via the command prompt, safe mode, control panel of users is unusable because of the UAC).

  It's driving me crazy... I can't wait to see some good ideas!

  Tom

  I can't imagine how it would disappear.  I hope that all your files are always safe under C:\Users\Tom (or other).

  A few different things can happen depending on whether the account exists locally before joining (which, in my opinion, is a more reliable way to go).  For example, my username home folder is shawn_000 because it uses numbers if you do first an account of Ms.  But this does not happen if the account was local first and then just got "connected" to MS account later.  But you also have weird things where you have a local and an online account if you go exploring in the MMC to actual users on the PC.

  Honestly, what would be probably the best is getting into the built-in administrator account and create a local account with admin rights, you can use without being in safe mode. Basically just one for yourself.  On my system, this is my only account. I trust just UAC instead of actually use an account limited, because honestly, does anyone really run under an account that is limited each day and go crazy?

  But I digress.  I just set up your new account as a local account.  Start and login, get it all configured and drag your files on.  Then more later if you want to you can connect it to Ms.

• only one account on computer but listed as a guest account

  I have windows 8 on my HP and the only account on the computer is mine, but I am registered as a guest, so I can not delete the files from my computer, or I can approve the updates. Noone took the computer apart myself. When I go into the settings and change the computer parameter to users, there is not yet an option to add/remove users. I contacted HP support and they wanted $99.00 to solve this problem for me.

  There are several ways to do it, maybe, another will prove more successful.  Here's all that come to mind right now.  The keys WindowsLogo + R to open the run.

  • Start/Run COMMAND. EXE > users and the security for the family accounts > change account Type
  • Start/Run NETPLWIZ > double-click account > set belonging to the Group and together as an administrator
  • Click Start > computer management > users section and local groups > double click on account, then add membership to the Administrators group
  • Run this command at the command prompt, replacing username with the real user name you want to change: net localgroup administrators username / add

  That's all I can think of at this time, but once you are connected with a level account administrator (or the built-in by default), the avenues above should allow you to join your other account and set it as admin level so it can do things.

  You can also use any of these methods by resetting the password of the other account, but I don't recommend that unless it is an absolute last resort, because it is permanent damage, including the possibility of losing your encryption keys and lose access to all your data, as if your computer has dropped in the ocean. You don't want this kind of data loss.  And if you go to the risk of changing a password with these methods, save ALL your files first.

• the former admin account controlling many files how to remove this unknown account I have only one account and can not delete or move files.

  Impossible to delete or move some files because of the property with Administrator removed after upgrade to vista
  I tried to upgrade to Windows 7 & and pc crashed couldn't reload so went for new install this left an unknown error account.

  Hi all

  I was having the same problems and this message is used to solve this problem

  (1) the correct syntax for the activation of the Administrator's

  NET user administrator / Active: Yes

  Notice, there is no space after the slash

  (2) that works, I logged as administrator.

  I could just go in the folder, click on security, to change users, to remove the

  (3) now, I did run in which inherit permissions errors, here's what I did to get around that
  In the Security tab, select ADVANCED security features, find the user to EDIT the PERMISSIONS
  Highlight all users, EDIT, all DENY options to checked, will APPLY, you receive a warning about using the DENY option, just OK, OK OK, return to the Security tab.   NOW, come on in, user of the IDE and you should be able to remove this

  (4) another thing, make sure that the is not owner on any of the folders.  I've changed them all to someone else, but be careful, that could spoil you

  Hope this helps

  Happy holidays from cold, wet PHX, who would have thunk it!

  Lost_N_Arizona

• 2 two IP address are reported to use my home network and both are reported to be in the same IP addresses. I have computert that one and only one account with the provider.

  My computer is to launch my a note that I have another computer on my network using the IP, I do not understand.

  I have a stereo Kardon Karmon, a drive Sony DVD with WIFI and a printer with WIFI. 2 mobile phones and that's it. All meant to share my home network. The dvd player will not acquire the web well that directly connect to the modem. I did not any changes for several months.

