Why is this blue clip in the timeline?

Similar Questions

• Why can't drag clips on the timeline?

  I'm new.

  Why can't drag clips on the timeline? I put points and exit but the clips will not drag.

  It seems that the files have not been entirely imported. I think that I have now. Thank you very much.

• My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  Found an answer online. Here it is:

  I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

  Go to file > project settings > General and only software switch.

• Dragging several media in vertically stacked tracks clips in the timeline? Is this possible?

  Hoping that some Adobe Premiere Guru might be able to lend insight into what apparently should be a fairly simple thing to do... but despite scouring the web, I can't seem to find a glance of a solution for this.

  My neighbor (who, either by the way, I got to go with first CS5.5 as its NLE of choice as a result of uncertainty FCPX) working on a project of 'reality-style' where they have a massive amount of cameras working simultaniouisly hours and hours on end. think that the style of the Big Brother House.

  Essentially for every hour of the sequence, he creates a project in which all the multiple camera (MOV) of the images of this time are listed/linked to the thread in the project Panel. For example, for the TIME being ONE, it has images of all 20 cameras (or other) currently one that there are listed.

  BASICALLY what he wants to be able to do is to grab ALL the sequences of these different cameras AT the SAME TIME, drag them on the timeline, and when he leaves fall there, the video (and, conversely, audio) clips STACKED vertically, one above the other, each taking its own course in the timeline panel.

  Currently, of course, when he does the images organizes itself in the end-to-end scenario. In the case of my HOUR ONE, 20 example of CAMERA, this essentially creates a long clip of 20 hours, as unlike a clip of an hour with 20 tracks, stacked one on the other.

  As far as we can tell, have there is no shortcut to get there. I VAGUELY remember being able to do this in FCP (maybe?) so I'll be dazed and more than just a little disappointed if there isn't a way to pull this off in first.

  Does anyone have an idea if this mode to automatically fall of clips in the timeline as superimposed tracks is possible? It, literally, to save him hours and hours of work if he can understand the secret. And I don't feel as guilty for him after having turned on the creation of this special project!

  And if someone knows that it is NOT possible, it would be great to know as well. At least, we can put the concept of room one way or another.

  Thanks in advance.

  Best regards, Michael

  You can do this with the command sequence camera make multiple source in Premiere Pro CS6 (note that this has been posted before CS6 launch):

  1. Mark clips
  2. Select the clips
  3. Choose item > create sequence multiple camera Source
  4. Choose the style of synchronization, and then click OK
  5. Right-click on the camera sequence multiple source and choose > open in the timeline.
  6. Clips are now stacked inside a sequence

  More details here: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html #source_sequence_for_multi_camera_editing

• Why can't drag a clip in the timeline?

  I just loaded PP CD5 on my Win 7 laptop.  Can I import video clips into my project, but I can't drag one of these clips in the timeline.  When I try and do slip, I get a helping hand with a symbol of the "no entry".  No error message any.

  I vaguely remember having this same problem when I loaded PP CS5 on my Win 7 office several months ago, and I thought I found something on the forums who told me how to fix it, but I can't find it now.  Maybe a change in preferences?

  Any help is greatly appreciated.

  Have you actually created a sequence? If not, go to file > New > sequence, or drag one of your video clips to the icon of a new element at the bottom of the project Panel. You can also click on that to get the option new sequence.

• Issues every time I try to import a clip on the timeline on first Pro CC. anyone else having this problem?

  I will have questions whenever I try to import a clip on the timeline. It imports the sound but not the picture in time.

  They play perfectly on the Source monitor and even hover on the bins scouring, but cannot slide on the timeline.

  I found that it allows me to replace anything on the timeline with all that is on the Source or the bins, but not directly place.

  I work with the Canon C100 files on first Pro CC (2015.2) On Windows 10

  But it happens with all type of formats. Obviously not codecs problems.

  How can I fix that?

  Sounds like a follow-up/patch issue, in general, you do not have the blocks to the left of the command sequence "checked" block to allow the targeting of these tracks. These things...

  

  Neil

• I can't import video clips in the timeline. Import clips from video al chronology of first CC,

  I have a problem. I can't import video clips to the timeline, it is important only audio. I have hand appears locked. How should I do? Thank you!

  I have a problema. No puedo import clips from video al chronology of first CC, solo importa el audio. Me appears the mano locked. How solucionarlo? Gracias! @

  Hi Albert,

  Please visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you

  Ilyes Singh

• No audio track appears when I drag the clip to the timeline.

  Hi, this problem has just. When I try to put a video file in the timeline, only the video portion appears. I tried different types of video file, and the result is the same. I still have PP CS4 and experimented with the same movie files, and it works perfectly. This is probably a simple solution, but I've exhausted all my ideas. Help, please! I'm under PP CC. Thanks in advance.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

  After the clip in the timeline, there is no audio track of the clip more

• iMovie 10.1.2 adjust the size of the clip in the timeline

  When I move a clip in the timeline, the size is reduced to a point where I can't move titles correctly.  I tried the setting of the slider, but it does not affect the components of the package.

  Hi, David,.

