Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

Most desktop printers cannot image all the way at the edge of the page.

Tags: InDesign

Similar Questions

  • Why 42 Firefox does not display the source page

    When I choose to view the Source of the Page I get a message 'document has expired. It happened not in previous versions.

    Ah! view_source. Tab set to true. I put it to false, and the world returns to normal!

  • Print jobs may not reach the printer

    I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

    If a draw is sent, he goes to Quebec, she disappears, but does not reach the printer. It shows the same problem even with the local administrator account.

    It is a network printer and works great for other users.

    Printer driver has been updated.

    Spooler service works very well

    No errors in the event logs.

    This paragraph is confusing.  The computer is now connected to a domain or not?

    I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

    The problem you describe appears if the printer port is not directed to the correct address.  This often happens with wireless printers, but if your computer is connected to a domain, you should ask your network administrator for assistance.

  • Portege R100 video cable does not reach the replacement LCD screen

    Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

    Here are 2 pictures of what I mean

    Hello

    Where did you buy this screen?
    Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

    Looks like it s not fully compatible
    However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

    In your case, I recommend you contact the guy and ask for compatible cable!

    Welcome them

  • How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

    Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

    I assume that you use a while loop to keep the updated value.

    Add a record to offset to your looping it initialize with a U32 (time in ms)

    Add the registry to offset to your loop that keeps the previous value of your bool

    When your reaches the threshold value => the light and set the current time in your shift register.

    In the next iteration of the loop weather check value is still above threshold

    => Y-online previous set to true?

    => Y-online the next iteration

    -Online N => turn switch on and set the current time in your shift register.

    -Online N => subtract the time current less time shift record-online more then 5 seconds?

    => Is => keep turning on

    -Online N => turn given

  • After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

    I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

    I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

    Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

    My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

    Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

    Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

    Any help would be appreciated. Thank you.

    You can try a different theme of Windows?

    Have you tried to start the computer using Windows safe?

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • does not scan the whole page, only the column

    My All-in-one HP Officejet Pro L7580 scanner does not scan the entire page.

    Regardless of where to send... Word, Mail, photos... all I get is about 3 inches of column of the entire page.

    What can I do to remedy this?

    IF the copy works perfectly. Try to open the HP Solution Center and find the settings > scan settings > scan document or scan picture settings.

    Search for advance settings or more and are looking for an option on the digitization of multiple files or just the entire page or something to that effect. The software may have missed in the analysis just a part of it. You can check the settings where you can have a preview of the scanned document and find the broken line around the scanned image, you need to move, it will scan what's inside the broken line.

  • HP Envy 27: Printer does not finish the print job

    Computer is HP Envy 27. Have a for printer HP Officejet Pro 8600 wireless connection. Have old ACER desktop also wireless to the same printer. Print jobs larger than 3 pages, the old ACER works very well, but envy does not. The printer stops after only 3 or 4 or 5 printed pages. Sometimes I hear a small beep in the printer when the printer stops printing. Also the desire does not eliminate the queue when the print job is finished. Entered in the configuration advanced on the computer for printing options and checked to see if that option (not playoff jobs in queue) has been verified. It was not the case. So I don't know why it is keeping the job in the queue. When we first got the urge last year, he had the printing problem, although she probably had the problem of the queue.

    Hello autumnperson1,

    Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  • 26 of Firefox does not load the home page. Instead, it loads the previous session (and that includes all tabs). It does not matter how Firefox is closed.

    26 of Firefox does not load the home page. Instead, it load the previous session, regardless of what has been entered in 'Options '. The browser runs in Win 7.0 64 bit; Norton Internet Suite 21 provides security features. There are some solutions 'cloud', also running as Google Drive, box, Skydrive and Cubby. The browser behaves in the same way in all my machines (installation and the OS is similar to that described above) and no amount of reset 'Options' seems to affect it. Nor is it affected by the way that Firefox is closed. This is obviously a bug that should be fixed.

    You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

    You can use this button to go to the Firefox profile folder:

    • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  • URL address box does not display the current page.

    With the 4.0.1 update, the URL address box does not display the current page.

    All that shows is the text: «Go to web site»

    To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

    Is there a way to display the url of the current page?

    This problem may be caused by an extension that is not working properly.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

    I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

    You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

  • I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

    I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

    You probably should have updated to 10.5.8 first.

    Installation or update of Snow Leopard:

    http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

  • My computer does not accept the print command.

    My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

    Sherimcfalls,

    1. what operating system is installed on the computer?
    2. the problem occurs with any particular application?

    Method 1
    I suggest you try the steps from the following link:

    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2
    Try to set the default printer.

    Change your default printer
    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  • Put HP1012 in place. The installation process does not recognize the printer.

    I've made sure the device is on and the usb cable is connected.  Printer worked fine until I needed to reinstall the windows xp operating system.  Now reinstall the printer set up the software does not recognize the printer.  Before reinstalling the operating system, the printer worked great even if it is quite old.  I use the original CD game in the installation process.

    Problem solved.  I plugged the printer into different usb port cable and the computer immediately recognized the printer.  Previously, I had ports different usb, but not the one where he worked.  I have 7 usb ports on this computer, and it seems that one does not work.

  • Windows xp64 does not detect the printer hp laserjet p1102

    Hello

    Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

    Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

    Hello

    I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

Maybe you are looking for