  RA

  What is wifi has an IP address.  This situation occurs generally if the INVESTIGATION period have the value static or more likely in your case that the whole of the network (including the router) need to be restarted.  Usually if you restart all devices at the same time it will erase it

• KB2446708 installs "successfully" every day, and causes delay closure every time. Why not only one? Difficulty please!

  This looks like a common problem in the world, but the sons of response are no longer available.

  My insists machine on a delayed closing post refresh every time I shutdown (now more than 60 times) and recorded a successful update every hour every day.

  What can I do to solve this? What is a registry error? I am running Windows XP.

  Hi GeoffreySouster,

  Thanks for posting your question in the Microsoft answers Forum. Follow the steps in this document to reset Windows Update components.

• I don't know what happened, but I see not all email accounts, but only one of them. The rest are not displayed

  All accounts are added to the Thunder birds, but now I only see messages from them - Olga messages.

  I can't spend another profile, then maybe that I clicked on a button and it display only one profile.

  Sorry, but English is not my mother tongue, but I hope it's understandable)
  Thank you!

  In the menu bar select view-presentation-folder pane

  No menu bar? Press the ALT key.

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• Why do we have no choice to subscribe to a series of 22 application Adobe Suite CC, when as a professional graphic designer I can use only one third of them?

  Why do we have no choice that to to subscribe to a series of 22 application Adobe Suite CC, when as a professional graphic designer I can use only the more un tiers a third of them, why can we adhere to the Adobe Suites like they configured as they used to be?

  Why can't the updates, minor and non-Visual, is not limited to (at most) half-yearly, having to deal with the constant evolution of the interfaces in Dreamweaver is a waste of time for most professionals!

  You can buy only one app CC too or a beam of light & Photoshop.

  https://creative.Adobe.com/plans

  Concerning

  Stéphane

• Adobe story - film script has only one model. Why? For example the script TV has more models.

  Adobe story - film script has only one model. Why?

  Hello

  With TV, we found that all productions has a different format and that's why we added some samples formats that have been requested. With the Film, the format is better to be in a standard format (which we are in our model of film).

  Kind regards

  Sunny

• Shoot only one email for each account

  I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.

  Varun says:
  I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.

  Assuming that all of the 5 different emails are in a single column

  SELECT account,email
  from (select Account,email,row_number() over(partition by account) rn
  from your table)
  where rn=1
  

  Hope this helps

  Kind regards
  Claudy

• One of the pages of my site will not display the Amazon links for the books that I sell. Only one book, wiich isn't on Amazon screens on the page. On Internet Explorer, display all my books. Why?

  Since the conversion of my site to the 'Recommended reading' page of WordPress does not display the book, I have listed this link to Amazon. Only one book associated with another Web poster site, but not Amazon Books.
  This does not happen on Internet Explorer. I asked this question last week, but received no response.
  Can you help me? Go to: www.transitionexecs.com and click on "Bibliography" to see what I mean.

  You have ad-blocking software?

  These links have ad in the url that may trigger such software.

  See:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I forgot the admin password, can only one computer access through standard account...

  yesterday (September 3) around 07:00 I change the password of the only admin account and today I kinda forgot about that... and the only way to access what is on the computer with the standard account only... is any way to retrieve or reset the password before sept3? need help please, I have really important things there and I need to work on it as soon as possible...

  I'm sorry, but you have received the information from Microsoft available.

  Try a local computer repair shop.

  Vista and Windows 7:

  http://support.Microsoft.com/kb/940765

  If the above does not help you:

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Why I can't install adobe get: 'only one instance of this application can run.

  Hello, can someone help me with the installation of Adobe Flash Player?

  I tried too much to install but get this message "that only one instance of this application can run.

  I see all the Adobe apps, I tried to remove all of the adobe files and still nothing.

  I opened the Task Manager and try to complete the process associated with Adobe manually by selecting 'End process' and then try to install it, but nothing happened.
  I tried "clean boot", but none worked. I downloaded the "Adobe unistaller' official page and"the latest version of flash player"but it does not work!

  I also went on the Adobe Web site and it says this error message was due to the flash application, but I deleted all the files in and still nothing.

  I have firefox.

  I suggest you to check with Adobe on this point, its something specific request.