Why my iPhone does not recognize when plugged into iTunes?

Similar Questions

• Why only a helmet does not work when plugged into my macbook pro?

  I have a macbook pro 2012 middle and when plug my headphones in the headphone plug-in, and only the left earpiece works. Ive tried several types of headphones, all with the same result and then tried in my iPhone and they work fine. Any suggestions would be greatly appreciated!

  The sound balance is set in the sound preferences, right (in the Middle, I mean).

• DeskJet 3632: Does not work when plugged into the laptop

  When my printer is not plugged, it is all set up and ready to print. But when I plug it into my laptop, the button just flashes, all other buttons are not on and the screen is blank as well as this, it is not picked up at all of my laptop.

  If anyone has an idea why it continues to be please help! Thank you

  Hi @Jademercer,

  Thank you for joining the HP Forums!

  I understand that you get a white screen and the button flashes with your printer HP Deskjet 3632. I'm happy to help you!

  Are you able to print a test page without the printer being connected to the computer?

  Print a test page to make sure that the equipment is working properly.

  1. Make sure that there is no US letter or A4 size, unused, plain paper in the input tray.

  2. Press and hold the power button / , then press the Cancel button .

  3. Release the button cancel, then the power button.

     The test page will print.

     Figure: Example of a test page

     

  In the meantime, please take a look at this guide, the lights flash.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• Why my iMac does not recognize my scanner 1600 epson perfection since the upgrade to ElCapitan 10.11.4?

  Why my iMac does not recognize my scanner Epson Perfection 1600 since the upgrade to ElCapitan 10.11.4?

  First try this: reset the printing on your Mac - Apple Support System

  If this fails, you can try this driver: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14577 & infoType = Down load

  

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• Msconfig does not start when typed into the starting box?

  Msconfig does not start when typed into the starting box?

  Original title: windows

  What is the listed program in 'C:\Windows\System32' if you look in Windows Explorer?

  If this is the case, it starts if you click on it?

  Update your anti-virus software and run a full scan.

  Then download, install, update and run a full scan with malwarebytesfree. (Keep free, no need to enter in any trial etc.).

  Then run a sfc/scannow to see what that brings.

• Why my iMac does not recognize my new iPhone 6?

  I have a new iPhone 6. When I plug it into a USB port on the back of the iMac, it does not recognize the phone. What can I do to fix this?

  Hello. Try methods of troubleshooting here: If iTunes does not your iPad, iPhone or iPod - Apple Support

• Why my Bank does not recognize my computer whenever I connect, and this only happens when I connect with Firefox not other browsers

  I connect to Bank and firefox remembers my account #, but when the next screen appears the Bank does not recognize my computer. Each time to answer the correct security question, I check the box to remember as a personal computer, but he never does. This only happens when I use Firefox, not other browsers. Other browsers don't forget Acct and that it is a personal computer.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  We hope to hear from you soon.

  I wouldn't store any bank information on your computer for various security issues.

• Why my computer does not recognize the CD when inserted?

  I am trying to install a software on CD, but the computer does not recognize it.  I tried even my audio CD but they is also not recognize it.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?

  

• Why the device does not recognize QR codes?

  Why the Apple device on the products Apple (iPhone, iPad...) does not recognize QR codes?

  You need an application, like the QR reader

  https://iTunes.Apple.com/app/QR-reader-for-iPhone/id368494609

• iPhone does not appear when connect you to the computer

  I use iPhone with iOS 9.3 6, recently I upgraded my iTunes to version 12.3.3.17 (64-bit) and my computer is running on Windows 10 Pro (64-bit).  After the upgrade, when I run the iTunes, my iPhone does not appear.

  I tried the following: re - install iTunes, stop and restart the Apple Mobile Device Service, remove the Lockdown folder, but still, my iPhone is not recognized by iTunes.

  Any suggestions to solve my problem?

  You have a third party Virus Scan running on the computer?  Sometimes it can get in the way of communication between iTunes and the phone, especially after an update to iTunes.  Try disabling the antivirus scan and see if the phone appears in iTunes.

  Other devices work on the same USB port?

• Why my XP does not recognize a Toshiba 500 GB USB external drive... it does not appear in disk management or in computer

  Bought a new Toshiba 500 GB drive external usb.  My XP desktop won't recognize/find this disc.  It does not appear when you view the disk management or work station.  I also have it on my new laptop (Vista) and it has been found immediately.  My research online only tells me to find the external drive in disk management and assign a drive letter to... but I don't think to assign a letter! Toshiba says that the drive is compatible with XP. I have another smaller disk capacity that work perfectly on the XP machine.  Please tell us what should I do to have my Office XP recognize the
  is the new external hard drive.  E-mail address is removed from the privacy * or * address email is removed from the privacy *.

  Three things that you have not yet mentioned are

  1. don't change you the registry suggested by the KB Article (see: a computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive)?  I suggest do it manually instead of using the FixIt.

  2 represents the drive recognized in the Device Manager (start > run > devmgmt.msc > OK)

  3 is the drive recognized in your BIOS (press the corresponding key on startup).

  Reformat to FAT32 was probably not necessary (and you'll probably want to re - format to NTFS before use).  XP has no problem with large (> 500 GB) external USB drives.

• Why windows 7 does not recognize my blu - ray player

  I upgraded fron vista to windows 7 and now when I put a blu - ray disc

  1 it will not play

  2 it does not recognize the drive

  If it's a movie/TV Blu - Ray disc, then Windows 7 will not play it unless you install 3rd party software/codecs. These can be either purchased or there are those who are free available.

  Check any software initially provided with your PC of any media player grouped as those of Cyberlink or Arcsoft.

• Why the mouse does not disappear when captions are turned off?

  Hello!

  My owner like apparently not captions when I record my demonstrations, so I have disabled this option when I capture from my demo. However, I discovered that my mouse movement does not capture when the subtitles are disabled, which means that I have to activate the mouse for each slide. It's more annoying than catastrophic, but no one knows why this is happening and how can I prevent? I checked that "capture the mouse" is selected in the recording preferences. I even turned off and back on, nothing works. Is this a bug or user error? (I'm leaning towards option B).

  Thank you!

  Krista

  Hello

  I am at a total loss to explain why it happens. Have not really noticed myself.

  However, I might be able to ease the pain a little.

  I'm not sure it will work, but it can. After you save, select all of the slides in Storyboard mode or in the film. Then activate the mouse for each of them at a time. This part should work. I'm not sure, what if the movements of the mouse will be selected on registration. It may end up when the mouse is there, but you need to reset the coordinates for each slide. Ick!

  In this case, you could take a different point of view.

  Export captions as a Word document. Change the Word document and delete all the text in the legend. Then import them into empty on all of the legends. Then mount a legend and configure it as a transparent. The apply to all allows you to configure all the other legends in this way. It would still be there, but would be invisible. Can be less painful that way.

  Be sure to report the problem of mouse as a bug! The link is in my sig line.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks