Why my iphone4s connects to my wifi? He stopped abruptly. The switch has greed out and will not go.
WWhy won't my iPhone 4s to connect to my wifi at home? The button is grayed out and will not go.
It is often an indication of a hardware failure. Try to restore it in DFU mode and set up as a new device. (do not restore the backup again. This is a test)
If that doesn't fix it, make an appointment at the genius bar to your Apple store. You will need to either replace, or buy a new phone.
Tags: iPhone
Similar Questions
-
Firefox will not open - 4 times this week he froze and crashed and I have to disable my internet connection, then re add before this will work unless I can fix this quickly I going to chrome
have you tried full uninstall and clean install?
-
Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions
Hello
Thanks for posting your question in the Microsoft community.
I understand that when you try to connect to the Internet, he says at the outset that Internet is not responding and then after some time to connect. Let us know if this is incorrect.
It would help if you could answer these questions.
a. what version of Windows is installed on the computer?
b. don't you make changes to the computer before the show?
I suggest you check out the link and follow the steps.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet
Let us know if you need more assistance.
-
I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?
This page opens another page in a frame.
In such a case, you cannot make an exception.This server does not send a certificate chain that ends with a built-in root certificate.
You can open this page in a tab to make it possible to create an exception if you really need access to the site.
Note that storing a permanent exception should not be.Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:
- chrome://pippki/content/exceptionDialog.XUL
In the field location type and paste the URL of the Web site
- retrieve the certificate via the button 'Get certificate '.
- inspect the certificate via the "view..." button. »
-
I click and drag the music a new reading list, but some songs are not highlighted in the play list and will not play on my device. Why?
Try two things...
(1) the songs greyed out can be unchecked. Uncheck the songs are normally excluded from track to track synchronization and normal. With the help of the songs or the list view Ctrl + click on an empty box to check all the boxes in the list of active reading.
(2) try to go to file > library > Update music library to iCloud and do the update.
-
Why can't I download apps? It remains on "buffer" / operation circle and will not start download
See if the Restrictions are enabled > usage on your iPhone Restrictions
If it is not a question of Restrictions, it could be a problem with the network settings on your iPhone.
Tap settings > general > reset > reset network settings
You will need to re enter your Wi - Fi password. Tap Settings > Wi - Fi
Then try to download apps.
-
My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!
Hi Kareyfabela,
For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/
I hope this helps!
Jonty
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
I can't windows to stop coming on and asks me to install the desktop business drive. It starts as soon as I connect and will not stop, interupting everything what I do online
Hi marcus,
1. What is the full error message that you receive?
2. have you recently trying to install a program on the computer?
Method 1
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you perform a clean boot and check.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 2
If the previous step fails, then repair Microsoft office on the computer and check if it works.
How to understand the repair feature in Office 2003 and Office XP
http://support.Microsoft.com/kb/822238
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello, I'm having intermittent problems with logging in my Windows 7 computer.
Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:
"The service user profile Service has no logon. The remote procedure call failed and did not execute. "
When I click 'OK', the machine disconnects and try to restart. This can occur 2 to 5 times before _works_ . But sometimes it happens at all. And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.
I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others. This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.
However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly? Where I can look in the logs of Windows, to provide relevant information on this subject?
Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.
I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.) I'll give it a few more weeks to be sure.
-
Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine. Any ideas?
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is the instance of Vista installation.
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads
Adjust settings, manage user accounts.
Try the Forum above to repost, if necessary.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: Auntie Photon
Hi all
I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.
Help, please.
Hi Varun,
Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.
Please help me with the following information related to this issue:
- You have installed the required software on your computer which came with Auntie Photon?
- Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
- Press Windows Key + X.
- Select Device Manager.
- Check if there is no error or exclamation point under Auntie Photon.
This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.
Please follow the steps mentioned below:
Method 1: Run the hardware troubleshooter
The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.
- Press Windows key + W on the keyboard.
- Type the Troubleshooting in the search bar and press Enter.
- In the Troubleshooting window, click show all in the left pane.
- Click hardware and devices.
- Click right on material and devices and and select run as administrator.
- Click Next and follow the on-screen instructions to complete the process troubleshooting.
If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.
Method 2:
Note: Make sure that the Auntie Photon dongle is plugged.
Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:
- Press Windows key + X on the screen.
