Why my email almost freeze and take a long time to copy for the file?

Sometimes it works fine after hitting send them as before. But there are others, perhaps a full minute then makes me want to try again... what he's working on.


Tags: Thunderbird

Similar Questions

  • Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

    Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

    Hello C Johnston,

    Did experience you these issues when streaming video from any other website?
    It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
    You might try to optimize Internet Explorer to see if it helps at all:
  • My computer is very slow and takes a long time to connect and disconnect

    Original title: sign out of questions

    My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

    Install the background file. See if it suits it

  • Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

    Device: BlackBerry Z10
    Model: STL100-1
    Software version: 10.2.1.537
    OS version: 10.2.1.1925
    Carrier: Beeline (KZ)

    Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

    Tried to activate or disable this setting, the result:

    On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

    Off - 1 min 17 sec

    What is the problem of the time difference?

    Good, thanks

  • Programs to freeze or take a long time to respond

    When I run new programs that they can take a long time to start or they freeze. This happens sporadically, but enough to be a nusiance. I followed all the steps listed under the section "fixit" of Vista Hoem premium and the maintence of the Vista Help sections section: I've defragmented, wipe the drive, run the system performance (overall score of 5.4 due to memory all other 5.9), has increased to 8000 MB swap file and several other steps. If I try to click on the program, while the little circle turns, my screen becomes a pale white and I can't do anythingfor several minutes

    Has anyone else had this problem and solved? I have a lot of space (free 400 G) and 4G of RAM.

    This happens anytime, not only after the machine has been for some time, given the previous answers to this question.

    Daniel Dixon III

    Hi Daniel,.

    What application are you trying to access?

    You can perform the clean boot, and then check if the problem persists. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

    Reference:optimize Windows Vista for better performance

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

    After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

    I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

    Just curious if anyone has encountered this kind of slow startup time and found a solution.

    Thank you!

    I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

    http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

  • Still burned DVD takes a long time to load into the reader

    I created a DVD in Encore CS3.  The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3.  I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs.   The DVD works fine but takes a long time to load in one of my DVD players.

    A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu.  Each time is different.

    (This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)

    In another Sony player my DVD on average about 25 seconds

    A Panasonic player, it takes about 15 seconds

    In a portable player from JVC, it takes about 8 seconds.

    That is what it is?  This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.

    Help, please

    Thank you

    EDM

    EDM,

    One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.

    Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.

    What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.

    How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.

    As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.

    Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.

    Good luck

    Hunt

  • LR6.5.1 creates the zip file for archive back-up and takes a long time

    Hey

    have a quick question because I updated from LR5.7 to LR6.5.1 two days ago

    I am runing a MACBookPro with OSX 10.11.4 system

    I noticed two differences main performances, where I don't have an explanation for:

      1. LR 6.5.1 creates a zip file, when backup archive (automatically, or can we turn that off?)
      2. LR6.5.1 takes twice as long for the back-up LR5.7.1 (a reason for this?)

    Thank you for feedback. These things wonders, if not explainable to me

    Best regards

    Thx for the quick reply ultra th

    Meanwhile, I downloaded 6.6 and again creates unziped version of backup

    Could be, at that time there difference between 5.7 and 6.5 in creating backup has been due to the effort of compression

    THX and best regards

  • Captivate 7 - Quiz questions take a long time to advance to the next

    So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.

    When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.

    I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.

    Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.

    Thanks in advance,

    Arthur

    I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:

    Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).

    As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.

  • Router now takes a long time to connect to the internet

    Lately my internet was very slow for example that if I opened a browser for watching youtube videos of my favorite commentators, it takes so long to load, but Monday about 2 days ago, everything has been loading web pages and videos, now it takes forever to load anything on the internet im confused on what the problem is:(s'il vous plaît aider)

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You use Internet Explorer? If so, what version are you using?

    ·         You get the error message?

    ·         You are able to access other websites other than Google/YouTube Web site successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Why is my Internet connection so slow?

    Windows wireless and wired network connection problems

  • Take too long time to come for Windows

    Hello

    I have Pavilion g6-2031se and of the last two days it takes too long to come to Windows. I faced this problem for the first time and I do not use my notebook for Skype, Facebook and only very light work. Can someone help me with this?

    Thank you

    Ganga

    @Ganga,

    No worries, I would like you to try a clean boot. This allows the computer to boot without unnecessary programs or offers to start with it.  When you open this document of croll to the section "How to perform a clean boot" once listed there to expand the section for your operating system to get the appropriate instructions.

    Once you have made the appropriate changes, restart the computer at least 3 times and see if you notice a difference not how long it takes to start.

    Please answer as soon as possible.

    Thank you

  • Closed Thunderbird meets and takes too long to download or open the email

    Have been using Thunderbird on this computer without any problem, it takes 3 to 4 minutes to download emails with no spare is not. Then when I try to open the e-mail may take 2 or 3 minutes to open (usually get an error "not responding" and then finally opens Windows 7 Pro.) I disabled all extensions and plug-ins. Still takes forever. Thunderbird on Windows 7 Pro 2 other computers works wonderfully. Just can't understand why it doesn't

    https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  • Firefox and internet Explorer hangs and takes a long time to start.

    Original title: I need help.

    Well, I'm sick and tired of these companies, making it so their products act upward. It is not yet a solution (even if I tell the computer to find a).  And it is not yet trying to find out what's wrong.

    I also thought that Firefox would be better but apparently is taking minutes to open and I

    I have Internet Exporer 8. And Internet Explorer 8 should have been better than 7. It is on the first few weeks, then it plays smooth and not respond. I only am not upgraded to 9 because I didn't trust it. I'm not saying that it is a virus, I don't want to freeze my computer.

    So what you think causes do not answer?

    Hello

    1. have you done any change in software on the computer lately?

    Step A.
    Please check if you are facing the same question when working in mode safe mode with networking.
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
    e. when Windows starts, use check and Internet explore if the problem persists.
    For more information, refer to the article below.
    Troubleshooting in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

    Step B.
    If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why dose my laptop take a long time to start?

    My lap top takes 3mins to start why?

    Hello

    Three minutes is not long however you can probably cut that with these methods.

    You can use these to control which startup programs. Many others who settle start-up are not
    really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
    load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
    can control the files they support (to be sure that you continue to use only). Those who are not common
    examples and not meant as a slam on these programs very well.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when
    your system boots and you connect. Autoruns also shows you the complete list of the registry
    and where applications can configure Auto-start for the files settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    -------------------------------------------------------------------------

    Performance and maintenance tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Firefox takes a long time to close since a recent update and memory of pigs.

    Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

    Upgrade your Firefox 9 browser and check

Maybe you are looking for