Why my HP Photosmart C4480 all-in-One printing after I removed a paper jam not?

When printing, I added paper into the tray paper, and the rollers grabbed the entire stack of paper. The printer has stopped, noting "paper jam". I removed the stack of paper in the printer, and now it won't print at all.  (HP Photosmart C4480 all-in-One)

Thanks for all the useful things try, but without apparent reason, the printer started working again.

Tags: HP Printers

Similar Questions

  • 6510 all-in-one printer 211: 6510 has suddenly paper jams paper

    Paper jams are continuous. The upper part of each leaf has a 1/6 "dent about 1/2" long and 3-4 "on the side. Another paper has same type of damage. Will be removed all paper crowded at the top of the machine. Decided that there must be a mechanical problem and removed the 7 screws of the plastic on the bottom clamp to remove the bowl. When he was abducted some plastic black 11/16 "long with a 7/16 diameter gear on each end is out. The tree has a hole inside had to an axle. I sought visible signs where it may be at the bottom without success. I need advice before I go into it any further.  Thanks in advance for any help.

    Hello

    IAM afraid, you may need to replace the printer.

    Call HP Tech Support 1-800-474-6836 (USA)

    If your printer's warranty, you can be equipped with options of recovery.

  • Message or incompatible cartridges on HP Photosmart C4480 all-in-One Printer

    I changed my color ink cartridge (a 75XL) on Monday, 16/04/12, and everything printed fine Monday.  I turned off my HP Pavilion laptop and printer on Monday night.  Tuesday, 04/17/12, I started working on my laptop and when I tried to print the small printer screen says "not compatible ink cartridges and my laptop screen said" the next cartridge has a problem: black ink cartridge '.»  I had kept the black in (a 74XL) cartridge because he still has a lot of black ink in it.  I removed the color and black cartridges, made sure that the point of contact with the printer is clean, so that both cartridges have ink in them and they are placed in the correct locations (black on the right) and the cartridge color left.  I don't know why I get these messages and why the printer does not print when he did print Monday after changing the color cartridge.  The two ink cartridges are XL, but they are not identical. The black ink cartridge is more horizontally (fate of the stick to the door of printer cartridge) further than the color ink cartridge.  The two are the same vertically / height.  Both cartridges are the type "XL".  I tried to download and use the diagnostic tool and it has led to tell on the screen of my laptop there is no problem with the printer.  Can an HP agent contact me and help solve this mystery.  It's very frustrating because I only use HP products (including two ink cartridges); and if I had to buy new cartridges, how do I know that this problem is happening?  Help please!  My email is [removed personal information] Thank you.

    Hello

    Please see the following link for t\s on this issue.

    http://support.HP.com/us-en/document/c01442936

    If the t\s has been completed restore printing to its default settings, remove the cartridges from the printer.

    Steps to follow:

    • Start button / stop + Combo Cancel button
    • Enter the combination of special keys 1 [Scan] 3 [color copy] 2 [Black copy]
    • "Support menu" will be displayed
    • Press 2 [Black copy] until the display shows "Reset Menu".
    • Press the 3 [color copy]
    • Press 2 [Black copy] until the display shows "semi-Full reset".
    • Press the 3 [color copy]
    • The printer shuts off and turn on by itself, else wait for 20 seconds and power on the printer

    Note:

    All user settings will be restored.

  • HP Photosmart C4480 all-in-one printer. Message "Incompatible cartridge". New 75 HP cartridge inst

    It was for a while, then recently started printing with the message "Incompatible cartridge".  I followed the instructions how to clean cartridge, still with the message "Incompatible cartridge".  Help!

    HI - at this point, replacement of the cartridge would be the next step.  I hope it solved for you!

  • HP Photosmart C4480 all-in-One gives the HP Solution Center error

    Hello

    I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

    I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

    When I run the HP Solution Center, it says at the top:

    "HP Photosmart series C4400

    Disconnected! »

    When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

    Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

    Any ideas?

    Thank you!

    HP Envy m7 running Windows 10.

    Simply click on the star

    Thank you

  • HP Photosmart C4480 all-in-One takes forever to print

    HP Pavilion dv6-6061eo laptop

    Serial number [personal information deleted]

    Prod, number: LQ769EA #UUW

    Printer: HP Photosmart C4480 all-in-One connected USB

    Operating system: Windows 7 - all updates - updates of August incl. -ETH on

    Troubleshooting done - but all the reports in the order

    My Tech expertise is intermediate.

    No new software has been installed

    Laptop has worked without problem with a printer HP Photosmart C4580 in Scandinavia, but after my return to France where I use a HP Photosmart C4480 takes forever to print even a single page.