- Select Device Manager.
- Expand the network adapter and right click on driver and select Uninstall.
- Restart the computer.
- Windows will automatically load the drivers.
Step 2:
You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.
Windows Update: frequently asked Questions
You can also get in touch with Auntie Support and check the updates to driver for Windows 8.
Please answer us on the State of the question to help you further.
-
Hi, I keep getting a message on my task bar that says I need to update my Microsoft account password. But whenever I have it try says there is an error and will not take my password. I can't connect to my outlook to check the mail of Mr. I already tried to change my password, but even with the new password I get the same results. Help, please! Thank you!
Hey Kevin,
If the issue that you are facing is everything by signing to Ebay, I suggest you to contact the Ebay support for assistance.
Please see the link below to learn more:
http://pages.eBay.com/help/account/contact-customer-support.html
If you need help with Windows, get back to us, we will be more than happy to help you.
Thank you.
-
I need help, Photoshop update on creative cloud. It says error and will not tell me why I can not download
Hey King,
Try to download the app from the link below:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
You can also view error download or update Adobe Creative Cloud applications
Kind regards
Sheena
-
Por that TR pago my a my con mi tarjeta VISA no puedo use el programa? Me as EL PERIODO DE PRUEBA HA CADUCADO?
Why if I pay every month with my VISA card I can't use the program? Said THAT THE TRIAL has EXPIRED? and I pay every month!
Telefono del servicio customer service numbers support Adobe tecnica in todo el mundo y
País/región Attention to the client Norteamérica EE. UU. There Canada 800-443-8158. Europa Austria 6950071855 3 option BELGICA 027 119 960 3 option Dinamarca + 45 38 322 914 option 3 Irlanda + 353 (0) 1 242 1552 option 3 Finlandia + 358 (0) 969 379 671 option 3 Francia 01 71 23 01 96 option 3 Alemania 6950071855 3 option Italia 02 6 968 2817 option 3 Countries Bajos + 31 (0) 20 201 3331 option 3 Noruega + 47 23 16 28 81 option 3 España 900 810339 option 3 Suecia + 46 (0) 858 536 692 option 3 Suiza 18009581 3 option RU + 44 (0) 207 365 0733 option 3 Asia/Pacífico Australia 1800 614 863 China 58657700 010 Hong Kong 30714922 India 0124 4003810
000 800 440 1751Indonesia 001 803 447 361 on 03-5350-0407 Corea 02 563 2555 Malasia 1 300-80-0027 Nueva Zelanda 0 800 485 948 Filipinas 180014410440 Singapur 800-448-1642 Taiwan 0800-666-536 Tailandia 001 800 441 8813 Otro + 632 636 8450 Latinoamerica Argentina 0 800 444 0290 Brasil 0800 8921704 El Caribe 206-675-6100 Central America 206-675-6100 Chile 1230-020-0109
206-675-6100Colombia 01 800 5 1 80102
206-675-6100Costa Rica 0 800 011 0910
206-675-6100Mexico City 001 800 249 1039
206-675-6100Sudamérica 206-675-6100 Venezuela 206-675-6100 Africa South Africa + 44 (0) 20 7365 0733
Maybe you are looking for
-
Need info on GPU on Satellite A20-S103
Hello I have a Toshiba Satellite A20-S103 and I'm looking for a graphics card. I don't know what is the brand of card, Board is Intel, independent, I don't know, please tell me what is the card. Thank you Message was edited: assignment has been trans
-
Drive necessary recovery for Tecra M4 (PTM40E-OFG0287K)
Hello I need a restore disk for my * TECRA M4-PTM40E *.It is no longer available for sale of Toshiba, so I hope that someone here has a copy I can buy. I look forward to your responses. eX
-
My Windows XP start up of page and all applications (such as my e-mail address) are stretched horizontally. I tried to go into the properties of my Start Page tab and ' reset '. After the computer restarts, no changes took place. What should I do?
-
I have a HP Deskjet 3522 e-all-in-one series printer. I'm connected wireless to a laptop. I can print from the network to the printer. Can scan from the printer to the computer?
-
I'm running 10.5.2 CUCM. I configured a pickup call and added a few people in it and I am able to call pickup at this group from any other person in the group. The problem is I want microphones calls this group of someone outside of this group by u