Why is still as slow as Vista with copying files from Windows 7?

Similar Questions

• How can I copy files from Windows Mail (Vista PC) of my drive external segate to my PC Windows 7?

  I have my backups on my external drive Seagate Free Agent of my old PC of Vista Windows that died. How can I transfer my files from Windows Mail, photos and other files to my laptop which has Windows 7 from my external hard drive. I used Windows Backup and Restore to create my backup files.

  Thank you for your help.

  File messaging in windows 7 does not work. So even if you copy the files etc on win7, windows mail usually run in Windows 7

  There are sites with copies of windows mail that you can use it on Win7 (including the reg files), so it will work properly

• SAN storage 2 Gb fiber fast but slow on VMWare with direct access from Windows

  <! [endif] > <! [if gte mso 9] >

  So that's my problem, we use a HP MSA 1500 (I know,

  not that fast), but we run a small store, 4 guests, 30 total VM, 2 Broccade 16

  fiber ports to 2 GB, all force at 2 GB. The SAN as a controller 2 cache 512 MB

  each, discs MSA30 14 15 k 146 GB, 1 large raid 5, 1 spare label + / LUN 15, us

  also have a dedicated server, no VMWare backup and other applications,

  Server are all DL585G2 32 GB RAM. The MSA is running active/active, Latest

  7.2, Qlogicqla2342 firmware latest firmware. All the servers to update. We have many trya

  the scenario, VMWare 3, officially support VMWare 3.5 and 4.0 fully patch,.

  If I give my 2 Terabyte LUN 1 to my Windows 2003 server dedicated who

  have direct access to the San, will achieve a transfer rate up to 50 Mb

  per second on a 2 GB files. If a movement the LUN of VMWare server, start my

  virtual Windows 2003 Server (32 or 64 bit) and try the same transfer, max

  I realize is 5 MB per second. Add that on all the server of VMWare 3 version I have

  test, what I did wrong, we know that the SAN is capable of faster transfer, the

  test on HYPER-V with the same hardware configuration is much faster, my only

  last resource are you guys!

  Before you change the type of the startup disk controller, Windows should load the drivers for this controller. The best way to achieve this is to temporarily attach a small virtual drive (100 MB will do) with the controller for the virtual machine. When Windows starts, it must acknowledge the new controller and load the drivers. Then shut down the virtual computer, remove the temporary disk and change the type of the startup disk controller.

  André

• Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  So it will not uninstall then install my programs, or what, then another question is the offer for $14.99, that's what I was watching and I filled a free upgrade and probably has not been fully tested for this upgrade, he said I would be able to get the upgrade, but there is no decrease in my emails guess still in work. While {s it improves just $ 40 million that I should wait for a version pro or ultimate?

  And what will happen to my saved files?

  and I'll be able to restore to the factory with warranty setting and I can use my series to my computer for the upgrade?

  NOW please if you don't know it please tell me I would like to know some facts and since there is so much development, in my view, the pro version is yet to come, so...

  Windows 7 Starter is not eligible for the offer of $14.99.  Only Windows 7 Home Basic, Home Premium, Professional and Ultimate. If you must upgrade to Windows 8, then you have to wait on the upgrade $ 39.99 for Windows 8 Pro that will become available October 26, 2012.

  The upgrade will allow you to keep your applications, personal files and settings.

  Yes, it should be able to restore the factory State, but always backup before making changes on your computer like installing an operating system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

• I'm trying to transfer files from windows xp to windows 7 Professional. Problem is that the easy transfer from xp to vista.

  Try to install Windows Easy Transfer to migrate files from Windows XP to Windows 7 Professional. Problem is that Microsoft has established transfer only from Windows XP to Windows Vista?

  Windows Easy Transfer for use with Windows 7.

  Carey Frisch

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Working with photo files in Windows 7 without SLide-Show, etc.

  Y at - it an option to work with photo files on Windows 7 WITHOUT using the slideshow, Sky Drive Option, etc...  I want to attach a file of unique photo to an e-mail message without these being included.  What program can I use to open these types of files?  Included in the .jpeg files could be scans of any document...

  Paint, a part of win7 can open photo files, not that you need to post a photo.

  By default, your image files are stored in libraries > photos, providing any image file has a descriptive name, in your e-mail software, new message, you select 'Attachment' and then in the window that appears navigate to the location of the images, it is an add the file.

  You can also use the free Picasa program to catalog your photos, and depending on what email program you use, there is an option on a photo to send this photo

• Why does my SkyDrive icon display not in my favorites from Windows Explorer?

  Why does my SkyDrive icon display not in my favorites from Windows Explorer? I installed on my PC under Windows SkyDrive 8, but Skydrive icon does not appear in the Windows Explorer Favorites? How can I fix it?

  Thanks for your response - I did this and the last step of drag or copy in the Favorites list failed. He said "can't put in Favorites? This is the real icon for SkyDrive placed on desktop as a shortcut. Any thoughts?

