Why my IPad Mini has lost its internet connection?

Settings says my router is connected.  Computers are connected.  What could be the problem?  Thank you!

Restore network settings.

Tap

Settings > general > reset > reset network settings > reset network settings

Password and name of home network will be asked.

Tags: iPad

Similar Questions

  • Time Capsule has lost the Internet connection and DNS servers

    I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

    I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

    It may or may not be important to mention the following:

    1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

    2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

    I would be grateful for any advice.

    Weird how everything's going well for a few years and then crazy when you have something will change.

    El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

    Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

    You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

    1. I need to know what modem you are connected. Make and model please?

    2. the most important. What is the main router on your network or a modem?

    I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

    https://discussions.Apple.com/thread/6509420

    It is not so difficult... You just know where you're going before you start.

    Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

  • Photosmart 7520: Photosmart 7520 has lost its wireless connection

    Our photosmart 7520 used to print beautifully two laptops, but today it stopped printing at all and seems to have lost its connection to the internet.

    I tried to remove it from my system preferences, to reset, and when I tried to add it, it was no longer on the list of available printers.

    Hello @cornylouise!

    Thanks for posting on the HP Forums!

    I would be happy to provide you with assistance on the Photosmart 7520 and the problem of communication between 2 laptops.  If the printer is no longer being found by computers, then you can by looking at a slight problem of Wi - Fi.  The first thing I would suggest is the cycle of power cables to the printer and the router by unplugging the power for 20 seconds.  Once the devices back on then see if you can add the printer to laptop computers.

    If you are unable to find the printer then I suggest to restore the default settings of network on the printer and it reconnect to the wireless network.

    To restore the default settings of the network printer:

    1. To press the Wi - Fi icon at the top of the touch screen to printer
    2. Tap Settings
    3. Tap on restore default network settings and confirm

    To run the Wireless Setup Wizard:

    1. Icon press the Wi - Fi at the top left of the screen touchscreen printer
    2. Tap Settings
    3. Press wireless configuration wizard
    4. Select your network
    5. Enter the password and confirm it
    6. Check if the computer can find the printer again

    If please, after back and let me know how it goes!

  • Why my Kobo Glo has lost its permission to Adobe?

    I continue to post this question and it is not displayed on the forum, so here's one more time...

    My new Glo Kobo worked justfine with ADE and showed my authorization under account.  today I signed my Kobo account and re-setup of my camera, but now the Glo tells me that I am not connected to Adobe approval, and even though Windows recognizes the device ADE is no longer is grateful.  ADE is still recognizing my older Kobo wifi.  How to retrieve my authorization to Adobe for my Glo?

    SUCCESS AT LAST! But be careful.  And the problem is Kobo, I think.

    This time, before you do a factory reset or a reset, I uninstalled the Kobo Desktop of my computer application.  It had been earlier, on my computer from my old installation of Kobo Wifi and when I first set up my new Glo, the installation process caused Kobo website to download and install a copy on top of the old copy (same version as it turns out) Kobo desktop on my computer.  But the installation was not completely 'clean', I realized this time when the installation and configuration of the process AFTER uninstalling the previous one, has produced a few screens I had not seen before in the impure installation...

    This time, after you have uninstalled the software my computer Kobo, performed a rest of factory on the Glo and I then in the process of re-configuration.  It took a little longer than the first time, but once it ended, FINALLY Adobe Digital Editions the Glo has recognized and asked me if I wanted to allow it (Yes!).  After authorization, then I could copy all my files epub DRM of ADE in the Glo, and I checked that I can now read all.  Everything seems to be.  Some relief after the anger and frustration of the past 24 hours.

    Considering pain Kobo Desktop gave me (and the stuff's done horrible it to my app iPod content and mix up my shelves iPod with my Glo shelves without my inviting to), I decided that I will never use the Kobo Desktop again.  Later, when I buy something (good selection IMO) Kobo ebook site, I'll just download the DRM epub files, load them into ADE and ADE to transfer the contents of the Glo.

    I will censor themselves the language I want to use what is web and iPod app software Kobo... but I don't really like the GLO features, size and speed.  When it connects with ADE as he is supposed to...

    Thanks again for the suggestion and support.  I hope that others benefit from my account of what went wrong past and how I fixed it.

    BTW for Glo users: the problem began, not out of the box (which was perfect), but when I made the mistake to go into the settings and close my Kobo account, thinking I would reconnect when I needed to.  NOT THERE GO.  GLO said immediately that I had to re-setup of the device (why, just because I'm logged into my web account? I'll keep this screed for my email to the technical support of Kobo).  And that's where all the 'fun' started.

