Why is there no notes on the watch, is it a joke?

Similar Questions

• There was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (1) there was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (2) where can I find so that I can then reinstall windows XP, updated to sp1, install the patch to see the complete player to sp2 and 3 can be installed?

  original title: supervision XP

  Maybe the disc has been formatted as part of your original installation of Windows XP with a pre - SP1 version of Windows.  At that point, he could only format the drive as 137 GB.  After you upgrade to a post-SP1 version of Windows, look at your hard drive with Disk Manager (start-> Run-> "diskmgmt.msc").  It can show the rest of your unused space that you might then be able to allocate in a second partition.

  If you want to keep one big partition, you will need to get a 3rd third party tool that can extend your current 137 GB partition to use more of the available space.  Google for it, plenty of them out there including those that are free.

  HTH,
  JW

• Why is there an update for the version 17.0.0.134 MSI?

  Why is there an update for the version 17.0.0.134 MSI?  I am authorized to distribute in my company.

  Hi Michael,

  MSI update installation programs are now available on the licenses page.  There is a long thread about this in 17 Flash .msi is not available?.

  --

  Maria

• Why is there space located above the tabs in Firefox 31.0?

  Why are there empty space at the top above the tabs and the address bar and minimize fullscreen and close the icons at the top right? Restored the default without impact theme, change seems to happen on FF 31 update.

  Try the negative margin top for the bar tab (#TabsToolbar) with the code to userChrome.css

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #TabsToolbar {margin-top:-1px!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

• Why FIFA 15 is not on the app store?

  Why Fifa 15 is not on the app store? I want to download it please take... My phone is Iphone 5 IOS 9.3.2

  You will need to contact the seller, it is a forum for Apple users

  You can also try to get your App Store app > purchase and scroll until you find so you can install it, should they have not removed from the App Store.

• Why Flash cookies are not deleted the first time I'm leaving Firefox?

  I am running XP, Firefox 16.0.1 and Flash Player 11.4.402.287 and have Firefox configured to 'Clear history of Firefox closing', with 'Cookies' (among others) checked "settings to erase history. I also have Flash Player configured to "Block all sites to store information on this computer."

  As I understand it, from Firefox 4 and Flash Player 10.3, have Firefox configured in this way should cause cookies Flash should be deleted out of Firefox. I also understand that even though I have Flash configured as I do, a list of websites that try to plant a cookie Flash is always recorded in the main settings.sol cookie.

  I noticed, however, that this list of empty Flash cookies is not removed the first time I have quit Firefox; on the contrary, the list is deleted after launch and then leaving Firefox again.

  Here is a step-by-step example:

  (1) Control Panel-> Flash Player-> storage tab-> storage Local to Site-> button settings confirm that the list is empty

  (2) output, that manage Flash Player settings

  (3) launch Firefox-> go to http://www.Hulu.com/ and click on a video to start playing

  (4) recovery Control Panel-> Flash Player-> storage-> Local website storage settings... tab button-> make sure that the list indicates http://www.Hulu.com/, 0 bytes, block

  (5) leave the Flash Player Settings Manager

  (6) Firefox exit

  (7) raise Control Panel-> Flash Player-> storage-> storage settings Local to Site-> NOTE THAT THE LIST SHOWS AGAIN http://www.Hulu.com/, 0 bytes, block

  (8) leave the Flash Player Settings Manager

  (9) restart Firefox

  (10) raise Control Panel-> Flash Player-> storage-> storage settings Local to Site-> NOTE THAT THE LIST SHOWS AGAIN http://www.Hulu.com/, 0 bytes, block

  (11) exit the Flash Player Settings Manager

  (12) exit Firefox

  (13) stimulus Control Panel-> Flash Player-> storage-> storage settings Local to Site-> NOTE THAT THE LIST IS now EMPTY

  Once again, my question is - why this list is not emptied the first time around?

  Safe mode disables plugins, I think not, so that you can put those aside for now.

  I suggest disable all non-essential extensions. We all tend to accrue to those who are not really necessary. You can do so here:

  Orange Firefox button or classic menu Tools > Modules > category: Extensions

  If the kernel extensions, you really like the cause of the same problem, then I think you will have to just live with it. Please note that Flash is followed correctly your bet as a block, so I don't think that something is actually stored.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Why is there no Notes app because I watch?

  Why is there not a notes for Iwatch app

  Hello

  I'm afraid that no one here can answer this question (it is a user-based community of technical support).

  If you want to suggest that Apple consider adding Notes to Apple Watch, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Why 6 Lightroom does not matter the keywords in the XMP from previous versions?

  In previous versions of LR from Lightroom (1, Lightroom 2 and, above all, Lightroom 3, 4 and 5 of Lightroom Lightroom) I made sure that my changes are written to the XMP file on and images.

