Why my all-in-one printer HP Photosmart 4780 now only print all other lines of the document

Similar Questions

• hp4630 print all other lines only

  I've just set up my hp4630 and the test page prints fine, but when printing email, WP, Word or Excel, I get all other lines printed.

  I am running Windows 7 (64-bit) and have installed the latest driver from HP and run the program "Challenge", which says that everything is working properly.

  Thank you for your help. Very frustrating!

  After 5 hours trying different spending fixed, uninstall/reinstall, etc., I decided to go buy a new printer cartridges, even if those who came with my new printer have been marked Oct 2015. Of course, things work fine now.

  Thank you very much HP to put cartridges of shit with a new printer and for the big waste of my time and money.

• Cannot print the printer is off line with 14 documents pending.

  Original title: Printing print HPrinter
  My printer is off line with 14 documents pending.  How can I get it online and cancel pending documents.

  Hi Helen,

  I understand that your printer is off line and there are 14 documents waiting in the queue.

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Method 1: Run the printer Troubleshooter and check.

  a. open the printer Troubleshooter by sliding in the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the Troubleshooting in the search box, by typing or clicking on settings and then type or click on find and fix problems. Under hardware and sound, click use a printer.

  b. follow the steps in the resolution of the problems.

  If the method above does not work, proceed to the next method.

  Method 2: Disable the documents waiting in the queue, check the following suggestions.

  a. the key press Windows + R and type services.msc in the search field and press to enter.

  b. the Services listed, stop the print spooler service.
  (c) in Windows Explorer, navigate to the folder below and open the PRINTERS.
  C:\Windows\system32\spool\PRINTERS
  d. click on continue or Yes (if prompted by UAC) to approve the opening of the PRINTERS folder.
  e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer.
  Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content.
  f. open Services, and then start the print spooler service.

  Also see suggestions from the following link:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  After completing the methods suggested above, answer us with the State of the question.

• Host cannot communicate with all other nodes in the cluster virtual SAN allowed

  I get this error after you apply the latest patch:- http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2135115

  So all the hosts are now review: VMware ESXi, 6.0.0 3380124

  After the reboot, I get the error message on the host cannot communicate with all other nodes in the cluster active virtual san...

  However, the VSAN health check is green, 'get esxcli vsan cluster' shows all 6 members of the cluster ok... and if I reboot a crowd happens ok without the error... so if I reboot another host, it will come without the error... but then the host on which I rebooted before it displayed the error...?  So I can't ever get more than 1 host without the error after a reboot.

  I checked multicast that removes ok, in fact all of the checks in contradiction with the fact that why I get this error...

  Someone at - it ideas? Could this be the latest patch...

  Paul...

  Hello, this has been repeated here: 6.0 U1b - hosts cannot communicate thanks, Zach.

• AF:table restore copy the current line in all other lines

  I used Jdeveloper to creeate a table to a data control. Then I added a Cancel button. When I choose the restoration, entity objects are cancelled, but the content of the current line is copied to all other lines. Why is this happening?

  Check [url http://adfbugs.blogspot.com/2011/05/jdeveloper-11115-serius-bug.html] Jdeveloper 11.1.1.5 severe bug (fixed in 11.1.2)

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• document feeder prints a black line down the Middle

  document feeder prints a black line in the middle of the page

  Yes, the warranty is still valid! I bought the extended warranty for the replacement. So I guess I will contact HP for a new printer.

  Thank you very much for your help!

  Ted

• I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened.

  Add/Remove programs. I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened. Any ideas? Thank you.

  original title: Add/Remove programs.

  Hi, Tay 13,

  Open command prompt window

  type the following command

  SFC/scannow

  Press enter

  Note: There is a space between SFC and / scannow

  Once the scan is complete, look for the journal by clicking Start > run

  Type

  %windir%\Logs\CBS

  Search for repaired files or cannot repair file and note the name of any file not repaired.

  New attempt to open Control Panel Add/Remove section.

  Open the command prompt window

  Type the following command

  appwiz.cpl

  Press enter

  This will open Add/Remove programs

• A document I had previously recorded on my flash drive. All of a sudden the paragraph symbol appeared at the beginning of each line in the document and in documents on flash drive

  Original title: Word 2003 Documents

  I was working on a document I had previously recorded on my flash drive.  All of a sudden the paragraph symbol appeared at the beginning of each line in the document and all documents on the flash drive.  In addition, it appears on every document in the my documents folder.

