Why my internet connection sharing with my xbox 360 does not?

my internet connection sharing use to work with my Xbox, but all of a sudden, it stops working, I then went on another computer which had xp (my other had 7) and it worked for a little started but still spoil later. I have another computer with xp and won't work at all with it. I think that I put everything in the right seat, and when I plug my 360 into my router it works but I want to be able to play in other rooms. I also tried to fill the connection on all 3 computers and it never worked.

Hello

See the following article:

Use your computer to connect your Xbox 360 console to Xbox LIVE

See also:

Xbox 360 support

Tags: Windows

Similar Questions

  • WMP11 & sharing media w / Xbox 360 - does not display settings ' share my media to.

    Recently, I tried to connect my Xbox 360 to my laptop PC running Windows XP SP3. All the official how - in fact seem as easy as going to WMP 11, then the 360 was on and connected to the network and will 'Media Sharing' and check the box, "share my media". However, while they were inspecting the area, nothing happens, no detail windows open upwards. All are two buttons, OK and CANCEL. I click OK, all gray outside for a while as the settings are applied, then it returns to the same window sharing media files, no new options, no new parameters. Like nothing happened.

    And indeed, nothing has changed.

    Gentlemen, what do I do?

    AGVKrioni,

    Sorry to hear about your difficulties.  No fun!  If the Xbox 360 don't watch not appear inside WMP 11 as a shared device, then it is possible that WMP 11 does not see the Xbox.

    1. the xbox is completely up to date via xbox live?

    2. it can also be caused when the Xbox and computer are actually on 2 different networks (despite being connected in the same building).  Connect the computer or Xbox Wireless?  To check that they are in fact on the same network, obtain the IP address of your Xbox.
    -Go to system settings network settings.  Note the IP address.
    -Go to your computer.  See if you can test your XBOX (see on the network).  Open the prompt (start, run, "cmd").  Type "ping ipaddresshere ".  Do you have an answer?

    3. check that you have all the latest Windows updates (there may be other updates/patches for network management issues)

    4 turn off your Windows Firewall

    I hope that these 4 ideas help or someone much more intelligent that I add ideas, because there is nothing else I can offer.  I hope that helps!  Good luck.

  • Internet connection shared with Xbox

    I need to restart my internet connection shared with my Xbox everytime I turn it on to connect to Xbox Live.  How can I keep this happen and more keep the Xbox all the time?

    Hi JohnnyBz,

    I suggest you send your query in Xbox live forum to get the best support that this is a dedicated forum for Xbox live. Link: http://forums.xbox.com/

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • File sharing with my Xbox 360

    I have an Xbox 360 (the older white kind) that I used to share media files to my network wireless for my laptop.  Recently it has stopped working.  I replaced my old Linksys G Router for a new Netgear N300.  I have set my network sharing settings in the same way that I already had, and it has stopped working.  I still gave in and just hooked up the old linksys router, but now it wont even work with it.   My pc can see my xbox 360 but my 360 does not detect my pc. I have my 360 hard wired to the router and then I could always just see my laptop wireless at that time here.  Help, please!  I am running windows vista 64' put his point most recent up-to-date.

    Give the Xbox a ip address and add its IP address in the DMZ on the router option. If its got a. That's what I had to do, to save me to add ports to the router. Given that (the router, I got, Dlinks info on the site was wrong, it didn't work anyway lol).

    Saved me a lot of time. Don't forget to configure the center of media on the Xbox and enter the digit 8 in so it will work (if you want to use Media center as well)

  • I can connect to the internet have the perfect internet connection, but each webpage says its does not

    I know that it is not my internet connection my bf and I are one the same internet connection and his works fine what else could be

    Hi Stoner,

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    Which web browser is installed on the computer?

    Method 1
    Step 1: I suggest to start the computer in safe mode and check if the problem persists.

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

    Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/kb/929135
    Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.
    Method 2
    I suggest you try the steps from the following link:

    What to do if Internet Explorer stops responding (applies to Windows 7)
    http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-Internet-Explorer-stops-responding

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
    Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

    I hope this helps. Let us know the result.

