Why my laptop wireless computer connect to the internet first thing in the morning and late at night, but not during the day.

Similar Questions

• Internet connection is unreliable - when a wireless computer connects to the network, all other stands and the router needs to be reset

  I have a home wireless network with a new router Belkin (no separate modem). There are four laptop computers in our House, which connect to the wireless network. One of them is Windows 7, both Vista and the other is XP.

  Sometimes the internet works perfectly well and all four laptop computers are able to connect simultaneously. But more often... when a new laptop is on and attempts to connect, all current laptops get kicked out of the network all together and are unable to reconnect. The network broadcasts always and appears in the list of available networks, but we are unable to connect.

  Other times, if my roommate is very well on the internet and I turn on my laptop, I can't see even the network, despite the fact that it is to use! If I turn the router off and on again (sometimes we do this several times) it works OK again.

  Sometimes this happens several times a day, other times we go days without having to reset. The problems are more frequent when the old Vista laptop is used which is what made me think it may be related to computers (or their settings) rather than the router.

  Thank you

  Alex

  You may need to check every laptop and the router, to be sure.

  Go to the website of the manufacturer of your Belkin router > make sure you have the latest Firmware for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8, how to print off laptop? Computer connected to the Deskjet 842 C.

  I have prepared a letter on the Notepad, but unable to print using windows 8.

  It gives a message that it can only print apps.   What can I do?  Phil

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing some printing problems.

  This could happen due to some compatibility problems.

  I need some information.

  1. What is the exact error message you get?
  2. Did you change your computer before this problem?

  I suggest putting your default printer and check if that helps you.

  Set or change your default printer

  http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printer

  Hope the helps of information. Please let us know if you need additional assistance, we will be happy to help you.

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• Why my computer connects to the wifi via time capsule, but not my iphone, ipad or smart tv?

  Yesterday, there was an internet outage in my area. Eventually he returned to the top, but I could not always connect. I phoned by internet service provider and finally they got it working, except now my computer connects to the wifi, but my iphone, the ipad and the smartTV won't. I use a time capsule to connect. Help, please!

  This modem do you have? Brand and model please.

  It is configured as a router or bridge?

  There is a good chance that the TC I messed up in the trouble... It happens.

  Back to the factory and repeat installation... no file is lost it doing.

  Who is your ISP? What kind of services to wide band?

• my laptop won, t connect to the internet more without the ethernet cable, help attatched

  As I, ve said it won, t connect unless the cable is connected.

  I had to change the password for internet security to allow my new Apple iPad access to the internet, 3 days after my laptop refuses to connect to the internet.

  I, made the change of the password in my laptop security settings, but after I pressed ok, apparently the password returns to that of origin and isn, t recognized. Can someone help, please

  Hello

  Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

  From the description of the problem, it seems that you have difficulty to connect to the internet without Ethernet cable.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2 did you do changes on the computer before the show?

  I suggest to follow the steps in the article mentioned below and check if that helps.

  Why I can't online?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-get-online

  You can also see the following article for more information on Internet connection problems:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

• The internet connection on my laptop and other portable device, but not in my office.

  Data sheet:

  -Windows 7 Ultimate 64 bit

  -All browsers and devices are up-to-date.

  Questions:

  I have this problem since yesterday and I tried to solve this problem since.

  The problem is that on my connection (WiFi) network, it says I have access to the internet, and of course it does because I can use internet without problem on my laptop, iphone and other portable device, but not in my office. It says I have an internet connection and when I ping a browser it answers correctly and it gives me all the Member States and other information.

  When I troubleshoot it it gives me something like "your computer seems to be configured correctly, but the device or resource (www.microsoft.com) is not responding." I thought it was a DNS problem so I reset everything, but no luck. Here are things I tried to solve this problem.
  -Reset TCP/ip using cmd.
  -Check if the IP is obtained automatically.
  -Check if I'm using the proxy server.
  -Rebooted (reinstalled windows)
  and many other things that I have searched on google
  But these proposals did not fix the problem.
  Here is my IP config
  
  
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: Genie2Stonk-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-17-D1-F7

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-17-D1-F6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1d3f:8912:70e:57e5% 13 (Preferred)

  IPv4 address: 192.168.1.3 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: December-01-12 01:45:01

  End of the lease...: December - 02 - 12 01:45:06

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 208184260

  DHCPv6 DUID customer...: 00-01-00-01-18-4A-2D-A4-64-31-50-35-E9-3F

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {40B4470F-DE12-452A-ADBA-A425B5329C34}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:1419:b1f:3f57:fefc (preferred

  EXEs)

  Address IPv6 local link...: fe80::1419:b1f:3f57:fefc % 12 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  C:\Windows\System32 >
  I can't understand what I've tried so many things and nothing never gave me a connection back Please HELP.
  If I need to provide more information please let me know.
  Thank you.

