Why my network drives mapped reconnect when disconnected from my laptop?

Similar Questions

• How to remove network drives mapped Windows 7.i can't get to delete.pls help me to solve it.

  How to remove network drives mapped Windows 7.i can't remove. Already disconnected, but still its disk showing with red cross.i am not able to create new drive with the drive letter of Red Cross, pls help me to solve it.

  1. open a command prompt.

  2 in the command prompt, type the following command and press ENTER.

  NOTE: replaced by z: in the command below with the actual drive letter of the mapped network drive that you want to cancel your computer window (deletion) mapping .

  • NET use Z:/delete

  3 when finshed, close the command prompts. So the mapped network drive shoud be removed from the window of your computer.

  Kind regards
  J Chambers

• Windows 7 x 64-network drives mapped disappeared following updates

  Since this morning, all network drives mapped our Organization have disappeared.  More than 85 users being affected.  By a process of elimination, we have reduced the problem to local machines running Windows 7 x 64.  We have also several PCs 10 Windows which are not affected.  We have also two PC of Windows 7 that have not activated the Windows updates, and both have no problems with the drive mappings.

  We go through the deletion process of upgrades that were completed this morning (03:00).  I will provide an update as soon as we find the root cause.

  Can we get some guidance as to a specific update that can affect the drive mappings?

  UPDATE 2 *.

  We have solved this problem by uninstalling the following Windows updates:

  Update for Microsoft Windows (KB3139923)

  Update for Microsoft Windows (KB3140245)

  Update for Microsoft Windows (KB3162835)

  Update of security for Microsoft Windows (KB3159398)
  Update of security for Microsoft Windows (KB3161561)

  (After removing these updates and reboot, it should also ask users to close the session and sign in again until the mapped drives returns.)

  REF. https://support.microsoft.com/en-us/kb/3163622

  "Symptoms."

  All the user group policy, including those that have been filtered on security groups or user accounts, or both, security may not apply on computers joined to a domain. This problem may occur if the Group Policy object has the read permissions for the authenticated users group or if you use security filtering and lack read permissions for the domain computers group.

  Resolution

  To resolve this problem, use the GPMC Group Policy (GPMC. MSC) and follow one of the following steps:

  • Add the authenticated users group with the permissions to read on the Group Policy object (GPO).
  • If you use security filtering, add the computers group to the domain with the read permission. »

  -------------------------

  We solved this by adding authenticated users to the scope of the Group Policy object.

  (KB3159398 seemed to be that the cause)

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• Windows logon fails when network drive mapping

  I can no longer map a network drive of my laptop Vista business to my PC (XP).   I enter a username/password valid name, but I still not unsuccessful logon.   I read a gazillion discussions and have made the change to the recommended without result SECPOL tool.

  What makes me mad, it's this used to work!   I recently had to physically move the PC (renovation of the kitchen) and perhaps its something stupid like a missed connection.  Yet, I have access to the internet very well.  I can ping 192.168.0.3 192.168.0. * I'm confused comment.3 is affected. My tivo est.4 and I tested this connection and that's fine.

  I even had a network printer set up works very well: Photosmart \\192.168.0.3\HP...

  The only area involved is WORKGROUP.   I created an account "lapguest" on the PC specifically for this purpose

  I forget some syntax?   The GUI said essentially the same thing.

  C:\Users\Wendy>net use w: \\192.168.0.3\pcc * / USER: WORKGROUP\lapguest
  Type the password for \\192.168.0.3\pcc:
  86 the system error occurred.

  The specified network password is not correct.

  C:\Users\Wendy>net use w: \\192.168.0.3\pcc * /USER:\\192.168.0.3\lapguest
  Type the password for \\192.168.0.3\pcc:
  The context of the user provided is not valid.

  More help is available by typing NET HELPMSG 3775.

  I think its something stupid, I forgot, but he is elusive.     I also put the name of the computer in the 192.168.0.3 place, but it does not help.  There is no involved DNS.

  Using the graphical interface, I can browse the network to find the folder to add, but there is nothing under the computer name of the computer.  "pcname" is not a valid host name.   Otherwise download "logon unsuccessful".   I tested the connection on the PC and it is certainly true.

  In addition, I traced \\192.168.0.3\C$ successfully, but I got my LOCAL drive (portable) C.   ????  that should be a big clue, but call me clueless...