  • Xbox 360 does not recognize the pictures or videos using Media Center

    My Xbox 360 suddenly stopped recognizing the pictures and videos using Windows Media Center.  I have a number of files on my laptop that I like to stream through Media Center so I can watch them on my TV, but WMC no longer seem to acknowledge their existence.  I can play my entire library of music very well, but when I try to access my photos and my videos, it shows me my user folder and claims that there is nothing in it.  Not really sure where to start even on that.  My firewall is let through the WMC and my network is configured to share media.  Windows Vista by the way.

    Hi Reaper63,

    1. did you of recent changes on the computer?

    2. you receive an error message while accessing files on the Xbox?

    Method 1

    Check if you are able to access photos and videos through Windows Media Center.

    Solve problems with pictures in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-pictures-in-Windows-Media-Center

    Method 2

    Copy and paste the following script into Notepad and save it with a .reg extension. Right click and run it. Restart and check.

    Windows Registry Editor Version 5.00

    [HKEY_CLASSES_ROOT\.jpe]

    "PerceivedType"="image".

    [HKEY_CLASSES_ROOT\.jpeg]

    "PerceivedType"="image".

    [.Jpg]

    "PerceivedType"="image".

    [HKEY_CLASSES_ROOT\.gif]

    "PerceivedType"="image".

    [HKEY_CLASSES_ROOT\.wmf]

    "PerceivedType"="image".

    [HKEY_CLASSES_ROOT\.png]

    "PerceivedType"="image".

    [HKEY_CLASSES_ROOT\.wma]

    "PerceivedType"="audio".

    [HKEY_CLASSES_ROOT\.wav]

    "PerceivedType"="audio".

    [HKEY_CLASSES_ROOT\.mp3]

    "PerceivedType"="audio".

    [HKEY_CLASSES_ROOT\.mp2]

    "PerceivedType"="audio".

    [HKEY_CLASSES_ROOT\.wmv]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.avi]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.dvr - ms]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.mpe]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.mpeg]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.mpg]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.m1v]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.mpv2]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.asx]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.wm]

    "PerceivedType"="video".

    [HKEY_CLASSES_ROOT\.wmx]

    "PerceivedType"="video".

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have samsung wave3 bada os phone when I connect it with wireless bridge browser does not support or support vary well

    I use samsung wave3 phone with bada OS when I connect with wireless by wifi bridge connection a few times it supports and some time was not favorable

    Hello

    Try to contact Samsung Wave 3 support for assistance related to the question, because it is a community of Windows.

    http://www.Samsung.com/us/support/contact

    Hope the helps of information provided.

  • Xbox 360 does not leave my sansa view play as "portable".

    I plug in my sansa view on my 360, it will say "connected", but it not is as "portable device" if I could play it through the system... I would appreciate help

    You will need to put your content on the MSC view (put the player left hold/press release of scroll wheel/plug in device).

    In addition, you will need to connect the view in the Xbox in the same way as it appears in MSC mode.

    Enjoy.

    Come on Sansa!

  • Help! Armageddon! -My Xbox 360 does not turn on

    Was working fine earlier today. No power outage. Checked breaker box - ok. Is there something I can do? It is not heated. Totally cool. Ahhhh! Help! I must have my Xbox! Thanks for your help! Peace!

    Hello

    For most of the problems of Xbox:

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Why not wmc7, like vista allow you to browse the internet on your TV for xbox 360

    original title: internet browser for xbox 360 using wmc7

    Why not wmc7, like vista allow you to browse the internet on your TV. I have the Extender plug.

    The Xbox 360 does not support Internet TV content. S.Sengupta Media Center MVP

  • problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

    Original title: problem with Internet connection sharing

    my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

    in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
    then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
    so, I'm a person answer in this forum
    ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

    IP address: 192.168.0.1
    Subnet mask: 255.255.255.0
    Default gateway: no
    "DNS server: none.

    I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP
    and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

    I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

    What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings
    But why after I restart my PC, this problem comes...
    someone knows how to help me with this problem?

    Hey, Mimbs,

    You can try the similar thread to the next with a possible solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

    Also for reference:

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  • Trying to connect Xbox 360 to Internet using laptop with Windows 7, but am not finding the 'Share' button in the network connections and I don't have the ability to "bridge connections".

