Why my computer off and reboot suddenly

Similar Questions

• Why my computer off and get blue screens

  Why my computer off and get blue screens once from time to time. My hard drive sounds like he works hard. I can hear it ticking sweet sounds when I start the computer, and it takes a while to calm down.

  Ron

  Hi Ron,

  I suggest you to follow the steps mentioned below and give us the blue screen error message.

  1. click on Start and then click on Panel.

  2. click system and Maintenance , and then click System.

  3. click on Advanced system settings.

  If you are prompted for an administrator password or a confirmation, type the password or click on allow.

  4. click on the tab Advanced and then click settings under Startup and recovery.

  5. to the failure of the system, click on to erase automatically restart checkbox.

  6. click OK and then click ok.

  7. try to reproduce the error.

  Reference:

  How to fix error Bluescreen (STOP) that causes Windows Vista to shut down or restart unexpectedly.

  http://support.Microsoft.com/kb/958233

• I have no idea where my installation for my operating system discs are... but I need to reinstall a dll that I had my computer off and when he returned to the top needed to fdisk... and when he fixed things that the dll has been corrupted.

  where can I download the dll for windows vista ultimate 64 msxml4.dll?

  I tried to get my installation discs and I can't find them. I tried to contact alienware and they said to contact microsoft.
  I tried to use the features of support, but when it asked me to put in my ID of product of your Web page will not accept for any reason any.

  now what should I do?

  can you send me this dll? my email is * address email is removed from the privacy *.
  I'm fucked without my darn install disks.

  You do not qualify for FREE Microsoft Support as your Vista operating system is preinstalled, with the exception of problems with Vista SP2. () Information about this is provided below.)
  
  All the support your Vista is the manufacturer of your computer.
  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Deskjet D1520 - when you try to print, the blue of my computer screens and reboots.

  Have a new computer running 64-bit Windows 8.  After the blue screen error message and reboot is a memory dump.  Have reloaded drivers and run HP diagnostics and windows.  Two diagnostics say everything of fine, but I still can't print.  Sometimes a half page will print until reboot, and sometimes there is nothing to print.

  Try a different USB port on the computer

• All my tabs and history are missing after my computer updated and rebooted. I had more than 140 tabs open! Help!

  Last night, my computer (Win 7 Dell Portable - Firefox) made an update. It restarted and when I turned it back on, the computer gave me a message that your office told 'prepare' before I could connect. When I logged in, it was almost as if the computer was brand new - the desktop theme was new, he said my mouse was ready for use, and he said that internet Explorer 10 has been updated. I clicked on Firefox as usual, expect that he gives me the screen where it asks me if I want that it restore all my tabs and it was the home page of Mozilla firefox was barebones in the sense that she was not one of my modules, or even the basic, file, edit, view, history, Favorites, tools, help buttons on the screen. When I walked into the story, it was only today listed and no site! I'm panicking and I really need to know how to get everything back to the way it was. I got an add-on of Personas with 36 backgrounds that I loved, and I don't want to have to go back and re-download all my modules, not to mention, there is no way, I would be able to store or to pick up where I left off with all of these tabs, that I need for work. Please help me!

  It's a temporary profile Windows, not Firefox's fault, but something (perhaps a windows update, they unrolled a bunch today) corrupted your Windows profile. http://www.sysprobs.com/fix-temporary-profile-Windows-7 can help you, it will also bring back your Firefox data.

• Why my computer hangs and the music sometimes?

  When my computer is blocking my mouse stops and I can't go for a little until the computer starts to move again it happen sometimes and when I want to listen to the music and watching youtube videos they get affected by Frost and they do beep sounds until my mouse was able to move again. I already clean my disk and I scan my computer with essentials, but nothing seems to work, can you tell me what is happening with my computer? I might have a virus, but I've already scanned my lot of time computer but nothing is found. When I look at my task manager, I see two race for internet explore, but I use an internet, I don't know why I'm getting this and I thought it would be the internet because it has the largest amount of space to use CPU and I see my performance top performer sometimes up to 100%, I don't know if this could be part of the problem , but I always get this annoying stupid freezing far if I would be very happy if you can give me any ideas or something?

  Looks like you can have a video and/or audio driver out of date on your system.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Now make some clarifications:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  While you wait, I could do this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Why my computer date and time keep changing at 01/01/2008

  My friend has a computer problem.