  You use the scroll bar that you get when you click the gear in the top middle of your screen.  This bar only works on clips in the clips pane, not in the time line.

  The slider beside the button settings in the middle right side of your screen expands the time line so that the clips in it are spread out more.

  Also, if you click on the settings button, a dialog box appears that contains a scroll bar to adjust the size of the clip in the timeline.

  Hope this helps,

  -Rich

• Cannot move the new clips on the timeline?

  Hello world!

  I just recently changed a project I was working on. As I am new to the program, I always get a hang of things. Everything was fine until I used the link between after effects and first to fix a clip. When I got home first and wanted to add a new video just froze. I thought it was a bug, restarted the program and tired again, but the same thing happens again. It has been a few hours now and I have tried everything I can think off but I still get the same result.

  I'm trying to put a new clip in the timeline and the whole program freezes as soon as the clip touch the timeline. I can't click anything, I can't move anything, I can't even close the program without the Task Manager. Although I can still play the project using space and saving using CTRL + S, but it's as if the mouse disappears first. This is quite annoying because I can't keep my project because I can not add new clips, no idea how to solve this problem?

  Thanks in advance!

  You have a point set at the beginning of the sequence.  This is what is at the origin of the gel.

  Delete items In/Out and things should work fine.

  This is a bug that adobe is trying to correct.

• My first stop runnig suddenly when I try to drag a clip to the timeline or after scoring its entry points and in the Preview Panel, I try to drag it to the timeline.

  Suddenly my first Pro CC 2015-2 arrested runnig when I tried to drag a clip to the timeline, or when, after scoring its entry points and in the Preview Panel, I tried to slide the timeline. Apparently it works because it keeps at the opening, but one cannot do anything but you close with control Q; the keys on the keyboard are one thing that really works.  I can't do anything with the mouse and it seems that a certain way, the software crashed, but with all the panels open and without any warning. I copied the complete proyect to your laptop with the first Minister Pro 2015-1 and it happened the same thing, so I think the question is on the project and it started to happen after the update by 2015-1 about 10 days ago (this is not the first time that's happened but to this day I don't know how every time it turned fixed) old work projects and I finish the proyect (from scratch from another) on the same computer and with the same OS (windos10) without any problem with the Premier Pro CS6. So far I have not had problem with the version of 2015-1 that I bought last November. Could someone tell me what is happening and what is the solution?

  [edited by mod, too long title]

  Fixed with a new version of the same driver 341.92. I hope that it will be forever. Thanks for your advice and also thanks to the chat support team that came to the same conclusion.

• I want to delete 100 + sequential clips from the timeline; How?

  I want to delete 100 + sequential clips to the timeline, how?  Of course, I can do this by highlighting all of them, but that may take an hour or more.

  Use--> timeline--> selection follows head, jump with the arrow keys through your timeline, lift the clips that you want to remove with 'alt' and 'up arrow' and remove the top video track in the end.

• You can select a group of clips on the timeline to loop through reading?

  In order to help me learn reading and lessons complex clip I use Premiere Pro to isolate sections of the difficulty of the study. I have independent clips on the timeline laid out in groups, each group marked with color labels so I can review and play only the groups of clips, or "parties", overall, but I would like to isolate each of these groups a little more if I could play each independently "in the loop" so I can still study them independently and isolated from others. Is it possible to do it on the timeline? I know I can score points on the clips themselves in the preview and output screens and loop, but now I would do each set of clips on the timeline in loop in the sections of clips. I hope that I wrote this clearly.

  Put them on a different schedule and those in the playback loop.

• No related video and audio when using a sequence of nest in the source Panel and try to insert a clip in the timeline

  When I use a sequence of nest in the source Panel and try to insert a clip in the timeline, the video and audio are not related. Before this update (2015.1), I did not have this problem.

  

  Hi Daniel,.

  I can confirm this matter and will get a logged bug. It is a pain, but after having been published in the sequence, select the audio and video components, right click and select 'Link' to link the components between them. Sorry for the inconvenience.

  Colin

  First Pro EQ

• very jerky playback for H.264 clips in the timeline of the MCCP 2015.1

  Since the update for first Pro CC 2015.1, I noticed that playback is now much choppier. So far I could always play any video of any format very smoothly. I am currently loading A7s2 Sony 4 K H.264 clips in the timeline, and this has never been a problem before the 2015.1 today update.

  But if I fast forward in the timeline panel, reading becomes very agitated and much more during fast playback in reverse.

  Everyone has noticed that since the update to 2015.1 today?

  Even if I drop the playback quality all the way up to 1/8, 2015.1 CC PP seems to choke when fast forwarding or rewinding.

  The good news is that I just spoke with Adobe they assured me he will release a totally stable version of 2015.1 in 2-3 weeks maximum, for some before Christmas, they said.

  Yes, I would return to 2015.0 as well, but the only option I see 2014 with the police of the yellow interface is available. I would not go back too far. Just for June 2015 update.

  Hi Ninose,

  Here you go: install an older version of any creative cloud application

  BTW, what kind of computer you have?

  Thank you

  Kevin