  I even uninstalled mcafee (completely) just in case.  did ' t like it anyway so no biggie.

  I know that there is a big DUH when this has been resolved.

  Thanks Aaron, but I think I did it to her.

  In the meantime, I decided to try sharing in the opposite direction.   Which made me respond finally that est.1 which est.2 whos.3.   A lot of listening to ipconfig.     What etait.3.2 is the last time.  (the est.2 PC and computer laptop est.3)  I still want to understand how these numbers are assigned.

  I found the option - rr in my earlier review, but do not know if he had an impact.   Also reluctantly, I created an account with the same name on both systems to try.   First of all, I shared with who.    Later, I could share by using the account name that exists on the PC (lapguest).

  I don't really know how the problem etait.2 et.3 mixup questions and/or syntax (file specification must be \\192.168.0.2\share-name) spec not \\PCNAME\share-name and the user must be PCNAME\username) and/or services and windows XP/VISTA problems.  Maybe my new sequence got something instantiated later.   Hope it sticks, whatever it is.   I wrote my orders exactly.  I hope that when I reboot or whether, I not have this problem again.

  Ah-ah... before you sign this note, I went to test the laptop via the network printer I had previously put in place of a printed page.  It did not work.  I can't see why.  the specifications of the printer is Photosmart \\192.168.0.3\HP... which was fine before, but now it faudrait.2.  I'll have to add another printer network for the new address.  I hope I remember how to do this.

  Now, I can clearly see the benefits of DNS.  Is there a simple way to create a name "servername" instead of having to depend on 192.168.0.n?

• network drive mapped 2003 server need stay connected after journal so that when my script is scheduled to run the player will always be mapped.

  2003 network drive server need mapped stay connected after journal so that when my script is scheduled to run the player will always map. ??

  Hello Scott,

  This is not the right forum for issues with Windows Server 2003.
  Please click the link below to ask your question in the appropriate forum TechNet.
  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Thank you

  Marilyn

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• Error on the network drive mapping

  Hello

  From an XP machine, to another XP machine which is used as a server temporary database (with just the back end of a split MS Access database) I get the following error trying to map a network drive:

  Error loading Setup50045.fOn

  A dll initialization routine failed.

  There are about 9 other users that connect successfully to this shared drive, and this particular user, logged in as long as another user in the same machine, map this drive without any errors.

  Please if anyone can help.

  Thank you in advance!

  Hi PsyberFox,

  Method 1

  I suggest that you perform the restoration of the system to the point while it was working fine.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2

  If the previous step fails, see if the problem persists on a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Method 3

  If the previous step fails, then you need to repair the Windows XP installation and check if it helps.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• EliteBook 8760w: 8760w with HDTV as second moniter Elitebook, download windows entartrés when switching from the laptop to the TV.

  Graphics card: AMD over-pants M5950

  TV: Insignia NS-32L240A13

  I recently bought a DisplayPort to HDMI Cable to connect my laptop (with the DisplayPort) on my HDTV (with HDMI port). When I have them hooked up and extended my screen on tv, everything went well in the beginning. The operating system showed my office on tv exactly as I expected. However, when I moved one of my windows above (Google Chrome to be precise) from my laptop to the TV, the size of the window to expand. Immediately, I thought it was a problem of resolution so I opened the AMD Catalyst Control Center to check the settings on my TV. He said that the format is standard 1080 p 60 (1920x1080@60Hz), exactly what I thought it should be. Then I noticed that when I go to detect screens and click on identify, the 2 big which is supposed to appear right in the middle of the screen appeared in the lower right of the screen. On this basis, I determined that the problem must be that my graphics card think my tv screen is bigger than it actually is. The first thing I did after has been updated of my Chipset drivers and graphics, but which has no effect. After the search of all the nooks and crannies of the Catalyst Control Center and try to find someone else on the internet with this specific problem, I couldn't find any way to get my windows to the right size and get 2 (from by clicking the button all identify) to appear in the center of the screen where it is supposed to be.

  Some additional notes:

  • In the screen resolution of Microsoft menu in the Control Panel, clicking on identify with my puts selected tv 2 in the Center where it should be, is only to Catalyst Control Center who gets hurt.
  • I tried using a different TV, but he had the same problem.
  • When I connect my laptop to my tv via a VGA cable, everything seems fine and has the correct size. (My VGA cable is only a few feet, so I have to buy a longer in order to to use;) I try to avoid this. And honestly, an HDMI DisplayPort connection / should work better than a VGA connection, anyway.)

