Why is-Visa Interactive Control unable to find or load the visa library

Similar Questions

• Error ERR-1002 unable to find item for the 'ID' element ID in the application

  Hello world
  
  I'm new to APEX and I came across this error for the first time. I have a page with a classic report in it, and I want to create a link to one of the columns in the report (column ID) to another page with a classic report in it. So when I click on, say, ID 118, I want to be sent to another page and don't see ID 118 information.
  After you create the link in the column, I get the error message when I run the application:
  
  Error ERR-1002 unable to find item for the 'ID' element ID in the application
  
  I tried to create a link from one report to the other before and it worked fine.
  
  Thank you!
  
  P.S. I use APEX 3.2

  Then you must create an item called ID on your page 2 (hidden make) and the link will pass the value of the ID of the line picked up on this hidden item. Now in page 2 make your report filter query on id = P2_ID or another name that you use...

  Hope this helps,
  His

• Error message "unable to load the shared library.

  I try to get my programs for school to work, and I get these error message whenever I try to run anything. The last line of the State of deployment is as follows:

  Deployment time get NLVSim and isAcceptedStep.vi IsAcceptedStep.vi and NILVSim get busy with errors on the target and has been closed.

  LabVIEW: Unable to load the shared library NILVSim.*: SIM_GetTimeAndIsAccepted:C. make sure the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  I tried everything I can think of to fix this. I checked NEITHER Max and I'm all for date on the software. I reinstalled LabVIEW twice, and I reset my myRIO. My classmates do not experience problems with getting theres to work. I start to lose hope and hope someone might know what the question. Thank you for your help.

  WubaDee,

  NILVSim is part of the LV Control Design and Simulation Module. This one is correctly installed on your Windows development system and you installed it on your myRIO?

  Norbert

• Unable to load the shared library LVASPT_WA.*

  Hello

  I have a hope that easy to fix the error: I want to use the function "WA Detrend' to the signal processing tool advanced in a real-time application running on a cRio 9030. When I try to run the VI I get the following error:

  ...

  Deployment NI_AdvSigProcWA.lvlib:WA decimation Filter.vi

  NI_AdvSigProcWA.lvlib:WA decimation Filter.vi loaded with errors on the target and was closed.
  LabVIEW: Unable to load the shared library LVASPT_WA.*ptDecimationFilterH:C. make sure that the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  ...

  I reinstalled signals Advanced processing toolkit and linked things 'add new software' MAX, but the error persists.

  A picture of what the system looks like to the MAX is attached.

  Also, I Fund this post:

  http://forums.NI.com/T5/LabVIEW/problem-error-deploying-item-on-RT/m-p/3201345/highlight/true#M92822...

  could someone tell me what he means by "Please check the installation of the custom software all mode '?

  Can you telll me what I am doing wrong?

  Thank you very much in advance!

  I ran your situation in R & D, and the problem seems to be as a result of Advanced Signal Processing Toolkit is not not compatible on the x 64 under Linux RT OS in the 9030.  The product page could be clearer on this gap.  I am currently a web application to get this fixed!

  Best,

  David

• Unable to load the shared library nilvce.*

  When you try to deploy a Labview 2009 real-time application, I get the message:

  Deployment XDNodeRunTimeDep.lvlib:loadnilvce.viXDNodeRunTimeDep.lvlib:loadnilvce.vi loaded with errors on the target and was closed.

  LabVIEW: Unable to load the shared library nilvce. *: niLVCtrlEngineReserveProc:C on the target RT device.
  Completed with errors of deployment

  I reformatted the CRIO-9073 and reinstalled the software, but this did not help.

  Any ideas on how to solve this problem?

  I was able to solve this problem by changing the settings in a timed loop Structure.

  The Source Type has been set to "synchronize in the scan engine.  This change to the problem solved 1 kHz clock source.

  This vi was initially written for the interface of the scan engine and reused on another project that uses the FPGA interface.

