Why my dvd player on my computer will display file after loading adisc stop mode

Similar Questions

• IM using windows XP my DVD player on my computer will not play until I do

  I use Windows XP and my DVD player in my computer does not read it. I try to operate in driver D and I also used E driver

  You try to play a DVD?

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Try these links

  Download the CS6 products

  Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools

• After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  wlmail.fol is a tiny text giving the name of the folder. The exported messages will have filenames like 00D13E83 - 000025DF.eml. If you don't see all of the files like this, your export probably did not work properly.

  For a successful export, follow these directions:

  1. Set Windows Live Mail to work offline before starting.
  2. Create a temporary folder on your desktop * to contain the exported messages.
  3. In the Export Wizard, select the temporary folder, and then select all the folders.* *
  4. When it is complete, check that the number of files in each folder to the temporary folder is one more than the number of messages in the corresponding folder of WLMail.
  5. Copy the temporary file to its final destination.
     If you use a reader not NTFS to do this, you will see a warning that certain file properties will not be copied files. This can be ignored.

  * Windows Live Mail do not work with files that are not on a local drive, as opposed to an external or network drive. This is avoided by using the office as a temporary folder location. 
  * If you want to export the files sampled only, select each of them containing messages. Subfolders are not automatically selected by default.

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• My computer will not download an update, then stop not

  Original title: no closures

  My computer will not download an update, then stop not

  Hello

  Whatupdates fail to install?

  Trying to download update windows from the Microsoft Download Center and install it as an administrator.

  Here's how you install as Administrator:

  a. right-click on the Setup file and selectrun as administrator.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem

  Hello

  I have problem with my computer, when I start the computer it shows "computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem" this error message and if I insert the USB the computer does not recognize the USB.

  Please let me know ASAP troubleshooting steps.

  Thank you & best regards

  Sashidara

  Hello

  I suggest that you start your computer in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the link below for more information on the clean boot troubleshooting.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Why my dvd player does not play DVD blueray?

  my laptop has a dvd player and it does not recognize the movie blue ray discs!

  Hello

  Which laptop model is it and is it a blu - ray player / dvd combo burner or BluRay burner?

  If it's just a dvd player, it will not read blu ray read only to burn dvd

  Concerning

  GT4U

• Burning disc - disc does not play on any DVD player or a computer with the exception of my computer

  I have downloaded music and burned my computer on a DVD disc.  This disc can not play on any DVD player and computer but my computer.  I would like to read a disc in any CD or DVD drive.  Please tell me what I need to do.  Thank you!!!

  I recommend you burn a cd or a dvd with zune (microsoft Corporation) follow the instructions here to find out how to burn a cd or dvd to zune.

  If your song doesn't appear in your collection, I suggest buying your song with zune or Itunes

  ITunes costs about $ 1 per track and zune costs 14 dollars per 10 tracks.

  To learn more about the visit of zune music and reduced here.

  In Itunes, all you have to do is open itunes and click itunes store then the music and find the music you want.

  Download zune go here http://www.zune.net/en-us/products/software/download/default.htm

  To download Itunes, go here http://www.apple.com/itunes/download/

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Computer will not start after windows checkdisk thing?

  My office has gone through a few microsoft checkdisk thing today (16\11\2010), and after that it's over, my com could not start more.

  It would be to start all the way until the logo Windows XP there and after loading was done and usually, it would be a blue screen with your user account, but however he just showed a black screen and I waited a certain 20 minutes and nothing happened.

  Then, I tried to reboot 10 times over and always to the same black screen.

  When I tried the thing Safe Mode would stop any loading at some point of the code, which is

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\DRIVERS\agp440.sys

  That's what was on my setup on my desktop that I accessed:

  "Primary Master" > Hitachi HDP72502
  Primary slave > no
  Secondary master > HL - DT - ST GCE-852
  Secondary slave > HL-DT-STDVD-ROM

  Basic version of the BIOS > V6.0
  Revision of BIOS 3.25 23/09/2003

  Anyone know what is happening and how can I solve this problem?

  In the Boot Options menu advanced F8, choose this option and describe the results:

  Disable the automatic restart in the event of system failure

  Let us know if you do not see this option in the Advanced Boot Options menu.

  You will not get far if you can't start something, so if you have a CD/DVD player, do you have a bootable XP Recovery Console in order to have room for manoeuvre, boot on the CD, run chkdsk /r and then you can start solving the problem (instructions below).

  You are once started in the Console recovery XP and after running chkdsk/r, then you will be able to see if KB324764 will help you.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Computer will not activate after installing XP SP2 repair

  I see a lot of people have posted on this subject, and some have set.  I did a repair of an old computer installation.  At the start, it says I need to activate my copy of XP.  It just hangs.

