Why my partially black screen when using win7?
Hello everyone. I'm having this problem with my screen. When I start using my computer, the screen is very clear, but in a short time later, it darkens partially. I can still see what is happening, but the darkness makes it harder to see things. Can someone tell me why this is happening and how to fix. Thank you for any offer of assistance.
You can try to disable hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
You will need to close and restart Firefox after enabling/disabling this setting.
You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.
led screen have a HP Pavilion 22xi. It is a year and no warranty left. He started to go to a black screen when you use it. I have to unplug the monitor for the display. the power light lights up but won't stop him. I saw a few ppl having the same problem, without success to get this resolved. I tried external monitor on another laptop and have the same problem. I replaced the AC adapt power and also downloaded the drivers for the monitor. It's very frustrating. I tried to reset to factory setting, and nothing changes. It works for a while, then all of a sudden go to black screen and I have to unplug it from the back. Please help...
I understand that your LED HP Pavilion 22xi screen just shuts off and will not turn off. After reading your post, it seems that the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I want to thank you for display on the HP Forums. Have a great day!
I've got Premiere Pro CS6 and I started testing the use of x 264 with Dxtory. The problem I encounter is that the film is incompatible with any suite preset (AFAIK) apart from the AVC-Intra 100 (AVC-Intra 100 1080 p 30 fps is the one I am using). However when I use this preset all Preview gives me a black screen so that the audio is played perfectly. It is not urgent, because it is always possible to simply convert the movie to MP4 with Handbrake, however not being is not able to use this codec would be a shame, especially since I've seen others use it without any problem at all.
Okay, I tweaked around and I'm happy to say that I have to work. It's really simple, all you have to do is go into the settings of codec on Dxtory for x264vfw and set the FourCC to x 264 and the GOP (Min and Max) to 1. It is not an obvious solution, so I hope that the one who has problems with this managed to find this thread
I would like to know what I can do to address these problems:
I only had my Clip 4 GB zip drive for a month, and today I noticed after that him have plugged for charging for more than a day lower the right hand screen is black. The rest of the screen is fine, it's just this little corner of the screen that is like that! Partially black screen is triangular and always there.
Another problem I've noticed is that I had it charging for more than a day, I expect to be fully recharged at the time where I unplugged, yet when I watched the news system, he indicated that power was '88% '. And then, when I was checked to make sure it read "77%", then again in '88% ' after I checked it once more. WTH is happening? Why the change?
Oh, and I think that the firmware is up to date (not sure if this is relevant) because they say "Version: V01.01.20F" in the settings.
In addition, there is a third question, I believe. I tried to reset by pressing the button of power for 20-30 seconds, but for some reason any, my drive is as insensitive to this, he starts just straight up / stops due to the initial pressure - i.e. function Reset does not work.
Others that the three above, I have not noticed other unusual symptoms. I would be extremely grateful if anyone could give me any advice to solve this problem.
Edit - I just noticed that when the drive is connected, he said 100% fully charged, but as soon as I unplug the 88% said
I would not be concerned about battery level indicator, as the Zip Clip is infamous for having been innacurate that. Apparently better, if you want to know the exact charge: go to system info. screen (under system settings) and check the percentage of battery charge it.
Troubesome more is the screen problem. If I were you, I would try to manually reapply the latest firmware (see firmware upgrade thread sticky at the top of the forum). If that doesn't resolve the issues, I would contact the seller and/or the SanDisk for a defective/warranty drive replacement.
import FLV files results in a black screen when he's on stage. Why is this happening? I have a swf file, then using swf video converter convert. I then import the video and when it is put on the stage she translates into a black screen that had no pictures. This happens even when I play the swf file.
The converted file works fine when I open it with a Media Player for this indicates clearly that the flash is having a problem.
The SWF-> Video converter is very certainly at fault for your problems. That's why I think you should either use ActionScript to import the SWF file to play or import once in a new document and export it as a video directly from flash. I used FLV for a long time and I've seen a lot of questions. This is no easy task to convert a SWF to a video. I think it makes more sense to let Adobe do the work, it was designed to do.
Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?
I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
What do you think about this?
Your ad is a little strange to me.
How you can surf internet if the screen is black? I mean, it's not logical for me.
What Toshiba laptop model do you have?
original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.
When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you
Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then
Original title: can't open WindowsI can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(What should I do? Thank you!!!
