Why is this Windows driver Package take 37.3 GB?

My drive hard to say that it is almost full, which surprises me. I check in programs and features, and it is said that my most important program (by far) is "Windows Driver Package - Cirrcus Logic, Inc. (CirrusFilter) MEDIA (13/10/2009 6.6001.1.16)"-which weighs in at 37.3 GB. "."

I can't find information on the program, but it takes place half of my Windows partition. I found a page Yahoo! answers where a guy and his only fold unanswered were astonished that a similar program were taking up to 8 GB... But 37? What is this monster?

I use a MacBook with Windows Vista on BootCamp. I don't know what other system specifications. I have to give. Thanks in advance for your help.

20 GB is a very small amount of disk space for Vista or Windows 7.  Allocate more disk space.

"sheffee" wrote in the new message: * e-mail address is removed from the privacy... *

I use a Macbook Pro and started twice as well, and I allocated only 20 GB because I'm using a program under Vista, but all of these updates are too much space. Is this because Vista is older and this is why there are so many updates? Should I just use Windows 7? It's frustrating because I have no more space on the left but as 57 Ko... KILOBYTES! >:(

Tags: Windows

Similar Questions

  • When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

    When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
    Installation package. A program required for this install to complete could not be run. "Help, please.

    Hello..

    Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

  • There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

    There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

    Repair Apple Software Update of programs and features, Control Panel, and then try again.

    If not for general advice see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    TT2

  • I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

    Hello

    I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
    I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
    I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

    Any of you have an idea what can do?
    Thank you!

    Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

    Original title: I'm loading Quciktime.

    When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

    Hi Tonyb13apb,

    ·         The issue is limited only during the installation of QuickTime?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: Uninstall and reinstall QuickTime and check.

    http://support.Apple.com/kb/HT1925

     

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

     

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    a. click Start, select run.

    b. type msconfigand click OK.

    c. the system dialog Configuration utility appears.

    d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

    e. When prompted, click on restart to restart the computer.

    If the problem persists, you can contact Apple support for more help and information.

    http://support.Apple.com/kb/HE57

    Let us know if it helps.

  • When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. »

    Windows Installer package error

    When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. "I downloaded Windows Installer 4.5, rebooted and tried again with the same results.  How can I fix?

    Hello

    Important The Windows Installer Cleanup (MSICUU2.exe) utility that was previously referred to as in this article has been abandoned. Although the Windows Installer Cleanup utility solved a few problems installing, it sometimes damaged other components that have been installed on the computer. For this reason, the tool has been removed from the Microsoft Download Center. program install and uninstall problem solving

    (http://support.microsoft.com/mats/Program_Install_and_Uninstall)

    is a replacement for this utility.

    "The problems with programs that cannot be installed or uninstalled.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And see if this information helps you install iTunes:

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

    http://support.Apple.com/kb/HT1923

    If the advice already given does not, please contact Apple for assistance.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

  • iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

    iTunes error update

    I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

    "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

    I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

    I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

    Can anyone help?

    Thank you

    The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

    Ask the question in the Apple Forums:
    https://discussions.Apple.com/index.jspa

  • Problems with iTunes re-Setup - "there is a problem with this Windows Installer package"

    I tried to re - install iTunes with the latest version because I had received an "error 7" message instead of iTunes. You had covered the steps to uninstall and reinstall iTunes by removing iTunes, Quicktime, and other applications on my computer. I had uninstalled iTunes and Quicktime, but when I tried to uninstall the Apple software update, I get the following error message:

    "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    How am I supposed to fix my problem with iTunes, so I can download music if I couldn't uninstall programs I need to uninstall? Can I try reinstalling iTunes at the moment? Please let me know what I can or can't do.

    Specific file names are mentioned in the error messages?

    Here is the standard advice for dealing with problems of installation of iTunes.  Because you are having trouble to uninstall one or more of these applications, you must use Windows Installer Cleanup mentioned below or Free Revo Uninstaller to uninstall applications difficult.

    Caution: Cleanup utility Windows Uninstaller has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility if you use it, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  An image full disc would be safer if you have this ability.