• Cannot find or load the class main oracle.spatial.util.SampleShapefileToJGeomFeature?

  Hello

  Am getting error below when ESRI shapefile running in the oracle database table.,.

  C:\ > java - cp G:\app\product\11.2.0\dbhome_1\jdbc\lib\ojdbc14.jar; G:\app\product\

  11.2.0\dbhome_1\md\jlib\sdoutl-1.0.jar;\g:\app\product\11.2.0\dbhome_1\md\jlib\s

  doapi - 1.0.jar oracle.spatial.util.SampleShapefileToJGeomFeature localhost h Pei

  Forms - sn of 1521 orcl u MDSYS selva d t f F:\saptial\Africa.shp - r 8307 - g ge

  ometry

  Error: Could not find or load the class main oracle.spatial.util.SampleShapefileToJGeomFeature

  Uses the java version

  C:\ > java-version

  Java version "1.7.0_51".

  Java (TM) SE Runtime Environment (build 1.7.0_51 - b13)

  The Client Java VM (build 24.51 - b03, mixed mode, sharing)

  And also tried in MapBuilder sound fine work., but I need to import java utility assistance help me too this.,.

  I tried below in this way and solved problem.,.

  Until I downloaded

  sdoutl - 11.2.0.jar and sdoapi - 11.2.0.jar used to import a shp file...

  C:\>set ORACLE_HOME=G:\app\product\11.2.0\dbhome_1

  C:\Users\SELVA>CD downloads

  C:\Users\SELVA\Downloads>CD statplanet_zambia

  Card C:\Users\SELVA\Downloads\StatPlanet_Zambia>CD

  located in a particular way and my oracle home

  C:\Users\SELVA\Downloads\StatPlanet_Zambia\map>set ORACLE_HOME=G:\app\product\11.2.0\dbhome_1

  C:\Users\SELVA\Downloads\StatPlanet_Zambia\map>java - classpath %ORACLE_HOME%\jdb

  c\lib\ojdbc5.jar;%O RACLE_HOME%\md\jlib\sdoutl-11.2.0.jar;%O RACLE_HOME%\md\jlib\sdoapi-11.2.0.jar oracle.spatial.util.SampleShapefileToJGeomFeature h localhost Pei 1521 - orcl u MDSYS selva t Zambia SF map geometry 8307 d - g - r

  Host: localhost

  Port: 1521

  SID: orcl

  db_username: MDSYS

  DB_PASSWORD: selva

  db_tablename: Zambia

  shapefile_name: map

  SRID: 8307

  db_geometry_column: geometry

  Connection using Oracle10g...

  localhost, 1521, orcl, MDSYS, selva, Zambia, map, null, 8307

  Old table of fall...

  java.sql.SQLException: ORA-00942: table or view does not exist

  Creating a new table...

  9 response (s) converted.

  Fact.

  Thank you

  Selva

• BlackBerry Z10 unable to find contacts in the Contact application

  Hello

  I have been using BlackBerry Z10 for a year. I was very satisfied with the performance of the device. I am indeed! but do not know what happening sudenly I'm unable to find any contact which is already available in the contacts app (NOTE: I do not use 3rd party app to store my contacts)

  Software version: version of the OS installed is BB 10 OS 10.3.1.1779

  This is the setting I made on my device:

  Automatically merge Contcts - WE

  Sort contacts by name

  View the contact as -firstly, the last

  Show the accounts in the list of contacts:

  BBM contacts

  BBM contacts video

  LinkedIn

  Facebook

  Twitter

  Outlook.com

  Contacts from the SIM card

  BBLink

  Search using cloud is UNCHECKED.

  Please do the needful.

  Thank you

  Nishant

  Wait... you mean you installed an update of the OS? And after that, this behavior started? If Yes, then the most common thing to do after an update which translates questions is to perform a reload of the OS. Sometimes the update process have errors and others... with a reload often cure the problems.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Good luck!