    Don't disconnect your Kobo account in the menu settings Glo and Kobo Desktop to avoid like the plague, when you have finished configuring Glo for the first time.  Do not synchronize with anything with Kobo Desktop; Believe me, you will wish you didn't (I learned this with my Kobo Wifi and iPod and it's even worse with Glo and iPod, city of nightmare on many levels I'm in because this isn't a forum of Kobo).  Do your installation of content via ADE.  It can be a nightmare when it goes wrong, but until yesterday ADE had been purrs like a kitten for me and still is today.  Until someone comes up with something better.

    Some software is OK to crush, and some software must always be uninstalled before you reinstall or install a new version.  Some software (such as Kobo) editors are really sloppy on do not make it clear which is the case for users.  An another barbed zinger as Kobo will get me in a day or two.

  • my laptop has lost its sound!

    I don't know why my windows xp has lost its sound, I go into the volume control and none of this is highlighted so here before, I can't change the settings please help

    Hi nicoladowler,
     
    -Have you done recent changes made to your computer after this problem started to happen?
     

    Follow the three steps solution given in the link below and see if it helps you fix the problem:

    No sound in Windows

  • My sisters thinkpad XP pro is unstable and it has lost its drive. I can reinstall using my xp pro disk and its product key?

    My sisters thinkpad XP pro is unstable and it has lost its drive.  I can reinstall using my xp pro disk and its product key?

    I fixed it!

    I couldn't work at all Internet Explore.  I finally installed Superantispyware from a USB pendrive and it ran in safe mode without network.  So I ran Malwarebytes and ccleaner.  After a reboot, everything works great again.  I could install Microsoft Security Essentials and get current updates.  After a smart defrag it turns really well now.

    I was able to make a recovery cd set too.  It will be just as good as if I he burned them on a new computer?  I mean can the data used to make these CDs get corrupted over time?  This laptop is 6 years old.
    Thank you for your willingness to help.
    MJ
  • A type of file has lost its association to open with Windows Explorer

    On my machine the XP Acronis True Image Archive of backup .tib file type opens with Windows Explorer and I see in the details of the files in the backup.

    On my machine the association used to be with Windows Explorer Vista, but recently the association has changed. I can't figure out how to restore it.

    When it is correctly associated, I can read files in Windows Explorer, but no more.

    When I right click on the file and select Properties, it gives me the ability to change opens with Adobe Reader, Internet Explorer, iTunes, Media Center, Notepad, paint, PowerDVD, RealPlayer, Windows Calendar, Windows Media Player, Windows Photo Gallery, Word Pad or browse...

    I was hoping to go to Windows Explorer, but I was not able to find it. Is it in a folder hidden somewhere?

    Hello David Reed Peterson,.

    Thanks for the return of the response.   Please see the link below to see if any of the listed steps will fix this for you.

    Windows Explorer has lost its "file Association".

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-Explorer-has-lost-its-file-association/1bd921e8-4747-4968-a7ac-5bfb4b48e32f

    If this started recently, have you tried a system restore to a point in time when it worked correctly?

    System restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Please let us know status

  • Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar

    Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar. My MacBook Pro is a mid-2012, 2.3 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR3 OS X Version Yosemite 10.10.5

    Graphics Intel HD 4000. Can anyone help?

    Thank you very much!

    Thai-Anh

    Reset NVRAM may solve it.

    How to reset the NVRAM on your Mac - Apple Support

    Or system preferences > sound, check on 'Volume to see the menu bar' to show the volume of the sound in the menu bar.

  • Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

    A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

    A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

    Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

    Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

    Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

    How connect to this printer?

    Try using the path UNC path of the printer in the Add Printer Wizard.

    Add a printer > network printer > connection to this printer ((deuxieme point)

    Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

  • I lost the internet connection, how do I reinstall

    I lost my internet connection to my Mini Ipad how can I reinstall

    Look for some troubleshooting steps based here.

    If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  • I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

    I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

    Debbie

    How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

    How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

    What error messages are reported?

    Event Viewer reports

    1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

    2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

    3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

    4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

    5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

    6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

    7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  • After that my computer remained at about 48 to 72 hours, he lost all internet connectivity, IE and Outlook, as well as other programs.

    original title: Internet connectivity problem

    After that my computer remained at about 48 to 72 hours, he lost all internet connectivity, IE and Outlook, as well as other programs. Before that, it works fine. If I reboot, it goes back to works very well for this period of time. I noticed I can shorten or lengthen the time that remains active of programs I run the application, primarily GOAL and iTunes. If I do not use one of the people, he can stay for about 4 days, if I use both what it comes down to 2 days.