  If you have any ideas on how to fix this or if you would like more information, please let me know.

  Thank you for your time.

  Update:

  I tried to get help from my friend with this and at one point during our investigation, we hung his laptop to the TV using a mini-hdmi to hdmi cable. We found that he had the same problem of sizing as me which begs the question, is simply how the hdmi connections are supposed to work? If so, it is very annoying and I expect there to be a setting somewhere to turn it off, but I can't seem to find it.

  Well, I thought that the problem, and honestly I'm pretty embarrassed that I didn't understand it sooner. In the resolution of the screen control panel screen there is a link written as 'Make text and other items more or less '. That takes you to a page that has a setting for the size of all the items on the desktop with 3 smaller averages, options and more. Normally, I have this game to kids, but for some reason my DisplayPort output was the default setting of the support. I changed it to smaller and now everything looks the way I expect to. Hooray!

• Message error "GFXUI has stopped working" when starting from the laptop to the top, running Windows 7

  Hi guys,.

  When I start my laptop there is a popup saying "GFXUI stopped working.

  Please tell me what to do...

  Thank you

  Ajay

  The seams of this file to be part of the Intel graphics drivers [1]. Install the latest Intel graphics drivers to fix.

  André

  [1] http://answers.yahoo.com/question/index?qid=20100208064051AArbWBM

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Password required when trying to map a network drive or access the files from another computer

  I'm trying to set up a home network with a computer that is used as a file server.  I have computers successfully connected in a unique working group and that you can see all of the computers in my 'network', but whenever I try to access another computer or map a drive, I wonder a user name and password.  How can I remove this requirement or solve this problem?

  Hi Kalomar,

  If your computer is on a workgroup, you have the ability to turn password protection on or off. Disable password protected sharing on the computer that is connected and check if you are always prompted for a password.

  1. open the network and sharing Center by clicking theStart button, clicking Control Panel, click network and Internet, click network and sharing Center.

  ·        Click the arrow next topassword protected sharing, and then click turn off password protected sharing

  2. click onapply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Note: If you change the password on one computer, you will need to change it on the other computer as well, otherwise you will again be asked a password.

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• directory on a map network drive map

  Hi all
  I have a shared folder on my machine and he mapped as a drive (drive z) network adapter in the server and created a directory for that directory like this map
  
  Create directory served as "z:\. » ;
  
  Grant read, write on directory sitting to the public;
  
  and I started to export using pointing to the directory datapump was sitting and I got this following error message
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  ORA-39002: invalid operation
  ORA-39070: unable to open the log file.
  ORA-29283: invalid file operation
  ORA-06512: at "SYS." UTL_FILE", line 488
  ORA-29283: invalid file operation
  
  I also tried to create a directory in various method like below
  
  create headquartered directory as ' / / sat1/sharing /';
  
  Create directory served as "\\sat1\d$\share";
  
  Create directory sata as '\\sat1\share\ ';
  
  
  but for all the scenarios that I got the same error, no support to this question is very significant.
  
  
  Thank you
  Satish.J

  Looks like you are running this on a windows server.

  Oracle service runs under the local system account by default, and this local system account cannot see what you have mapped as mappings are unique to each user account. You can check the Start Run Services.msc--> OracleServiceXXXX-->-->---> properties--> logon

  The quick fix would be to run the Oracle service under the user account used to create the map, but this creates some additional problems for example passwords expire or the account is locked.

• My PowerConnect 6248 switch loses its settings when disconnected from the power

  Hello

  I'll put up a PowerConnect 6248 switch on my local network through Web interface (I can't use serial to do).

  I put the IP, login, password, a LAG, SNTP server address, etc.

  It works fine until I unplugged the power cord to the switch to simulate a power outage. When I plugged in the power cord, the switch will reboot by displaying its default settings and I release all of mine.

  Y at - it a specific command, I missed to save all my settings in the switch?

  Thank you for your help.

  Pascal.

  The switch has two separate configuration locations, a running configuration and startup configuration. This allows you to change configuration and test running before engaging them in the startup configuration. Once you have the running configuration, how you want it, you need to run the # copy running-config startup-config command, or just copy # run start.

  See you soon