  Hello

  Right click the Skydrive shortcut that you created, and select copy.

  Open Windows Explorer and navigate to the C:\Users\your name\Links folder.
  (Where 'your name' is the name of your user account)

  Right click on the links folder and select Paste.

  This will place the Skydrive folder in the Favorites list in the file Explorer.

  Concerning

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• I have a problem with the transfer of files from Windows Vista to Windows 7.

  Original title: transfer files from Vista to Windows 7. Type of processor

  I just bought a new computer which has Windows 7.  I am trying to transfer the processing of speech and spreadsheets from your old computer to new th but all I can manage is a file of jarbled letters on a program called Word Pad. Can someone tell me if there is a secret code for this?

  Windows is NOT equipped with Office installed. You must install your copy of Microsoft Office on the new computer.
  And how on EARTH this has nothing to do with Windows 7 security, privacy, and user accounts altogether, I can't see...

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• Why not Win 7 search easily or reliably find files from subfolder and file specified?

  I've been using Windows for a while now, since version 2.x. I am currently using Windows 7 64 bit. I need to find a file. Not exactly rocket science. Let's say it's fichier.ext. I know that one or more copies of filename.ext reside inside or under C:\folder\subfolder1.

  So I open C:\folder\subfolder1 in Windows File Explorer. I press {COMMAND} + {e} for the search box and type filename.ext, then {ENTER}. The search returns 99 items. Unfortunately, 98 of them are not named fichier.ext. It sucks, but whatever. 98 results for the most part irrelevant are sorted by ascending file name. UH... I know by running DIR/s that there are actually 7 files named filename.ext residing in these subfolders. But Windows 7 search gave only 1 of them. The resolution of the problems of research said that everything was fine. All seem to have file system permissions. So here I am with 1 relevant result and literally 98 irrelevant results. It sucks. The files are not hidden. ATTRIB shows that they hear only the flags of A (rchive). I can find no reason why search gave no relevant results 98, yet returned only 1 of 7 planned relevant results. No, I'm starting to do this just to write a rant on the search for Win 7. I wanted just to finish a task, which would have been relatively easy in all previous versions of Windows, I used.

  Given that the search for C:\folder\subfolder1 does not work, I try searching for C:\. Guess what. 43 items returned, and only 34 of the results are irrelevant. From C:\, search found 7 all the relevant files. It's a Festivus miracle! But how a top-level folder got no less relevant results, but most relevant results doesn't make much sense.

  16% of the relevant results are grouped because they are sorted by filename ascending. Now, the company, right? I want the full path and the name of each of the 7 compliant files that I know exist. Who do not ask too, right? Except that there is no way to copy the text in the column of the file. And the text in the folder column is absurd anyway. The folder column shows "subfolder5 (C:\Folder\Subfolder1\Subfolder2\Subfolder3\Subfolder4). Why on Earth is subfolder5 on the left? And there is no place I can copy the path. OK, no problem, I'll just do a right click and open the file location. In fact I use {SHIFT} + {F10}, {i} instead of Right-Click, but it's because I have old habits when there was usually effective ways of doing things in Windows using the keyboard.

  Thus, opens the folder containing my first relevant result. {ALT} + {d} which brings me to the address bar, where I already have the full path. Now I just type "\" and the first characters of the file name and it completes automatically. {COMMAND} + {a}, {COMMAND} + {c} and it is all copied to the Clipboard. Yay, I got my first string path\filename successfully, so I can really accomplish something. I launch an instance of Notepad and paste it in for later use. Now back to my remaining 6 to search relevant results... Hmmm... {ALT} + {left} does nothing. Focus changes often without apparent reason in Win 7 files and the Search Explorer, which prevents the work strikes. So I move the mouse and click the left arrow to go back to my 6 other relevant results. That's when I find that search threw all the results. I have to wait while it does search through each file under C:\. Ugh.

  In an effort to avoid having to search several times C:\ 5 times more unnecessarily for fichier.ext, I'm thinking maybe I can click the button start and try to type here, let semi-automatic paths as I type the content of the column of the file. It does not, because the start menu obscures my 7 relevant results. I later I knew that even if they are hidden, I could select the relevant 7 of 99 total results and the selection color stick while the start menu hidden items in the name column. But in the end, the fastest way to get the 7 paths was actually copy via the mode prompt QuickEdit on DIR /S FILENAME command. Results of the EXT. I mean, really?

  Windows search cannot locate surely known names of files in a subfolder that is known? Win7 search not only gave me 98 irrelevant results, but also failed to find 6 of the 7 specified files. How screwed is that? But DIR/s gave me no irrelevant results at all and find files with 100% reliability. Does this strike anyone as being a little... uh... bad?

  Find names of files specified in a specified subfolder does not appear as a rare user scenario. Simply how to find a record of a known file in a known subfolder name seems ridiculously too complicated in Windows 7.