1 have. what changes you made before the question?
2. What are the options you see in the advanced startup options?
You can follow the methods in the article in order to solve the problem.
Computer stops responding with a black screen when you start Windows XP
Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.
Follow these steps to try to solve your problems of boot.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
Scan with Malwarebytes in SafeMode with networking to ensure:
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight...
How to use Malwarebytes once it is installed and updated:
1. open Malwarebytes > click the update tab at the top > get the latest updates.
2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer
3 MBAM will now start to scan your computer for malware. This process can take some time.
4. when the scan is complete, a message box will appear
5. you must click on the OK button to close the message box and continue the process of Malwareremoval.
6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .
7. a screen showing all of the malware displayed the program that is
8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.
9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.
10. you can now exit the MBAM program.
It's Vista Security Forum.
If the above does not she, repost in the Vista repair and recovery Forum:
See you soon.
Mick Murphy - Microsoft partner
can someone give me advice on the question? (I have found no similar post, so please forgive me if duplicate messages...)
-Alpha OS Dev device: 10.0.4.197
-SDK Webworks 126.96.36.199
I always get a black screen when I deploy & launch applications for the test (I use a debugging token)... I'm afraid that I may have problems of compatibility between the version of the OS and SDK Webworks... I'm about to upgrade the unit right now, but if anyone else has experienced the same problems, please let me know! Any help is very appreciated!
Moreover, the two training simulators & VMWare work very well...
Thank you very much
Could you let me know if the update of device solves your problem? If this isn't the case, you are able to provide example code, and I can test on my end?
I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
Original title: Fable III problem
Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.
The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?
You can view the following link to learn more about this:
Fable III for PC: video and required system configuration problems
I hope that helps!
If you need help on this problem or any question of windows in the future let us know.
THE LAP TOP SHOWS A BLACK SCREEN WHEN OPENING THE LID.
THE SCREEN WORKS WELL WHEN PUT ON, BUT ON CLOSING THE LID FOR A WHILE AND RE OPENING STARTING THE ENGINE AND THE LIGHTS FLASH BUT THE SCREEN IS BLACK.
TO RETRIEVE THE SCREEN POWER BUTTON MUST BE PUSHED AND WHEN FLASHING JUST AGAIN PUSHED THE SCREEN THEN WAKES UP.
THIS FIRST STARTED WINDOWS 10 CHARGE BUT WHE I GO BACK TO THE FACTORY SETTINGS AND WHICH IS 8.1
I TRIED TO REMOVE THE BATTERY TO RESET AND REMOVE AND REPLACE MEMORY CARDS AS SUGGESTED BY SOME SITES I RELOADED ALSO BIOS AND I STILL HAVE THE PROBLEM.
I WOULD BE VERY GREATFUL FOR ANY HELP.
Thank you for your update.
I am pleased that now when you close the lid, it does nothing.
You don't have the possibility to contact the HP support for assistance. They can access your system remotely to help overcome the difficulties.
Contact HP to Contact HP Support assistance
got black screen when changing the screen background images
can any one help
OfficeJet pro 8600 print a single vertical black line when using the charger
I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.
If you need help, let me know.
Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__
If you think that Windows updates are loaded:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
Text is broken when scanning to the TOP of the page; but good scan to the bottom of the page. The text looks like a shotgun was fired through it. It has been good both ways until the last update. This isn't a problem in other programs, including Inte
I found some comments dating back to March of people facing the A30 laptop random extinction. I am eperiencing the same thing. Thinking that it might be a virus I downloaded Norton AntiVirus which caused my laptop to blue screen. I had fixed by a pro
I recently bought this new model which I must say has a host of extras as standard and I am happy to a certain extent. However, I had to upgrade my HDD immediately because I need more space and thus installed win xp pro (not the original with win xp
Since the upgrade to 3.6.13, I can more open tabs using the extension, by right-clicking on the page and then not always. I had to go to Chrome that I can't get firefox to work.
Firefox worked fine. I used it for years. When I finished the recent update 3.6.13, the new tab button/extension bit + box work quitting smoking. I can click on and nothing happens. I right click, get the drop down menu but nothing works. I can't ope
Nice day After extensive research I have not found an answer so I turn to the community. I'm trying to help a friend facility a VPN but it's a scenario that I have not dealt and hope that someone has. Here's the basic scheme; Site 1 - 172.16.23.0/24