  I can boot into safe mode (but not with networking).  I followed the 312295 article, which had me do the following

  1 regedit-localmachine-software... - winnt - winlogon - notify delete RESETS (there was none this entry, so I didn't do anything)

  2... regedit wpaevents OOBETimer 'Edit' (don't know what you mean about a hex file editing, so I just delete a line)

  3 renamed WPA.dbl

  4 extended wpa.db_ from wpa.dbl installation disc (ran OK)

  5 looking for any reset5.* or srvany.exe (no current)

  6 restart the computer.

  The same problem.   Still will not start.  Any other ideas?

  Some recommend to replace IE 8.  I'm certainly willing to do that - except my installation disc is a version of SP2.   So, how can I get a version of SP3 to install in safe mode?   (I download from another computer, but I don't know which version to get).

  Why I installed? There was no failure, but because after 8 years of use the computer was bogged down so he could barely work.

  But if this was justified is besides the point, because it is already done.

  I installed SP3.  I Redid the things listed above.

  I still get the message saying to activate windows and it crashes whenever I try.

  So I took the advice of others, installed IE8 in safe mode.  Upon restart, it worked!  (An arisen window asking me to activate, I said yes and it worked.

  This window looked like IE8 material - probably at the heart of the problem.

  Problem solved.

• Computer will display the text but not the graphics

  I have a computer that is running Windows 7 Pro 64 bit that will display the text, but will not be graphic print (what I get is several pages of garbled text and what looks like Morse code).

  The problem is the same with a HP Officejet Pro 6230 or an Officejet Pro 8100.

  The problem occurs if I am connected with a domain users account or the local administrator account.

  The problem occurs using the re-discovery of HP network port monitor or the standard TCP/IP port.

  Two other computers connected to the printer and also running Windows 7 Pro 64 bit, you do not have the problem.

  HP printing and doctor Scan didn't find any problem and is not the problem of printer Microsoft Fixit fix anything.

  I will try to assign another driver by following the instructions at:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/how-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  but I do not know what driver to use.

  This Technet article:

  http://blogs.technet.com/b/perfguru/archive/2008/08/06/print-spooler-crash-troubleshooting-steps.aspx

  suggests that a third-party port monitor may be to blame. I tried to remove the rediscovery of HP Network Monitor, but I get an error and I can't remove it. As far as I can tell, this is the third port only installed on the computer monitor.

  I have searched this forum, but could not find a similar problem that has a solution.

  What other information should I provide?

  Thank you!

  Jeffrey Pike

  Groton public library

  ELSA:

  Further investigation of this issue today, I learned that probably, printing problems don't were not due to the computer or printer, but a bad pass that the computer is plugged into. I ordered a new switch, and I hope that it will be the end of my troubles. Thank you for the help that is available to you.

  Jeffrey Pike

  Groton public library

• HP Deskjet 1000 printer, model: J110a printer will not print after loading Windows 10

  After loading Windows 10 would not print my printer. I deleted the printer and HP all downloads for it and turn the computer off. Start the computer up, re-load the printer driver, plugged and tried a test page. I get a message in the lower right of the screen that says "file saved in the documents folder" and no page is printed.  I tried troubleshooting, but without success.

  Hey @Bandit64,

  Issue seems to be with the spooler, try the steps below and mark the port selected in the printer driver settings.

  If you use USB - selected port must be USB001 or DOT4

  If you use a network cable - selected port must be HP TCP/IP Standard.

  1. stop the spooler
  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right-click on print spooler and stop it.

  2 remove the files of spooling.
  a. click on my computer.
  b. go to C:\WINDOWS\system32\spool\PRINTERS\.
  c. remove all files in this folder.

  NOTE: If the spooler does not work properly, this folder must be empty when the machine is not printing. Normally, it removes these files in this folder after that they were sent to the printer. Delete blocked files can free the spooler and allow it to continue normal operation.

  3. restart the spooler.

  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right click on print and start spooler.

• Why windows media player allows me to 'slide' video files to cd/dvd to computer sync?

  I am trying to copy a video disc that I made to my computer, but when I try to sync windows media player does not allow me to drag the files in place for this operation! When I ask your help files that they not give information for the music of copy/extraction of video files! Why are you being *?

  Hi Ronald,.

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you can not drag video files from a drive on the Windows Media Player.

  I would appreciate it if you could answer the following questions to help you best:

  1. what happens when you try to drag the files?

  2. do you get an error message?

  3 have there been recent changes made on the computer before the show?

  I suggest to copy the files on the desktop and try to drag and check if this may help. The player adds automatically a file that you play from removable media such as a CD or DVD.

  For more information, see the link.

  Add items to the Windows Media Player library

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.