  Now, there is a _ a lot of good things on Win 7. My favorite features are probably support for multiple processors, accident of insulation, and the incredible improvements in design and material compatibility layer makes this Win 3.x prey. But please, I seriously hope that someone will take a look at some of the pieces of this real scenario common and try to improve things in a future service pack or something? Pretty please?

  Noel, thanks for the great suggestion! I * never * would have discovered the ' file name: ' filter with the help of Windows.

  I had no idea that there was a search syntax. It seems totally weird to me that the add a drop-down list box filter search doesn't give IU for update and size filters. I think that corresponding filename deserves its own button there and something to direct users to this overview of query language syntax.

  It's really great to know adding "leader:" to restrict the results to only compliant file names. I am completely floored that it is completely impossible. I would * NEVER * have discovered that the link of query syntax. There is no link between the search Help topics. Windows Search 4.0 is somewhat a component name internally. As an end-user of Windows 7, I consider that the search for files to be an integral part of the operating system. I would have never thought to search for help on "Windows Search 4.0". FYI - I just went to the research, a help file topic or a folder and a suggestion to make a link to the news of search query to win 4 left.

  I fiddled with the columns, remove the folder column and replacing it with the much more logical folder path column. I was happy to find that the next time I opened a search for C:\, the path of the folder column persisted.

  When I search libraries, I have the search box offers some filters, like, Date of modification, Type, name, path, Tags. This never was told to the "queue:" filter that I needed. The "name:" filter only appears when searching for my libraries, do not then the research to another part of my drive. Research on "name:filename.ext" returns all files where {(extention == «ext») & (filename contains "filename")}, for example, returns 'fu_filename.ext', 'filename_bar.ext', 'fu_filename_bar.ext', etc.

  In the results, the context menu doesn't give me a copy as path option. The closest I can find is going to file properties, I can manually copy the contents of the location.

  Rest of questions that I hope THAT MSFT would consider to improve:

  1. "file name:" filter is totally impossible, causing in search of filename otherwise quick to take minimum two times longer, useless due to analysis of the content of the file.

  2. DIR /S C:\FILENAME. EXT runs twice faster than Win with essential Search but impossible ' file name: ' filter, often up to 8 times faster than without the discoverable ' filename: ' filter.

  3. DIR /S C:\FILENAME. POST do not clutter results with files whose content contains the string.

  4. DIR /S C:\FILENAME. Reliable EXT returns all the relevant results.

  5. I can copy each path of results returned by DIR /S C:\FILENAME. POST in a single step (with QuickEdit active guest).

  It's not too terribly demanding to expect a file search v7 o/s to at least on par with the performance and ease of use of a query of type MS-MS-DOS age 30 is?

• How to decrypt files from Windows vista using windows 7?

  I encrypt files in windows vista. as I now currently using windows 7, but I cannot decrypt the files. Other ways I can decipher? Your help is appreciated!

  Hello vinceteng,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with decrypt files.

  1. How do encrypt you files in Windows Vista?

  2. do you get an error message when you try to decrypt the files?

  Perform the steps from the link to decrypt files and check.

  http://Windows.Microsoft.com/en-in/Windows7/encrypt-or-decrypt-a-folder-or-file

  Answer to us if you are having problems with the decryption of the files or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Create a CD with jpg files in Windows 7 to be read on Mac

  I am aware that most advanced users would scoff, but yes, I work under WIndows and my only hope is that the quantity huge knowledge, professionalism and kindness, combined with inquiring minds, that I find on this forum, could help me find the solution. I am trying to create a CD with photos in JPG format. The CD must be red on a Mac. The only thing I know about Apple is that the o/s is different from Windows. MAC user doesn't know much on his computer and said that usually, when you insert the CD, it appears on the desktop. Those that I created in Windows are not. Could someone help? Thanks in advance.

  Well, I just answered my own question and am posting this just in case someone else had the same problem. The new format of files is universal, so, basically, if you work in a newer Windows (Vista, 7) and Mac is at least version 9.0, it would not have problems playing disks in Windows. I had a problem because the Mac machine that I was trying to read the disc of Windows was old. If anyone is interested to learn more about, here's a link to an array of explaing the o/s formats

  http://en.Wikipedia.org/wiki/Universal_Disk_Format

• Why can't access, save and print a PDF file from the site of EDF energy? Other work.

  EDF is my energy supplier and I use "Paperless billing" with PDF files for access, save and print my invoices in Acrobat Reader ms. I cannot do it in Firefox, but can do with all the other Web sites. I use I.E. 11 to access invoices EDF. Y at - it a Plugin/work around that I don't know it please? Thanks for your time.

  Hello jscher and thank you again for your continued support.
  I found the cause of my problem to the installation of the new Adobe Reader DC.
  The new Reader immediately now all PDF files new downloads to libraries > downloads. Previously, (under Adobe Reader XI and previous versions), this process had to be physically carried out. I rarely visit the source of downloads, so missed.
  CD player is now a very complex program and I need to explore further. Thank you for your advice and I apologize for what amounts to a waste of your time.