  This allows me to receive a file froms someone else generally, or send one of my files to someone else and the changes, keywords, etc. will be in the DNG file.

  When you import an image (or a folder of images) a disk hard having keywords in the XMP of DNG file, these keywords are lost when importing to Lightroom 6.

  If I export as catalog from an earlier version, and then import into the catalog Lightroom 6, key words are there.

  But the point with XMP should be that changes and keywords are in the file and is not lost.

  So why not Lightroom 6 see and import them?

  I imported a file and supposed to apply any metadata during import (which contains only Copyright information).  This has actually imported stars, colours, changes, IPTC, keywords, EXIF as it should.

  Rely on the observation of mcucinat, the preset selected metadata to apply when importing is clearing the fields.  Make sure that you don't have a check mark next to one of the fields in the preset:

  

  

  A common mistake is to have the check mark on an empty field - which will Erase the field when you import the pic.

• Why are there no sound when the selection of input/output points ingest miniature?

  During the ingestion of video from an SD card, why is there no audio when you choose an entry/exit point before transcoding? Sometimes there is a specific sound bite to ingest a clip rather than the whole thing or try to guess where the sound bite begins or ends.

  Hi Tommy,.

  During the ingestion of video from an SD card, why is there no audio when you choose an entry/exit point before transcoding? Sometimes there is a specific sound bite to ingest a clip rather than the whole thing or try to guess where the sound bite begins or ends.

  That should work well. I just test it. Make sure that you have copied all the SD card before you start eating, not only the clips.

  Thank you

  Kevin

• notifications not appearing is not on the watch

  My phone reviews do not appear on my watch?  Any ideas how to solve this problem?

  Restart your Apple Watch...

  To disable Apple Watch, hold down the side button until they appear the sliders, and then drag the cursor off the power to the right. To reactivate Apple Watch, hold down the side button until the Apple logo appears.

  Then check the Notifications.

  If you still don't see notifications on your Apple Watch...

  When your Apple Watch locks or you turn on do not disturb, your notifications go on your iPhone instead of your watch.

  • You will see on your watch when your Apple Watch locks. If your Apple Watch has an access code, it automatically locks when you wear it, when she loses contact with your skin, or while he is in charge.
  • If do not disturb is activated, you will see on your watch face. To turn this feature on or off voltage, drag upward to watch dial, drag left or right to the gaze of settings, then press on .

  «Notifcation alerts appear on the Apple Watch when you wear them and it is no longer blocked.» And your will get not all alerts on your Apple Watch if you are actively using your iPhone. To display missed notifications, slide down on your watch face. »

  Above quotation is available on your iPhone. Tap the watch application icon and notifications.

• can I manually add a workout to the application of the activity (e.g. swimming when I'm not wearing the watch)

  Can I manually add a workout (such as swimming when I don't wear the watch) to the application of the activity?

  Hello

  It is not possible to add workouts directly in the implementation of the activity.

  Health and fitness data Apple Watch, iPhone and any other source are rather grouped by health on your iPhone app. Combined data is reflected in the application of health dashboard, which adjusts the results to avoid any double counting of data from different sources.

  To add a workout:

  -On your iPhone, in the application of health (icon: red heart on a white background), go to: data on health (tab) > Fitness > training > tap Add a data Point > enter the result of your workout.

• Why my computer does not recognize the CD when inserted?

  I am trying to install a software on CD, but the computer does not recognize it.  I tried even my audio CD but they is also not recognize it.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Why my lightroom does not export the edited versions of my pictures?

  I edit all my photos in lightroom and it worked for me in the past. Recently, something happened with my computer, I decided to save my photos on a disk outside, just in case my computer does not turn in a single day. I saved the catalog to my hard drive, it was wrong to me? When I opened first lightroom after it backs up it said something about 'do not find the catalogue' so I just hit well and saw that all my photos were always there so everything was OK. But now that since my lightroom exports only the originals of the pictures, even if I change the photo. I have not found someone with the same problem and I'm really at a loss at what to do. Someone please help. I have wedding photos that are supposed to be done for someone soon so I really need this fixed a problem.

  I got really the problem right after I posted this. I could have sworn that I deleted my question. Thanks in any case!

• Why my printer does not recognize the elements I want to print from the internet?

  When I try to print anything from a website, as my printer opens, but then a box shows that the printer is not not connect while I can print the item.

  What version of Windows, including service pack, do you use? (Note that the article referenced by the 'Support' engineer applies to some versions of Internet Explorer used with Vista and Windows 7).

  What printer brand and model do you have?

  How the printer is connected to the computer (Networking Wireless, wired, USB, parallel, others)?

  What is the exact text of the error message, without paraphrasing?

  What happens if you go on the web site by using Internet Explorer and try to print?

  Does the problem occur at more than one web site? If no, please indicate the URL of the web site problem.