    Hello

    Curiously, the problem has now been resolved by changing the ink cartridges HP with a new set of HP ink cartridges.

  • Impossible to analyze using Photosmart C4480 all-in-One

    I use the Photosmart C4480 all-in-One on a Mac, 10.6.8.  Impression always worked without problem but digitization has never worked.  Today, I realized that the software provided with the printer is by OS 10.5 (HP Scan Pro always gave me an 'unknown error' popup).  I downloaded version 10.6 on the HP site and installed on the old software.  I opened the new HP Scan, select a profile and press Scan and the program froze and I had to force quit.  I tried several times and it kept happening.  The all-in-one has a screen where you can scan a computer to the unit, and I tried that as well.  The program "Open in Preview" open on my computer, and the screen on the all-in-one read "Scanning" for a short time but then returned to the menu analyze.  Nothing happened on my computer or the scanner.  I decided to uninstall all the HP software and reinstall version 10.6, where crushing the 10.5 version had caused these problems, but after doing so I got the same results scanning HP and analysis on the all-in-one.  Thanks a bunch if you can help!

    If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

    Go to Applications/Hewlett Packard / click Uninstall HP
    Click on continue
    Highlight your device in the left pane
    Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
    There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
    Click on continue and let it finish

    Download and install this: http://support.apple.com/kb/DL907

    Restart your Mac.

    Now reset the printing system:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!

    Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

  • I have a photosmart C4480 all-in-one who needs a new cord.

    My photosmart C4480 all-in-one needs a new cord as the current no longer matches the printer tight enough.  I have to hold the cord in the right position in order to print anything at all.  How can I get a new power cord?

    Do you need a power cord or the power module?  The cord is a standard element that can be found in any computer or Radio Shack.  The module is part number 0957-2231 as appearing on the HP Site's Partsurfer.

  • HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

    dose

    All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

    Hello

    Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

    Good luck!

    http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  • HP Photosmart 5520 All in One printer cancels an order of copy of the glass

    HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

    I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

    I used the doctor scanning HP and installed my printer again, but that has not helped.

    RodeDraak

    Hi RodeDraak,

    Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

    You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

    Issues when connected to an uninterruptible power supply/Strip/surge protector power

    In this document, you will see,

    QUESTION:

    Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  • "" HP Photosmart e-all-in-one Pr: "HP Photosmart e-all-in-one printer - D110a installed 10 windows now scanner does not work

    Application of scan works

    Try download and install the driver and test the HP Photosmart Software Suite for your printer at http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-e-All-in-One-Printer-series---D1/4023244/model/4023245

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

    My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

    @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

    I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

  • Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

    I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

    When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

    Thanks to kkcb9395 for your help.

    Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

    For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
    http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
    If you find a repair manual, let me know.

    I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
    Thanks again for your time.

  • can I use XL 364 cartridges in color in my photosmart c309g all-in-one printer?

    My photosmart c309g all-in-one printer has a cartridge black 364 XL and smaller for the colors. Color XL cartridges can be purchased in stores like Media Markt. Color cartrideges XL fits my printer?

    Hello

    Yes, the XL 364 cartridges are compatible with your printer, as you can find below:

    http://support.HP.com/us-en/document/c01842734

    Kind regards

    Shlomi

Maybe you are looking for

  • Incompatible data Configuration of Extension core will not update for 3.28.2 :(

    I try to use the fix for this problem If the Ethernet on your Mac stopped working recently - Apple supports I have a wifi connection so I took the first set of instructions. Unfortunately, the kernel Configuration data Extension Incompatible will not

  • Then updates older than the newest one be removed safely?

    original title: I'm removing unnecessary programs from my PC and there are as many old updates MS still displayed in the populous.  Then updates older than the newest one be removed safely? When I go into Control Panel, then add/remove programs, ther

  • How can I change the fingerprint logon?

    I had a local guru clean my Dell laptop. He called and said he was not able to connect and I gave him the password to get connected. When I took the computer he told me that he had changed the fingerprints to a fingerprint logon. I want to erase her

  • Windows 7 does not detect the GPS Garmin device.

    Original title: the hardware detection. I recently bought a Garmin GPS.  I can not get my PC running windows 7 to detect it.  Fortunately, I still have my old machine with XP and it recognizes.  How can I get my new machine to detect.  I down loaded

  • Low Volume speaker on E520

    The speaker volume is low on my ThinkPad Edge E520.  I don't know if this is supposed to be stronger or not.  I can't play something for a few people that gathered around my laptop and expect to hear.  I've used other mobile where the volume can be r