  The date of his computer does not change since 01/01/2008, today's date. After the formatting as system, it is facing the same problem. He tried to change the date through the configuration of the BIOS. But after the reboot, the date is still helping 01/01/2008.Please. He got windows 7 ultimate SP1. Thank you for your patience for reading this.

  There is a battery on the motherboard that stores configuration information, including the date and time.  It seems that if this battery should be replaced.  Check motherboard of your friend or the system manual for more details - the battery is usually very inexpensive and easy to replace once found.

• Why my computer date and time keep changing to 01/01/2003

  I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.

  Looks like your laptop CMOS battery needs to be replaced.  It is not the same battery that powers your laptop.  It is usually a battery of lithium-manganese dioxide of small coin shaped that resemble the shows big battery.  You should consult your instructions of the manufacturer on how to access and what type of battery is needed to replace it.

  A simple call to your computer manufacturer should provide all the necessary information.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the computer crash and reboot in the middle of editing, I get error at every start

  "Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts.

  IM using Win7

  and I can not find the preferences file nor can I find the file Previews.lrdata as suggested in this post

  Error at each start - after the installation of LR 5

  Thanks for any help

  The preferences file is not relevant to this error. Leave it alone.

  To remove the preview cache, follow these steps:

  1. quit Lightroom.

  2. in your operating system, look for your Lightroom Catalog. Catalogs are generally/Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows.

  3. Locate the folder whose name ends in "Previews.lrdata" and delete it. (note, may you enjoy a folder whose name ends with "Smart Previews.lrdata." You shouldn't need to remove that one).

• I can't open attachments of the e-mail account. When I try my computer turns off and restarts and when he comes back he says he recovered a serior error.

  A couple of days, I did a restore of the system at the end of July because the size of everything was off of the big time and had never done a system restore before.  Since I did, everything is returned to the way it was before sizes... and I can receive and send emails... I have JUST CAN NOT open attachments on e-mails.   When I click on the attachment to bring it up, it shuts my computer off and restarts it and when it turns on it says that it has recovered from a serious error.    How can I fix my email so I can set up attachments?

  What e-mail program?

• Why my computer does not freeze if online or offline?

  I can play solitaire and it will freeze in the middle of the game. I'll be in my email address and it will freeze. I can be offline and going through my photos and it will freeze up.i can be watching a tube in u online and it will freeze. Using anything in my my computer on or off line it freezes and I have to pull the plug and start again. I HAV scanned with my anti virus and windows defender and nothing does not.

  Several reasons-

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  Other things mentioned that can be useful to consider in these related threads:

  Why my computer becomes so slow all of a sudden?

  Why my computer crashes and I always have to restart?

• My computer crashed and after reboot, I lost all my saved passwords. How can I recover it?

  I was looking on a saved password when suddenly my computer crashed and restarted. After reboot I couldn't see the saved passwords.
  As a test, I saved a password and this password is displayed in the list of saved passwords, but all the others are still missing.
  How can I retrieve my saved passwords?

  Thank you!

  If the file has no valid data then you may not use this file.

  You can try if there is an earlier copy of the logins.json file.

  • Right click: properties > Previous Versions
  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

• The my computer icon and the icon my documents have disappeared off the coast of my desktop screen.

  To the right,.

  I used my computer as usual, for a reason that two of my icons disappeared off the coast of my desktop screen.

  The my computer icon and the icon my documents.

  I need these icons on my desktop I'm not able to access images and other important documents, can help me please how I can bring these icons on my desktop so that I can access my information.

  I don't understand how they suddenly dissapeard I've not done something different on the computer.

  Kind regards

  Diane

  Hi DianeCosic,

  What operating system or version of Windows do you use?

  We would need to know that in order to help you better.  If you still see the desktop and My Documents on your Start menu, you should be able to recreate the shortcuts by right-clicking on them from there.

  In addition, if something has changed on your computer, you can do a system restore to a previous point before the show began.

  Please, let us know if we can help you.

  Thank you!

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer shuts off and comes back over and over again trying to open a session

  Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
  Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

  Hi bonnieb1941,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. How have you tried to run the virus and bug checks?

  4. is this the machine is disconnected and re-login in back or just reboot?

  Step 1:

  If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

  Check the link for more information:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2:

  Also, try unplugging the external devices connected to the system and check if the system boots normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.