  Hi zinx2op,

  Thanks for posting your query in Microsoft Communities. The description of the problem, I understand that you are not able to connect to the WiFi of the desktop computer. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  ·         If it works well before?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance.

  Thank you.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  Most OEM computers have a partition on the hard drive, that allows to give it bought as provided.  Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup.  Look quickly at the first screen that appears, and you could see the key that you press.  Otherwise, go to your computer manufacturer's website and download the manual for your computer.  Instructions must be there.

  HTH,
  JW

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

  I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

  It seems to work now, so if my emails get screwed up again, I'll take your advice... don't understand why he sends now and am not asking my password as it does... but I don't want to do something that I don't know if it's working now... What do you think?

• My computer says my windows is not authintic but I know that this is what is wrong. I have on my another desktop and it works find but not on my labtop. It was working fine before.

  My computer says my windows is not authintic but I know that this is what is wrong.  I have on my another desktop and it works find but not on my labtop.  It was working fine before.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I bought Photoshop Element online 19/01/2015 and have AD015439775 number, but not the serial number.  How can I get the serial number, please?

  I bought Photoshop Element online 19/01/2015 and have AD015439775 number, but not the serial number.  How can I get the serial number, please?

  Using redemption code

  Mylenium

• Windows 8 portable computer connects to the wireless network

  Details of the first computer:

  New laptop: Samsung series 3 - NP355V5C-A03CA
  Wireless network adapter: Qualcomm Atheros AR9485WB-EG
  I got this laptop this morning and have been unable to get it to connect to my network wireless at home.
  I receive the notice to "Check network requirements", and then the notice it can not connect to the internet.
  He never asks the password. I added manually the wireless network and which makes no difference.
  I followed the suggestion of /every/ in solving problems, even those who do not seem to apply, just in case.
  I tried to install the older drivers for the Ondaaah, I installed not official. I ran Windows Update twice, installed it, still nothing.
  I'm pretty computer, but it becomes for me. I googled to the ends of the internet, I have tried different things for four hours, and it does not work.
  I tried at my aunt's House and it worked, but it does not work here.
  I rebooted my router several times and been updated, nothing. At home I have a network WEP, 802.11 g
  What else could be missing? Everything connects to home without any problems, just this new laptop has a problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  It appears from your description, that you are unable to connect to the network using Samsung series 3 - NP355V5C-A03CA portable wireless.

  I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  3 have you tried to connect to a wired connection?

  I suggest to follow the steps below and we update on the State of the question.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Computer connects to the network wireless as "local only".

  I am running Vista Home Premium SP2 on a HP Pavilion laptop.  I've never had any problems to connect this machine to a wireless network before, in hotels, at home, or anywhere.  My current home network is a modem - cable-> wireless-> wireless netgear n300 router.  My laptop connects to the internet via the modem cable directly or a wire from the netgear router.  I have a second, almost cell identical (it's intel, while the one who does not is AMD) which connects to the network wireless without any problem.  Two iphones connected wirelessely without any problem.  My HP laptop is the only one who refuses to connect to the internet.  Connected to the wireless network, it has access "local only".

  I tried the solution in this article: http://support.microsoft.com/kb/928233

  The question does not seem to receive an ip address, the computer receives an ip address.  I have disabled the IP v6, ran the norton removal tool, because I only had to a point and tried all other suggestions in these discussions: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be and http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/bc08f0e7-49a9-4458-9e0e-149b2df362ec.  I've uninstalled and reinstalled the adapter and all TCP/IP and network protocols associated with it.  I am at a loss and would welcome any ideas.

  Here is the result of the command ipconfig / all:

  Windows IP configuration

  Name of the host...: Arrakis

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-1E-4C-B2-32-BC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.5 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Wednesday, 28 April 2010 21:40:55

  End of the lease...: Thursday, April 29, 2010 21:40:55

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: NVIDIA nForce Networking Controller

  Physical address.... : 00-1B-24-FA-DA-80

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {31C080CE-FE0B-4D50-B734-C782C9A25FBC}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {B198B0D3-B70A-4E3E-858D-9774C414EECD}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  If anyone has this problem, it has been resolved by rolling the security settings on the router WEP.  I got the answer from the support client netgear.

  Amazing how two iphones, another laptop with XP and a laptop running Ubuntu Linux all about them without any problem, but wouldn't connect Vista laptop.