Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

Similar Questions

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode

• Suddenly, my iMac (27-inch mid 2011) works with my time capsule.

  It shows that it is connected to the time capsule, but when I go on the internet, the screen says that I'm not online. However, my iPhone works very well using my time capsule as the router.  My iMac has worked last night. I put to sleep and when I woke up, it does not go online.  I tried unplugging everything. I also tried to remove my time capsule of the recognized networks and then connection. Still does not work. Any thoughts?

  Fixed

• Cannot install Windows 10 OSX Boot Camp 10.11.8

  I wonder if a solution was developed for the installation of 10 64-bit Windows in Boot Camp again.  I have a hard drive 3 TB of fusion that I partitioned (1 TB for Windows 10) via Boot Camp.   When I start the computer in Windows install (on thumb drive) and choose the partition to install Windows 10 in, I get a message that the partition is formatted in GPT not NTFS.  I click on the format button, but it loop back to that error message about TPG.

  I get no further than that.

  I left and I restarted the mac OSX, entered the windows to manually thinking NTFS partition partitioning regular and formatted program that it would solve the problem.

  When I rebooted on the thumb drive and restarted the Windows installation, I got the same error (INCORRECT FORMAT).

  I read about the solutions of terminal mode using Linux command, but hey, Boot Camp should take care of this without all this extra work that could potentially break the fuser unit I am correct?

  Or is this a Microsoft problem because the format function does not work in the Windows Installer?

  If anyone can help us with that, I would be greatly appreciated.

  See you soon.

  Jon

  See this document

  Use 10 Windows on your Mac with Boot Camp - Apple Support

  10.11.8?

• Cannot load Windows 7 using Boot Camp

  I am also unable to load Windows 7 on my MacBook using Boot Camp. When Boot Camp prompts Windows Setup disc, I put in the disc of Windows 7 Edition complete software Home Premium that I bought, and then my MacBook again request the Windows Setup disk and ejects the disc of Windows 7 Home Premium. On my MacBook, I have OS X version 10.8.2 and I've updated memory to 4 GB. What I am doing wrong?

  Delete and re-create the Boot Camp partition. If this does not work, use the Boot Camp Assistant to create a bootable copy on USB and use it to boot from to start the installation.

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 has 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM

• Problem Windows/Bootcamp Partition with unsupported Mac (iMac 21.5 "mid-2011)

  I tried many door routes stealth to install Windows 10 on my iMac (21.5 inch, mid-2011; 1 TB SATA disk), which seems to be not taken in charge by Apple. Whenever I try to use Bootcamp to try to establish a partition, in the end it cuts and force restarts my computer.

  I decided to make my own (150 GB, FAT MS-DOS) partition and a bootable USB stick with all the files .iso on it. The bootable USB key works very well and can get into Boot EFI without problem. The score, according to the EFI boot and Windows Installer, "has a table of MBR partition...". [and] Windows can only be installed on GPT disks. »

  I tried to format the partition to NTFS by using the command-line Windows, such as proposed in the link below, but after downloading the Tuxera NTFS file to move the .iso to the Windows partition image file (I guess to make its own bootable drive) the drive itself is not started.

  In fact, the Windows partition came not in the start screen (hosting option after reboot OR allowing the computer initiate by itself).

  https://www.reddit.com/r/Mac/comments/3rzxd5/guide_windows_10_bootcamp_on_unsupp orted_macs.

  

  After trying to format this partition using the Windows command line, Windows begins to remove it and provides the same error message. After some research, I found that the partitions are hybrid and need for special maintenance. I tried to use gpart, but when trying to convert ONLY TPG, took place the message in a terminal:

  Caveat! Main partition table overlaps the first partition of 32 blocks!

  You need to remove this partition or resize in another utility.

  Caveat! Secondary partition table overlaps the last partition of

  33 blocks!

  You need to remove this partition or resize in another utility.

  I activated the command 'csrutil disable' in Recovery Mode in order to bypass the Protection of the integrity of the system, I found that some users of El Capitan were problems with this.

  I was not able to proceed to the question since this last error and I'm not sure how to proceed, especially because I don't want to lose my data on my Mac hard drive. If anyone knows any information on how I should proceed, please let me know!

  1. you use Boot EFI on a preUEFI computer.

  2. to help TO do a FAT32 partition will also create a hybrid MBR. Please after the release of

  sudo fdisk/dev/disk0

  3. you need not of Tuxera, because Windows install has already the ability to convert FAT to NTFS.

  4. your built-in optical drive works? If so, your W10 ISO burn to a physical DVD and try to follow the standard installation of the BCA.

• I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  Hi Clayton,.

  This means that some services has tried to open a connection & couldn't, possibly IPv4 vs IPv6 or iCloud/back to my Mac.

  Mifgt try the helpful message here...

  Name of my iMac computer continues to change automatically after Yosemite upgraded

• How to move from the old iMac, iMac (24-inch mid 2007) to the new

  Got an iMac (24-inch mid 2007), and the desire to buy a new... How to transfer from 'old' iMac again?

  You will have the option to do so when you set up the new iMac; He can run through a network, external drive or disc mode target.

  (140878)

• I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card.

  I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card. Is there a way to improve or update my graphics card? I currently have an ATI Radeon HD 5670 512 MB. Any help would be appreciated! I'm also running on OS X El Capitan.

  You can't pass the GPU. Make sure you check the game system requirements to make sure that they will work on your model.

• iMac 24-inch, mid 2007 - can I switch to El Capitan?

  iMac 24-inch, mid 2007 - can I switch to El Capitan?

  What is the system requirements?

  Are there concerns more lose features of applications like iPhoto or iMovie?

  Thanks for any advice you can provide :-)

  Rob

  Hi, here is the link for the required upgrade page of El Capitan

  Update of OS X El Capitan - Apple Support

• installation of Lightroom 6 on MacBook Air (13 inch, mid 2011)

  I tried to download the lightroom.

  But keep showing 1 Code error when downloading.

  It is not available for installation on the MacBook Air (13 inch, mid 2011) specifications?

  Thank you.

  Do you get the error code 1 when installing Adobe Creative Cloud app?

  If so, please see link below:

  Error code: 1

• Will be my imac 27 inch mid 2010 - support Cuda

  Hi, forgive my ignorance here, but basically, as I see after effects CC needs a better ability to the graphics card.

  When I start the CC AE, it refers as needed Cuda - to Ray traced rendering.

  Now, I have since downloaded Cuda - question is ' will it work with my iMac? (write below)

  * imac 27 inch-mid 2010 - graphics ATI Radeon HD 5670 512 MB

  All advice would be greatly appreciated as it seems the Ray Traced rendering is unusable without it, hope I'm wrong

  See you soon,.

  Simon.

  You don't want to use the rendering of the traced to the RADIUS. The ray-traced rendering engine is now obsolete. Use Cinema 4 d instead. It's free with AE CC, it makes it faster and it is much more powerful.

  Discover the details of the CINEMA 4 D integration with after effects CC (12.0)

  Installing CUDA on a Radeon graphics card will mess up your machine. CUDA is NVIDIA technology and only works on NVIDIA cards. Read this article: do not install drivers NVIDIA CUDA on computers with AMD graphics processors