  Can anyone help?

  Google search:

  How do I turn off paragraph symbol in Word 2003

  "You should have a paragraph symbol button in the bar... click on this tool and formatting symbols will disappear."

• Error "host cannot communicate with all other nodes in the cluster of enabeld VSAN.

  Hello community,

  We have a problem (?).

  We have a cluster VSAN enabled with four hosts. Everything seems perfect,

  -the configuration is good,

  -Displays the page state VSAN "network status: (green arrow) Normal."

  -Displays the disk management page "status: healthy" for all of our groups of disks.

  -Same 'esxcli vsan cluster get"on each host returns a 'HEALTHY '.

  But we have a yellow exclamation littly on each host 'host cannot communicate with all other nodes in the cluster of enabeld VSAN.

  Anyone with the same problem? Anyone with an idea or a hint?

  Thank you!

  Update vcenter to the latest version and the error disappears. Problem solved! The 'old' version of vcenter performed since September 2014, strange.

  Thank you very much for your help!

• My Wacom pen works with all other functions than the brush / pencil?

  My Wacom pen works with all other functions than the brush / pencil. He painted with the opposite end, the eraser to erase end? Does anyone have a suggestion what to do?

  Annette

  My husbond problem - I had somehow clicked away from the "normal" position Ooops!

• Photoshop CS5: Shots of the menu bar on cintiq 21ux I work with photoshop cs5 on a Wacom Cintiq 21 ux and it has always worked great. But all of a sudden the documents, I work in a wink from the above menu bar and I can't go back there. It covers only the

  Photoshop CS5: Shots of the menu bar on cintiq 21ux I work with photoshop cs5 on a Wacom Cintiq 21 ux and it has always worked great. But all of a sudden the documents, I work in a wink from the above menu bar and I can't go back there. It covers only 2/3 of the cintiq. I installed the drivers from the wacom and installed photoshop again, but the problem is not resolved. It's very frustrating because it is almost impossible to work this way. I hope you can help me. I have Yosemite on the iMac, and it worked correctly. The problem occurred suddenly. I reinstalled the driver for the Tablet and photoshop cs5, but it does not solve the issue. I have a multiple display set in place. All other applications work fine (corel painter, illustrator, indesign). It's almost as if there is an invisible magnetic line on the screen where align with the document and the other tabs in the workspace. Now, I bought and installed cs6 and the problem is still there. Can you give some advice? Is this a known issue? I don't know if it ' s a problem caused by Wacom, Photoshop or Apple. Help, please. Thank you.

  I suggest that you take a look at this thread and see if something is a help to you: problem window CS6 on Cintiq on OSX Yosemite

  Benjamin

• HP Photosmart e-all-in-one printer 6520, find or reset the PIN code to send scanned documents

  With regard to emailing documents scanned for laptop running Windows Vista 32 - bit, Home Premium edition

  HP Photosmart 6520 model of printer e-all-in-one, CX017-64001 FPU: find or reset the PIN code to send scanned documents

  I set my printer up to send a scan of documents for me whenever my laptop isn't on. It requires a code PIN to send the document. Unfortunately I misplaced the PIN code and is forced to locate or reset. Reflected on the printer to the title web services, I can't see an option to do this. I have also recorded in the centre of ePrint online but have been unable to locate or find a reset it either.

  Any ideas how to do this? Thank you

  Hi lime,

  The best way to access the app is actually access your ePrint account and add the scan for app by email to your printer.  Once you add the application to your printer go to your apps on the front panel and you should see the scanning to e-mail.  I hope this helps.

  Let me know how it goes.

  * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

• HP Photosmart C5280 All in One printer works is not after the installation of updates

  OP: Problems with my HP Pavilion connect with my HP Photosmart C5280 All in one. Allows to work properly and after running the update something happened.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello iwasbetterbutgotoverit,

  1. do you have an update of the hardware installed on your computer?

  2. what exactly happens when you try to print from the printer?

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This automatically diagnose and fix printing problems, installation of a printer, connecting to a network printer and other related errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  As it was working fine before installing the update, I suggest that you do a system restore on your computer.
  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can visit the link to the KB Article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can use the System Restore tool to undo the system restore if it does not help.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w