    If these steps do not help, ask for help in the Apple forum: https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions&tagSet=1234#/
    *****************************

    Have you tried completely removing all software related to iTunes and files, allowing you to perform a "clean installation" of iTunes? It comes to my technique proposed, taken from the article in Support of Apple HT1926.

    Go to control panel > Add/Remove programs
    Remove these applications:
    1 Apple Software Update
    2. Apple Mobile Device Support
    3 Hello
    4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
    5 iTunes
    6 QuickTime

    Open my computer > C: > Program Files
    Delete this files (if present)
    1 iPod
    2 iTunes
    3 QuickTime

    Empty your temp directory:
    Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

    If you don't see the local settings, enable hidden files:
    Tools > Folder Options > view tab
    Select Show Hidden Files & folder, and then click OK

    Once this file is empty, restart the computer

    Download & install the Windows Installer Cleanup utility:
    http://support.Microsoft.com/kb/290301/
    Launch the utility: start > programs > Windows Installer Clean Up
    Select one of the applications mentioned above and click on remove

    Restart the computer
    Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  • loading itunes - I have "a problem with this Windows Installer package"

    When I connect my iPhone to my computer, I get a message from iTunes saying:

    "The iphone is useless because it requires iTunes version 10.5 or later. Go to iTunes to download the latest version»

    When I'm on ITunes and try and download the latest version, it says

    "There is a problem with this Windows Installer package. A program required fo this installation to complete could not be run. Contact your supplier of staff or the package of support ".

    Hi CissyHardy,

    Follow these methods.

    Method 1: Uninstall and reinstall iTunes and check.

    http://support.Apple.com/kb/HT1925

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    If the problem persists, you can contact Apple support for more help and information.

    http://support.Apple.com/kb/HE57

  • "A problem with this Windows Installer package. "A program required for this install to complete could not be run" when you try to install iTunes

    Original title: problems during the installation of products on vista with error message that indicates:
    I need help ASAP please! I tried to install the new Itunes software and my Vista laptop just will not let me... any ideas.

    I have download the new iTunesSetup and click it to start the installation process and the process begins. After 2 minutes, the following message appears:

    "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

    I already did:

    • "To manage my computer' on automatic rather than manual
    • Guests of controls too and still no change
    This has been going on for about a week or two now, and I really need help.
    Any ideas or help would be appreciated.
    Thank you

    Hi once again, fortunately today I bring better news! As a result of a serious lack of assistance from Apple themselves, have no idea of "The Tech Guys" in the world PC and extremely unnecessary hours at Microsoft, I've sorted it me. In other words, the main problem with mine was the Apple Software Updater. Even with "Revo" I was unable to remove it. I decided to download "Windows Installer Clean Up" from there where I could find (it was also free!). I used it and immediately found, I could choose the Apple Software Updater and remove it with very little hassle in all. I proceed to download the new iTunes, and I'm a very happy Bunny! Thanks for nothing, Microsoft and Apple! Hope this helps - Dan

  • try to install microsoft applocale gives the error: "There is a problem with this Windows Installer package"

    Microsoft applocale

    I tried to install this microsoft applocale. But I can't install it successfully. It showed "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    What can I do to install microsoft applocale?

    Thank you.

    AppLocale can be installed on WIndows Server 2003 and Windows XP.

    See "Important notes" on http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=13209

  • Erroe Code 1720: There is a problem with this Windows Installer package. A script required for this intall could not be executed.

    I have Windows Vista with Service Pack 2 installed on my system.  I am trying to install a small program.  The installation process starts, but soon, I get the following error message: Error 1720: there is a problem with this Windows Installer package.  A script required for this intall to complete could not be run...  How can I solve this problem?

    Try the steps mentioned in the answers marked by kmlure and Imran Chand at the following link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1720-there-is-a-problem-with-this-windows/0b965fe8-2d16-498c-bb88-395911e13146

    If you have downloaded the program, you can try to download it again or check if there is a different place, you can download it since the file itself is not the problem.

  • Windows Vista home Premium 32 bit SP2: iTunes 10.1: there is a problem with this Windows Installer package. A program required for this install to complete could not be run.

    I worked on it for about 3 days now. It's driving me crazy. I tried everything I could find to try to solve this problem.

