Why my iphone 4s are on the voice-over in itself?

Similar Questions

• Audio level of the Voice-over element does not match level of audiometers

  I speak in my external USB microphone and create an audio clip of the voice-over. The audio level of the clip is too low - the voice is too quiet, so I climb the audio level in the clip.

  But it still sounds too low, especially on the meters, which are reading down below-12. So I try to push the audio level of the clip all the way to the top. Now, in the clip, the tops of the audio track are red and are cut.

  But out there on the meters, it's another story. Counters show no break at all; in fact, they show the audio level between-6 and 0, which is where I want it to be. And the voice and the words sound very well in my helmet - I can't detect any cutting or other abnormalities.

  So what should I do, leave audio level of the clip pushed all the way upward, with the red list of the peaks and cut and go through the meters, which show that it is very good?

  Who should I believe, warning of the audio sound is distorted or indication the meters that everything is good with the fact that it sounds good?

  Tom B.

  Occasionally, I had this problem.

  The actual meters seem to stop at 0db and never go higher despite the audio tracks, display of the peaks above 0 dB.

  Try to play the clip/s in question backward.

  I remember that DV is an offender of this audio oddity.

  Can you tell us what are the specifications of the clips?

  As much as I know this problem is not resolved.

  Al

• Why my iPhone does not read the persons name and 2 others?

  Why my iPhone 5, when my mom calls it reads MOM and 2 other caller on the screen when it's only my mother?

  Your MOM share the phone number that calls with other people in your contacts list?

  Or if she shares his Apple ID with others?

• full waveform graph to calculate the area under the curve over time

  Hello

  If please find my attached VI and help me please for integration to get area undercut for my chart of waveform.

  I would like to find my wave power wind energy production chart oever within one month of time.

  I think I have to integrate to get the area under the curve and so I m now using tool integrated into labview attached.

  As I did not wait years for my result and so I want to make sure that the tool that I m using is correct.

  Please advise me what method I will use for my chart.

  Dominique says:

  I would like to integrate my table of power over time (table of power is on each interval of a minute) and the entire graph is one month. So, I'll put dt = 1?

  You put dt at some units you want in the final result. If you want Wh, you want dt in hours. If the spacing is currently a minute, you can express in fractional hours and use the result as dt. Try dt = 1/60.

• Joining the voice over to after effects project

  Hello

  I am very new to the legacy so far am master the basics with keyframes to adjust the opacity, position etc. I'm pretty happy with what I've created so far on my project, but now I would like to record a voice on my video.  I know I can create a voice on track in audition, but I would like to see the preview of my video while I address to I can me right time etc..  I've always done very easily in iMovie.

  Can someone point me in the right direction please even if it means a glimpse of my audition video.

  Thank you

  The way you want to do, it's a little backwards for AE.  The most common way of working is to import an audio file of the voice and then animate the VoiceOver using as reference.

  So I would recommend just record the voiceover, import into AE, then adjust your AE animation.  It should not take long.

• Why my iphone is connected to the Iphone of wives?

  all applications, mail, whats app a trombinoscope are the wife and not mine

  Probably because you share an Apple ID. An Apple ID is a personal identification - all devices that share the ID will share most of the content. You must have separated from the Apple ID. You can then link them by a family sharing.

• Why convert? What is the advantage? Why convert it before you send the data over the network?

  Hello everyone.

  I have a question quite simple and intuitive. Yet Google does not seam to get the answer.

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  I've been curious about this for a while and have yet to find an answer. Any help is appreciated.

  Thank you
  Taylor S. Amarel

  tsa256 wrote:

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  It really depends on the specific situations.

  For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.

  This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.

  As to why the data was not the correct data type in the first place, it is sometimes inevitable.

  A few examples

  -What happens if you just read a text file as a long string.

  If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)

  -you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.

  You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.

  tsa256 wrote:

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  Somehow, this is my first response, but in a more general sense.