• Impossible to download and install Adobe Flash Player. The program says that it installed successfully but unable to find it on the computer

  Original title: I downloaed and installed Adobe Flash Player but can not find

  I need Adobe Flash Player 9.0.125 in order to read a perticular website. I downloaded and installed the latest version of Flash Player. The program said I installed successfully, but I away find it on my computer and the site always told I need. What did I do wrong?

  Hey Papi Williams,

  Welcome to the Microsoft Community Forum.

  From the description of the problem, it seems that you are unable to download and install the latest version of Adobe flash player on your computer. I understand the inconvenience.

  1. What version of Adobe flash player you have downloaded?
  2. What Web browser are you using to view the website?
  3. Which site did you download Adobe Flash Player?

  Let us try the following steps and check if it helps to solve the problem.

  You can read this article and check if the Flash Player is installed correctly on the computer.

  Flash Player help / find the version

  http://helpx.Adobe.com/Flash-Player/KB/find-version-Flash-Player.html

  The latest version of Adobe Flash Player is Adobe Flash Player 11.5.502.135 and you can download it from Adobe's official website: http://get.adobe.com/flashplayer/. If you have a lower version of adobe flash player installed on your computer, try the following steps to uninstall and reinstall the latest version.

   

  Method 1: first of all, use this utility to uninstall the existing flash player http://kb2.Adobe.com/CPS/141/tn_14157.html

   

  Method 2: Reinstall Adobe Flash Player
  Once you have uninstalled properly, and then try to install it from the following link. The latest version of Adobe Flash Player is Adobe Flash Player 11.5.502.135 and you can download it from Adobe's official website: http://get.adobe.com/flashplayer/

  You can also see the link listed here for Flash Player, games, video or audio does not work in Windows questions.
  http://kb2.Adobe.com/CPS/837/cpsid_83715.html

  I hope that helps! For any help about Windows, you can still post on the Microsoft Community Forum.

• Unable to find or create the font...

  I'm having some trouble with a computer running Adobe Acrobat X standard, 10.1.2. The computer is running Windows 7 64 bit.

  When opening PDF files on the web, the computer gives the error "cannot find or create the 'ArielMT' font. Some characters may not display or print correctly. Occasionally, I get the error with TimesNewRomanPS-ItalicMT as well. I also have the a popup saying "A design error has occurred." I checked that the font in question is installed on the PC. I also checked that the police is also embedded in the PDF file. The error does not occur on other systems with the same version of the OS and the version of Acrobat, so I know it's not the PDF that I consult. I tried to repair the installation of acrobat, and uncheck the "Use local fonts" option, but none of these things gets rid of the error.

  The computer has been upgraded to Internet Explorer 9 and Acrobat X has been installed at the same time, and the issue has been happenning since.

  Any suggestions are appreciated!

  I determined that the problem was caused by the user with their Windows font size setting set at 150%. I was able to reproduce the problem on another system under these conditions.

  Thanks for your suggestions.

• After buying a new printer Windows Vista is unable to find it on the network.

  original title: adding Vista network printer

  I am running Windows Vista on my laptop and connect to a network home wireless. I replaced my old printer (which I could access the network) with a new one. I tried adding a printer (using the guests) but Vista could not find the printer. I can use Explorer via the wireless network, but it still can't find the printer. What I am doing wrong?

  Dave!

  Hi Dave,.

  1. You receive an error message when you add the printer?
  2. What is the number and model of the printer?
  3. You have security software installed on the computer?

  Try the following steps to add the network printer on the computer.

  (a) printers open by clicking Start , clicking Control Panel, hardware and soundand then click Printers.

  (b) click on Add a printer.

  (c) in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.

  (d) in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.

  (e) If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) complete the additional steps in the wizard and then click Finish.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• I'm unable to find some of the panels in Dreamweaver, can anyone help?

  We seem to run out of signs in our version of CS6 schools. Is there a way to get this back?