    When installing iTunes it stops and a box will then appear to me said "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support provider or package. "No error message or anything, that's all I get. When I hit the only button I can hit the OK button, it continues to install QuickTime. Sometimes, it will install the iTunes file and the shortcut, but the shortcut does never work and the iTunes file is always empty. I have download the installer directly from Apple.com and save to the desktop, a new copy after each test (just in case).

    Here is a list of what I've tried:

    Yes, I am the administrator of the computer with admin abilities, yes I checked run this program as an administrator. I also made sure to stop all this as possible could interfere with the instillation, including my anti virus and what not even before I tried a clean boot.

    Is there anything else I can try?

    ~ Thank you

    I don't know whether or not the original poster solved their problem.

    See if it works for you.

    Error 1719 Windows Installer Service inaccessible during the installation of the applications.
    http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

  • I get "Error 1720 - there is a problem with this Windows Installer package" when I try to install Verizon MIFI on my desktop

    Original title: Error 1720 - CustomForInUsePortersNo_UI_Upgrade...

    I am trying to install a Verizon MIFI on my desktop and am getting error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact... Following that is a CheckForInUsePortsNO_UI_Upgrade. and then a string of digits, letters and notes. I came here looking for the answer and what I found I have to access the internet from the desktop computer requiring the difficulty to obtain the fix. I need help including the patch and how to obtain the fix my laptop on my desk. Thank you very much for your advice. Robert

    Hi Robert,.
     
    I suggest that you do the following and check to see if they help.
     
    Step 1:
     
    Temporarily disable all security software and check if the problem persists.
     
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Step 2:
     
    If this does not work, try installing Windows Installer 4.5 from the link below and check if you are able to install Verizon MIFI.
     
    Windows Installer 4.5 is available
    http://support.Microsoft.com/default.aspx/KB/942288
     
    Step 3:
     
    Make the SFC scan on your machine to repair or recover system files.
     
    Step 4:
     
    Create a new user account and try to install Verizon MIFI.
     
    If none of the steps to help, please contact Verizon support .

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • There is a problem with this Windows Installer package.

    There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. I received this error when you try to install the software for a Scanner to deposit check fast Chase Bank.

    Hello

    I suggest you try the steps below and check if it helps:

    Step 1: Verify that the Windows Installer service is running or not

    Start the Windows Installer service.
    1. Click Start, type services.msc and press to enter.
    2. from the list of objects, double-click Windows Installer service.
    3. change the startup type to automatic and click on the Start button to start the service.
    4. click on apply and then click ok.

    Check whether the problem is resolved.

    Step 2: Unregister and register the Windows Setup program again

    1. click on Start Orb, in the search box of start, type MSIEXEC /Unregister. and then click OK.

    2. click on Start Orb, in the search box to start, type MSIEXEC/REGSERVER, and then click OK. After you run this command, the operation is complete.

    3. now try again to your installation.

    More information: How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    Hope this information is useful.

Maybe you are looking for

  • Skype and HS850 headset. Is this possible?

    I have a problem with the HS850 headset. Since my laptop (satellite M-55-S325) doesn't have the tooth blue, built in I use USB adapter "Belkin". He finds the device, warns me that it is connected but unfortunately when I launch Skype, I do not hear t

  • update my PC for windows 8

    I had an ideapad z570 win 7. I want to use win 8 now, I want to erase the data from partition hiding, I want to change the data in the hidden partition such that, if a key is used subsequently, it installs win 8. do not suggest your visit to the leno

  • OpenManage Essentials "Devices" tab missing

    Hello I have installed OpenManage Essentials of this year beginning. He worked a much brought us good value. Now about three weeks ago the tab "devices"in the web application under the menu "Manage" suddenly disappeared. I can still search for device

  • Smartphones blackBerry ok plese help me!

    There are, I don't know what I thought, but I deleted my BB Messenger.  I lost my list of phone, but the phone actually display my numbers at times.  I went and everything reinstalled (after I saved the info), but now when I go to restore on my Offic

  • Expose as statements of rest pipeline option "Usupported media Type' OSB-380000"

    12.1.3 JDEVSOA SUITE 12.1.3I have a proxy work SOAP, the pipeline business.  I click with the right button on the pipeline and choose the option 'expose' that remains magical.  Although the help doc seems to suggest that I can expose a proxy like the