    Sorry about the long title, but it pretty much says my problem. I am trying to connect my Xbox 360 to my Windows7 laptop with the ethernet cable. I have a home network that the wireless laptop works out of. When I go into the control panel network connections section, I can't find the 'Sharing' tab that says that every tutorial I can find there should be. Tutorials can say to go to the screen that shows your wireless connections, highlight your home network and the network to your Xbox and then right click and press "bridge connections". I do not have the option for bridge connections. Can anyone help?

    After having connected the laptop and Xbox with an Ethernet cable, you should be able to enable sharing of Internet connection on the wireless network connection:

    1. Make sure that the two network connections are enabled.
    2. Right click on the wireless network connection.
    3. Click on Properties .
    4. Click sharing .
    5. Put a check mark in the check box under Internet connection sharing .
    6. Click OK .

    After you enable ICS, not bridging the connections. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Problem with Vista and XP computers Internet connection sharing.

    I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

    Thank you

    Oscar

    It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

    • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

    or:

    • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Cannot access internet when you configure with internet connection sharing.

    INTERNET HELP?

    I tried to use the internet connection to my wireless on my PC laptop not wireless using an Ethernet cable. I have connected my pc not wireless to my laptop wireless pc with ethernet cable, I did everything as requested on the site of "Dummies" and the PC says its connected but when I try to go on Internet Explorer, it does not work? HELP! : (PS) my PC is Windows Vista and my laptop Windows 7

    Hello

    1. While sharing was the Internet works fine before?
    2 did you change on your computers before this problem?

    I suggest you follow these methods and check.

    Method 1: You can follow the Windows Help article below and check that ICS is set up correctly.
    Set up a shared Internet connection using ICS (Internet Connection Sharing)
    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
    If ICS is not configured correctly, then you must post back the result by running the following command
    To do this:
    a. click the Start button.
    b. type cmd in the search box.
    (c) in the command prompt, you must type ' ipconfig/all' and check the result.

    Take a screenshot of the command prompt and post.
    To take a screenshot, you can follow this link below.
    Use capture tool to capture screenshots
    http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

    Method 2:  Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

    I hope this helps.

    Thank you.

  • Can someone help me with my problem on the Internet connection sharing?

    I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

    I am currently using windows 7. I hope some of you can help me thanks.

    It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

    Hello Fritz,.

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the issue.

    This problem may occur because of corrupted network drivers or incorrect network settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the network troubleshooting and check.
    Reference:
    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    If this does not help, use method 2.

    Method 2:
    Use the steps described in this article and check the issue.
    Reference:
    Wireless and wired network problems
    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

    Additional information:
    Using ICS (Internet Connection Sharing)
    http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

Maybe you are looking for

  • IPhone US 6 s in Germany?

    Hello I come from Germany and I think to buy an iPhone 6s in Seattle when I am there in August. My question is, it will work in Germany when I buy sim lock free? I heard that the United States use different frequencies of the mobile service that in G

  • Why Firefox 16.0.1 keep turn off my newest version of java?

    Pogo.com cites a security problem and a fix for Java. Oracle provides a version update. Mozilla disables this new version. Now, mozilla disables ANY version. Website of Oracle is unable to check the new installation of java. Oracle cannot check ANY v

  • Satellite L500 - hard disk drive partitioning

    Hi all (first posting times) I came across a little curiosity. Bought new laptop everything installed, then loaded into all the previous laptop backup files, brilliant all work...But then noticed was running out of space on the hard disk (drive C)? W

  • Mac IIci does nothing

    got a Mac iici for a storage shed and power he did not have a good view. I disassembled to get the dirt stuck under the logic board but after getting back together, it does nothing. Does not turn on fan and no sound. He just no longer lights! I check

  • Can I upgrade the CPU in my dv6-6112nr?

    I have 16 GB of RAM, replaced the HARD w/a SSD drive and want to replace the duo core i5 with something more powerful.  Is this possible?  Anyone has done, and if so, would you be willing to share information learned during the upgrade process? This