  Many functions down to the level of the OS run in binary.

  If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.

  Two conversions on each side of the transmission add unnecessary delays.

• Filter to show only images that are within the project pro first itself offline?

  I tried to google I can think, all directions and results are always "how to add a link to the files offline in the first" so this isn't my problem.

  In After Effects, there is a trick very convenient to type "missing" in the search prompt in the project Panel, and it will show you precisely all assets being referenced by AE offline. I looking for this kind of feature in Premiere Pro CC 2014 (I don't have not yet went to CC2015 I'm nearing completion on an important project).

  The challenge that I face, it is a huge file (feature documentary) with literally thousands of assets which has many sequences that have endured many iterations. And even if I don't get a "media is offline" WARNING when I OPEN the file, I get a warning of "material offline is present in this export and will be encoded using the chart of media offline" whenever I have to export. I'm trying to see if there is a filter that will show me ONLY the offline files that are always reference by Premiere Pro so I can remove it, because throughout most of them are likely obsolete.

  Any help out there?

  

  There is an option in the metadata view to turn on hardware offline.

  Click on the Panel of the menu of the project for metadata display window...

• Audio interface for the voice-over

  I need proven suggestions and work on what type of interface I can buy that will allow me to do the voiceovers directly in Prem CS5.5 Pro on a Mac Pro

  I need to be able to use the balanced TRS or XLR cable. I have been using an M - Audio Fast Track Pro USB but interface for some reason, the Prime Minister doesn't.

  Thank you.

  Mac uses Core Audio Asio. The Fast Track Pro should be fine on the Mac with first. What are the audio settings under OSX?

  Eric

  ADK

• Length of blackBerry Smartphones to the voice note, auto cut to 90 seconds!

  It was fine on my curve, but now I have a Bold 9780 and notes voice cut off after 90 seconds, how to record a voice note longer?

  It's probably a setting within the voice Notes app itself... When you have this opening, press on the and select Options, settings or whatever it might be. There should be a place to specify the storage location of the recorded notes.

  Sorry, but I don't have your exact model to try with... so you'll need to dig a little to find it. If you provide your exact model number and level of the OS, I have a simulator that I can run to see if I can reproduce the steps... but, what you said is 'Bold 9780"to the top, but no mention of the level of your operating system:

  • KB23393 How to check the model number and the version of the BlackBerry device software on a BlackBerry smartphone

  Good luck!

• the voice on the recording stops immediately after starting

  Hello

  I am a novice user of Premiere Pro.  I just started working with voice recording.  I did the whole upward as I understand it.  When I start recording, he immediately "finished" and stop recording, as if the record button is not "switched" on.

  Here's a clip showing my problem, I hope it's clear.

  0113.02.premiere pro troubleshooting. VoiceOver finishing immediately on Vimeo

  Thank you in advance,

  Travis

  The Voice over function looks like the faster and easier.

  Well, as you have now done using a Zoom, I'm not sure that this is the case.

• Voice Over - Narration

  Hi all

  I am trying to learn how to do the voice-over.  I made a short video to show them what I know so far.

  http://screencast.com/t/YTkyMWFhOG

  Any help will be greatly appreciated.

  Thank you

  Robby

  

  Yes, I meant the same thing on 'Activate' and 'enable '.

  To add a track, go to the sequence in the timeline panel, place the pointer in the left of any track emty space, right-click and select "add tracks". In the drop-down menu for audio "track type", select "mono".

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Why no iphone 6 and iPad (mini and Air2) capital at the beginning of the first word in the search bar of Safari

  Why no iPhone 6 and iPad (Mini and Air 2) not capitalize first letter of the first word in Safari on the search bar?

  Web addresses contain no capital letters, nor do email. If looking at you any new credit card and it says to activate this card go to www.CardnameService.com/Activate, their meaning is www.cardnameservice.com/activate. It's the same thing.

  The above examples are that of the examples.

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage