Why my 5G wireless network have low download speeds?

Similar Questions

• N300 Wireless Router WNR2000v4 slow download speeds

  Hello

  I have Time Warner Cable and pay for 50mps download speed. When it is connected directly to the Modem I get better than 50mps download. When I run through the router wireless using wireless or wired connections download speed slows down slot 10mps. Please guide me on how I can change that. These tests of the mine where done with only 1 x computer on the network.

  Bob

  Hi @cssva3 you have the latest firmware installed on your router?

  If this is not the case, see this link on how to upgrade the firmware.

  After the update of the firmware, reset the router by pressing the reset for 20 seconds button.

  Once done, reconfigure the router to get Internet connection.

• Network problems? Download speeds low, even when the wired?

  Hello

  Recently, I upgraded my router to a router from Verizon to have a connection to 75/75.

  However, even when plugged in, my download speed reaches a maximum of 10. However, when you use other laptops, their speeds reach up to 40 or 50 close.

  Here are my specs.

  Operating system
  8.1 Windows 64-bit
  CENTRAL PROCESSING UNIT
  Intel Core i7 to 2.90 GHz 45 ° C
  HASWELL 22nm technology
  RAM
  16.0 GB Dual-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  Alienware 01W2J2 (U3E1)
  Graphics
  Monitor generic PnP (1920x1080@60Hz)
  4096MB ATI AMD Radeon R9 M290X (Dell) 56 ° c.
  4096MB ATI AMD Radeon R9 M290X (Dell) 70 ° C
  Disabled crossFire
  Storage
  WD10JPVX-75JC3T 931 GB (RAID)
  10GB SSDMCEAW080A4 m (RAID)
  Optical drives
  HL-DT-ST DVDRWBD CA40N
  Audio
  Realtek High Definition Audio

  What's wrong?

  What Alienware do you have?

  Some Broadcom drivers have a weird 'green' setting that holds the speed to 10. Check your driver settings (or clean-install a better). In addition, use cables Cat 5e or better and all ports should be 10/100 or gigabit.

• Low download speeds Internet Sophos UTM VM - but only the other virtual machines; Physical PC without issue

  So I have something very strange going on. I have a Dell custom host ISO on a Dell R310 ESX 5.5. My problem is that the Internet download is bad, but ONLY to other virtual machines. The Upload is normal physical computers.

  I currently have 4 virtual machines running:

  FreePBX, Win 2012 R2 Server, Sophos UTM (ISO VMware with the latest updates) and Win8.1 Ent.

  I have the following physical machines, I also used for testing:

  8.1 Win Office - wired

  Win portable 8.1 - wireless

  The lower test details, you can see on the image below.

  Iperf tests with 64 k window:
  Win Server 2012 to VM VM win 8 - 6.8Gbps <-VM VM good xfer
  Wireless Win 8.1 laptop to Win 2012 VM Server - 172Mbps <-VM to the well physical wireless
  Desktop 8.1 Win Win Server 2012 VM-619Mbps <-well wired VM
  
  Xfinity speed tests:
  Wireless laptop: 90Mbps down, 9Mbps place <-physical good Upload PC speed
  Wired Desktop laptop: 90Mbps down, 9Mbps place <-physical good Upload PC speed
  Win Server VM: 86Mbps down, place 0.6Mbps <-SLOW on VM!
  Win 8 VM: 90Mbps downwards, upwards 0.6Mbps <-SLOW on VM!
  
  As you can see in my tests, the only place the problem presented is VM to the internet. Physics to the internet works fine. My only thought is that there is something with the switch to the host or the MAC address.

  
  

  I don't think it's the Sophos Nic because it works very well from the physical to Sophos to Internet. I also have a ticket with Sophos Support; they look on the side of Sophos.
  

  Thoughts?

  

  I sent Wireshark packet capture of the Sophos support and they had this to say:

  This is to inform you of the issue, you face the slow, ask you please see attached screenshot of the capture of packets. We have found the package wth ECN (explicit congestion Notification) and CWR (Congestion window reduced on the VM machine, please get this checked with support of virtual machine or VM adapter. This happens when he fell over packages and the congestion window is reduced, that the issue is not with the UTM.

  In addition, indicator of Congestion window reduced (CWR) is defined by the host sender to indicate that it has received a segment TCP with the ECE flag set and that she had responded to the congestion control mechanism that indicates there is a congestion in the patch.

  So I did some research and the solution is to disable all options of unloading in the advanced settings of the NIC as shown in these two links:

  Cyber Explorer: Improved VM broadband network VM on an ESXi platform

  Disable offloading TCP in Windows Server 2012 | Knowledge Center | Rackspace Hosting

  This solved my problems. I now cross 9Mbps downloads on my VMs. hope this helps someone else!

• LRT224 and WAP801N of TP - Link point of access - low download speed

  I just installed a LRT224 for the use of two ISP connections, one is a modem connection cable with 75 Mbit/s and the other a connection ADSL 4 Mbit/s in download. It is reserved for the failover.

  For the WLAN access point, I use a WA801N of TP-link v2 with the latest firmware.

  When I connect this access point WA801N directly to the cable modem, I get about 75 Mbps of download speed.

  What is the case, when I use a LAN cable to connect to the LRT224, which includes 75 Mbps.

  But when I connect the WA801n to one of the LRT224 LAN ports, the download speed drops to about 10 Mbps.

  The LRT224 is configured to function as a DHCP server for my LAN, all devices get their IP by DHCP to the 192.168.2.x row address. The main WAN connection is configured to use addresses 192.168.0.x, the other WAN connection to use 192.168.1.x.

  Everyone knows about similar problems using a WIFI (b/g/n) access point?

  Thanks for any help.

  Okay, I think that the question is the access point.

• Why is my slower than wifi ethernet download speed when using the airport extreme?

  Hi all

  This is my first post here, so please bear with me. I currently own stunted 2011 Macbook Pro 13 inch and an extreme A1521 from the airport. My ISP has promised 50Mbps downloading and sending 10 Mbps. When I connect my MPro via ethernet/wi-fi to my modem I get as promised. When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok. However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps. Anyone know how to fix this?

  If you check the 'fine print', your ISP has promised "up to" 50 Mbit/s and 'up to' 10Mbps.  The ISP might provide more than that during periods of slow activity, like the days of the week during the day, but much less during evenings when there are many more users on the Internet.

  When I connect my MPro via ethernet/wi-fi to my modem I get as promised

  I assume that you meant to check the Ethernet connection, you disable WiFi on Mac when you do this. And unplug the Ethernet cable when you check the speed of the WiFi, correct?

  If so, this tells you that the Ethernet port to both the modem and the Mac work properly, and WiFi work correctly as well.

  When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok.

  If this tells you that the Ethernet connection between the modem and the AirPort Extreme works correctly, and wireless works fine on the AirPort Extreme.

  However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps.

  Well, you know that the Ethernet connection between the modem and AirPort Extreme works because you can register 48 Mbps Wireless.

  Thus, the possibilities are narrowed to two elements at this stage:

  (1) the Ethernet cable is defective or making intermittent contact. Try another Ethernet cable, to ensure.

  (2) If you have turned off AirPort Extreme and rebooted several times, and you know that the cable between the Mac and AirPort Extreme works properly, then you have reduced the question down to the Ethernet on the AirPort Extreme, which is probably defective switch.

  If you have not already done so, try other ports Ethernet on the AirPort Extreme.

  As a last resort, perform a reset material on AirPort Extreme and put up again. To perform the Hard Reset... power on AirPort Extreme for a few minutes, then hold it pushed in the reset button on the back of the unit (near the AC power plug) for 7-8 seconds and release. Allow a minute for the AirPort Extreme restart orange light flashing slow.

  I once went through two consecutive airport extremes with the same question about 8 months ago, so it can happen.

  If you're still having problems, then it is time to take the AirPort Extreme of Apple Store... If you have one near you... or contact the Apple Support directly by clicking on 'Contact the Support' in the upper right area of this web page.

  Good luck!

• Why my do ISP not able to download speed of over 35 kbs increae unlimited if scheam

  my ISP bharat sanchar nigm ltd (BSNL), INDIA (KOLKATA CITY)

  scheam 900ul

  connection is more than seven years

  Hi Chase,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that BSNL does not increase the speed of download, even if you are on an unlimited plan.

  I suggest you to contact the Support of BSNL to improve assistance in this regard.

  You can also check out the links and check if it helps.

  How to increase the speed of navigation: 7 ways to work faster on slow connections

  Why is my Internet connection so slow?

   

  If you have any questions on Windows, feel free to let us know. We will be happy to help you.

• My wireless laptop have double the speed of the internet than my Wired desktop pc

  I just bought the Linksys E2000 and configure properly with a single office (wired connection), adapter of a phone (wired connection) and two laptops (both connected wireless).  Everything works very well - the phone works and all computers can access the internet.  However, every one of my laptops get a speed of 25 to 30 Mbps but my office (which even once, is connected by ethernet cable to the router) is only to get a speed of less than 15 Mbps.  That's nearly half the speed of laptop computers.  When the office is directly connected to the modem, it gets the same speed than laptops, about 25-30 Mbps.  If the router is somehow reducing the speed of the internet from my office by about 50%.  If a wired connection still should not be faster than a wireless?

  I chat and talked with Linksys on 5 customer support representatives, tried all the settings, they have suggested, re-installed the software, but none of them could find an answer.  One of them acknowledged that this is not normal and suggested a return to the store and return the router to another.  I'm not changing it and exactly the same thing is happening then it is probably not a hardware problem.  It is a setting that needs to be configured or this router simply gives slower speeds for wired devices.  I hope it's something that I can configure.  Can anyone suggest anything?  Everyone knows this?

  I just bought the Linksys router E4200 today (the new router Linksys from this date).  I tested it on my computers without changing anything (except of course re - install the new CD of Cisco Connect).  This time, my office is at normal speed (25-30 Mbps) and my laptops were still a bit faster than before.  It's certainly better that way.  It was certainly the router, something in the E2000 was slowing down the wired connection to my office at 50% of what it was supposed to be.