  I'm sorry to say CS6 panels are not the same as those described in many creative cloud tutorials.  This disturbs many people.  What version and build # DW don't you have?  It's under help > about Dreamweaver.

  Nancy O.

• Unable to find layout in the section of the insert.

  Hi, I have donwloaded version track Dreamweaver cs6 and it not a not the section layout to draw an AP Div, can anyone help please?

  You probably have DW CC and not CS6 - two different products.

  APDivs have been removed from Dreamweaver CC because they were never intended to be used as main page layout tool.   The people who have them use invariably had problems with the way their pages rendered on multiple devices.  Fortunately, Adobe has finally decided to remove the new structure of the APDivs Panel.

  Nancy O.

• Why run and run on my MAC without ever loading the last firefox update

  I have download a message saying Firefox update. I touched the entrance and runs the update of Firefox, the last time I tried, I went to another page to continue working and updating has been running for more than 30 minutes. The about Firefox page displays number 33

  Hello, Norrsken, please try to download and install firefox. Perform the following steps:

  1. download a copy of the latest http://www.mozilla.org/en-US/firefox/all.html firefox (full installer)

  2. Trash , install the current application of Firefox to do a cleaning.

  3. install the version you downloaded.

  Do not select to delete your personal data, your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.

  See also: Installation of Firefox on Mac

  Thank you

• Find and load the predefined tools - puzzled

  Hi all

  I am trying to add a symbol of 'copyright' to a layer using the predefined custom form I know there * somewhere *.

  When I click on the Amoeba Custom Shape icon in the top bar, my choices are the Starburst or sewn Patchwork color target.

  AHA! I say (prematurely) blissfully - I'll go to the low speed which gives me the menu drop-down & replace, with the set that contains the copyright symbol.

  So I go to this menu and see 'Aero '.... "Brushes of artists... etc" and none who have custom shapes.  On Plan B.

  I try «Load tool Presets...» "and I'm in my Photoshop CC directory / Presets / custom... Forms and it is empty. Therefore any pre-selection documents.  Weird, I think, because I loaded the layer and brush presets before. So maybe this directory is for games that I create myself?  Not a clue.

  So I try the preset manager and see if clicking on the form of copyright and by dragging on my page will work... No, he draws an arrow shape.  It's full of hope, because the arrow was one set of presets, even if it wasn't the one I tried (many times) to select. Yay - I'm one of the suction cups.  Boo - I can't one I want.

  I'm puzzled.  Beat.

  How to load the custom shape set that includes arrows, Copyright, trademark, etc. ?  I'm about to cry with frustration!

  Hello

  What operating system do you use?

  With the custom shape tool selected, you should see the word form in the options toolbar.

  Click on the box just to the right to see where you can take different forms.

  If you want to change the settings click on the gear icon bit and select one from the bottom of the list.

  In your case, the copyright symbol is in the default and symbols form presets

  

• Unable to save symbol in the shared library?

  Hello
  I'm trying to follow the tutorial 'rapid prototyping '. I'm supposed to save a subol personalized to the common library, but when I create the box "save to common library" is not highlighted and can't be selected. When I look at the common library from the side panel there is also no record 'Custom symbols.

  Any ideas? I this is my first time using Fireworks, I need to create models of an assignment, and it is due in two days! Laughing out loud

  Thanks in advance

  Oh, I'm with Cs5 and Windows7

  Hey,.

  When you select the option convert to symbol, you can see two check boxes with a th being Save to common library options.

  You can follow the following steps:

  1. create a rectangle. (or design who have your willl symbol.)

  2. click on modify > symbol > convert to symbol, or do a right click Convert to symbol or press F8 to convert the rectangle to a symbol.

  3. in convert it to Symbol dialog, check the option "save to Common Library."

  4. you will get a save the Symbol dialog box. It is saved in the default custom symbols.

  The common library panel will be updated and you can see it in the "Custom symbols" section inside the common library.

  Priyanka.