    About 2-3 months ago, my computer started to do this. I've been troubleshooting on and outside since then, but as it was not any extreem yet I was not too concerned. However, recently the problem has progressed. It started with she it around every 7 days, so I could live with it. However, I do not restart my computer every day, so I'm hoping to solve this problem.

    Information system on this picture:
    http://I219.Photobucket.com/albums/cc280/God-follower/ComputerSpecs.jpg

    Thanks for any help or advice you can offer.

    Hello God-follower,

    Thank you for using the Microsoft Windows Vista Forums.

    When this happens in what concerns the loss of internet connectivity is able to reopen and close Internet Exporer or will you you will get the same result with an error?  I suggest go to the link below for Windows XP support and include information from above.  Thank you!

    Windows XP discussion groups:
    http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx
    James Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

  • When another PC on my LAN boot, my PC loses its Internet connection

    When another PC on my LAN boot, my PC loses its Internet connection.

    Do you have an error message on computers?

    This may be caused if you have configured the computer to use the same static IP address.  To see if this is the problem, follow these steps:

    With your computer connected correctly, follow these steps:

    Open a command prompt window (type cmd in the search box and press enter)

    In the black command prompt window, type the following command, and press ENTER after each line

    ipconfig/all > "% userprofile%\Desktop\ipinfoONE.txt".

    output

    Start the second computer and perform the following steps (which assumes that the second computer has Windows 7):

    Open a command prompt window (type cmd in the search box and press enter)

    In the black command prompt window, type the following command, and press ENTER after each line

    ipconfig/all > "% userprofile%\Desktop\ipinfoTWO.txt".

    output

    IpinfoONE.txt of copy on the desktop of the first computer to a USB flash drive and then put the flash drive on the second computer.  Use the second computer to answer here, then paste the contents of ipinfoONE.txt and ipinfoTWO.txt in your response.  Be sure to indicate in your answer given that go with which computer.

  • I lost all internet connections

    original title; I lost all internet connections and all attempts to repair did not do what I do?

    I lost all internet connections.  I tried all to solve the problem, but without success.  Is it at a certain level of the code that I should bring in a professional setting?

    Hello

    1. what attempts to repair did you try?
    2. don't you make changes to the computer before the show?
    3. What is the accurate and complete error message you get?
    4 are you using wired or Wi - Fi?

    Method 1
    I suggest you try the steps from the following link:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2
    I suggest you try the steps from the following link:

    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

    Additional information:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
    http://support.Microsoft.com/kb/870702

    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095

    How to set up a connection to the Internet in Windows XP Professional
    http://support.Microsoft.com/kb/305549

  • Gets the error message that says non-genuine Windows, also lost the internet connection when installing Windows 10

    Original title: windows 7 Home premium product...

    I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!

    Use your Windows 7 Home Premium product key to activate it.

    Windows 7 is pre-installed on my computer, How can I find the product key?

    The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:

    Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

    If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:

    Activate your Windows 10 license with Microsoft Chat support

Maybe you are looking for

  • Y430 overheating?

    Dear owners Ideapad Y430, I noticed recently that two plastic covers on the bottom of my laptop are not exactly straight. You can better see what I am referring to these images: HD plastic coverage Also, the cover is also high in only one of the part

  • Updates from Microsoft for Vista

    When Microsoft implemented to date are displayed for me to download in my Vista program... these updates take MB of space on my computer?

  • Structure of the files for stick manual

    So I finally gave up trying to use Windows Media to get music on my Zip Clip - especially the external card to 32 GB. What kind of directory structure I need create a manual copy? I would like at least to divide music into categories such as 'blues',

  • Event M18x R2 Win 8.1 Pro x 64 0, monitor SIMG Service error

    I finally decided to full wipe and a clean installation of Windows Pro 8.1 x 64. All the seeds well but every time you start (cold start or reboot), I get an error in the Windows Event Viewer '0, monitor SIMG Service error event' with the information

  • Matching records between 2 tables with duplicate records

    Hi allI need help in what follows.I have 2 tables Received_bills and Send_bills.--------------------------------------------------------The DOF for Table SEND_BILLS--------------------------------------------------------CREATE TABLE SEND_BILLS(DATE O