  Note that I could have lived with the reduction in speed in my office who was originally the E2000.  15 Mbps is always suitable speed for most of the tasks of the internet.  I understand that it is a long-term feature that I use for many years.  So, I would prefer that there are no glitches at first.  My router Linksys previous lasted me 10 years and could still running even longer.  Its technology of 2001 all new computers support I have had over the years and also a VoIP phone adapter and served fine as a mobile Wi - Fi Blackberry and Droid hotspot.  So I'm looking forward to using it again for just as long if all goes well.

  Moreover, the E4200 was not easy to find.  From this date, Amazon.com and Bestbuy.com do it have yet because it's so new.  Electronic no Fry did.  I got the chance to find it in a Best Buy store without an appointment.  No other Best Buy store that was in my area, this alone (maybe they are the first in my area).  I paid $149 plus tax (compared to $69 more taxes for the E2000).  After reading all the comments on this subject and my own experience, for me, it is definitely worth paying the extra for it.

• Acer Aspire 5315 drivers for wireless network does not

  This unit had top win7 and everything worked well. I reloaded Vista back and updated, all the drivers have shown as installed except for the wireless network, so I downloaded all the drivers of 3 of the website of Acer wireless network. Only the Atheros installed but still does not work, for the Atheros device ID is:
  PCI\VEN_168C & DEV_001C & SUBSYS_04281468 & REV_01

  The wired network connection works fine, but with the wireless, the pc icon double in the tray system, but not with the 'flowers' shows as when I connect the wired ethernet cable. The difference between when win7 was on this unit is as well the wireless connection and the dvd that worked perfect but now after reloading Vista, the Wireless does not work and the dvd also does not show as well, I had to install codecs to show him all. It's not logical, why win7 would work to perfection and not the vista which was what this unit came with?

  It's ok, I found the driver here:

  https://www.Atheros.cz/Atheros-wireless-download.php?chipset=22&system=3

  Thanks for your help.

• I don't know what wireless network card driver to install for Satellite A200

  Hello

  Im trying to install the adapter wireless by Satellite A200 (PSAE0E) and can not make it work.
  The website offers different drivers and says that I have to click on "How to identify my wireless network card driver", but that the document does not exist.

  Can anyone help?

  Thank you

  According to the specifications of the laptop your Satellite has Atheros AR5006EX wireless network adapter.
  Download from http://aps2.toshiba-tro.de/wlan/

  Just choose the right operating system.

• In loose wireless network connection once the last update of definition for Windows Defender - KB915597 is installed.

  Hello.
  The problem I've been is that I lose my network connection to my wireless network when windows downloads and installs the latest update of Windows Defender (definition 1.55.1119.0).
  It can detect the network and others nearby, but cannot and does not connect to my network.
  The only way I can solve the problem is to do a system restore to an hour before the update was installed and disable automatic updates.

  I have a HP Pavilion dv9000 running Windows Vista Home Premium.

  Thanks for any help.

  HELLO MICK. J

  Did you check the setting on you, defender of the window or the firewall settings? These things will be pervent you to connect some time. I suggest that you try disabling Windows Defender and try to connect to the internet. Useful to try link: http://support.microsoft.com/kb/918355

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Cannot install the driver for DV6-6c11nr wireless network

  OK, I've been on this thing for the last hours 8 tries to install the driver for wireless network.  I downloaded all the drivers from the HP website and whenever I try to install the downloaded file, it opens, then closes without installing.  I can't say I'm surprised because I've always had problems with the HP drivers, but this one is by far the worst.  Bluetooth driver also did the same thing and miss me the bus sm with usb driver that is not listed on the site.  I went to the website of ralink unsuccessfully.  I have a new install of windows 7 ultimate with all windows updates installed.  Any help would be greatly appreciated.

  Hello

  Download and install:

  • Graphics driver AMD from here.
  • Realtek Wlan driver here
  • Here validity fingerrint sensor driver
  • AMD USB 3.0 driver from here

  If you will ask you to restart the system after you install a driver, please do it before you install the other.

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• BlackBerry Smartphones download speed!

  Hi guys

  I have a bb 9360 and now have a problem! I want to download a lot! Now if I turn my BIS each month I can only download at full speed for 4 or 5 days, then the download speed are low! I tried to contact my service provider, but they told me that my phone may need a software update, but the software of my phone is at most later version witch is Os 7.1! Help, please

  Hello Abrie71

  I don't know why your operator said it, but the download speed is certainly depends on our carrier network. This is our carrier server through these streams of data packets to our device. I don't think, and I don't know that it is not a software but the problem within your corporate network.

  But I noticed some user reported the same problem all over the world, some carriers restrict the download speed on BIS. Then, you should contact your carrier for more information on this subject.

• Download speed very slow download El Capitan 10.11.2

  I have a download speed normal fiber of 5-6Mbytes persec. When you try to download the latest updates, I get a download speed, measured in bytes per second, or until about 7Kbytes per second. I suspect a problem to Apple Server, but I can't solve this problem through Apple support. Does anyone else have this problem?

  Try to run the update from the drop-down list. Download different.

  10.11.2 combo update