Why my program runs fine in execution of climax, but not normally?

Hey everybody,

So I created a program that works very well (to produce a graph of intensity) when I select run, but then when I run the program without execution of climax, the output intensity graph does not appear. I enclose a copy of my program for reference. Thanks in advance for the help!

What kind of error do you see? What does not work?

I have all the subVIs that make up your VI you have posted and it would be difficult to say what is happening, but I suspect that you run in some sort of timing issue. When you run with execution highlighting turned on you slowly run downhill. During normal execution things can run before the system is ready. Maybe your initialization of the camera takes time to complete (on the hardware itself) and when you run in normal mode you are trying to access it until it's ready.

Tags: NI Software

Similar Questions

  • Program runs in the hidden administrator account, but not the administrator account

    I have been using Altium Designer for about 5 months. One day, I tried Eun and got the error "dxp.exe has stopped working.  So, after trying a re-boot.  I have reinstalled the software.  At the end of installation, I get the message "the system administrator has set policies that prevent this facility." The installation then said that the installation has been completed successfully. I tried: unlock all files in the installation directory, run the installation as an administrator, the installation running on the hidden administrator account. Turn off UAC.

    The installation leaves me with a program which runs in hidden administrator but not nromal administrator.  Even if the install ation was made as normal anministrator.

    I am running Windows 7 Home premium, so the control of local security is not available.

    Thank you for your help ITKnowledge24.  Your post helped me to find parts of the program that I would never know that existed.

    It turns out that my problem was in two parts.  First what killed the software is primarily a print unrelated dirver.  (go figure)  Installation errors were caused because I downloaded the version recient most of the manufacturer's Web site.  When I reinstalled using the old version, the installation was without error.  The software starts to run correctly when the printer driver has been removed.  It seems that windows security was only a Kipper.

  • Windows Installer error - "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected.

    When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

    ---------------------

    Troubleshoot Windows install

    2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    Substitute:

    Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

    1. in the menu 'Start', click on ' execute:.»

    2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

    3. in the menu 'Start', click 'run '.

    4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

    Click Start Orb, in the box, type search: Regedit.

    Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

    Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  • Why build application vi works in the development environment, but not in the executable file; error 1025

    Hello

    I have a request ('A') that I am trying to build another application ("BuildA").

    I can create a request for A manually of its project using the Build specification, and it works fine (A.exe).

    Also, when I run BuildA.vi in the development environment he calls the "Build.vi" properly and again generates application A.exe very well.

    Then, when I ask BuildA (manually) and run BuildA.exe, I would expect that it also creates A.exe as BuildA.vi did in the development environment.

    However, it fails with the error:

    Code: 1025

    Reference VI opened in .vi NI_App_Builder_API.lvlib:Build (path)-> BuildA.vi
    Path of the VI: C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi

    I noticed this thread , which looks like a similar problem, but has reached no conclusion.

    Why BuildA.vi works fine in the LabVIEW environment, but the application that builda.exe does not work?  All paths are hard-coded, so it shouldn't be a path problem.

    Thank you

    -john

    eye_in_the_sky wrote:

    I guess we will have to keep the application building separated the disappointment... automated scripts

    There are still other options.  Lets say configure you VI to run then.  If you ran the following command from your script line

    "C:\Program NIUninstaller Instruments\LabVIEW 2011\LabVIEW.exe" "C:\BuildA.vi".

    It would then open your BuildA.vi in LabVIEW and run in the development environment.

  • AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

    Using Windows7 - I tried Windows10 but restored to 7.

    AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

    Help please...

    OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

  • The scaner of safety program run for almost two hours and did not have detected what regardless of whether what is this microsoft scan?

    Operating system: Microsofti¿½ Windows Vista? Home (it shows that I have this Setup on my computer)

    My computer is corrupt the scaner microsoft run for almost two hours and did not find anyting.

    I have siscis Trojan, Skype worm PEKSE aver 1300 errors discovered by the other's signed starup program...

    Port 80 and 123 corrupt... I'm on hollow connection DSL my modem wireless (and connected to some infrastructure 5 GHz) and 2.4 Ghz wireless where I search I'm somehow hacked via the wireless I guess...

    Any program which tells you that you have 1300 errors is almost certainly a scam.

    Try to scan with Malwarebytes free

    http://www.Malwarebytes.org/products/malwarebytes_free

  • I can't understand why the latter splits the live preview... but not in the browser?

    I finally got my site to the top and everything runs great... except that I can't understand why this page behaves as if it was too broad.

    http://www.johnnez.com/mainbooks.html

    He is defeated in the live preview... but not in the browser preview.

    Thanks for the tips...

    Jn

    Well, I was looking at your code for a longer period that is now in good health and the only thing I can think is to ask if you want to have two container div with a class of content?

    I don't know if it's the anser but you can try to delete one of these and then find an of the

    Tags to balance that up.

    Try just to comment on the following:

    Then put in the comment end tag and see if that helps.

    Just a thought

    Martin

  • TableView context Menu appears when running Java 8 until Update 5 but not later

    The code below works as its name suggests the update of Java 8 5 but not later:

    SerializableAttribute public class TableViewShowingOnlyAnAppendContextMenuItemIfRowIsEmptyElseDeleteIsIncluded extends Application {}

    final table private TableView < name > = new TableView <>();

    private data of ObservableList < name > finals = FXCollections.observableArrayList (new Name("Jacob"),

    New Name("Isabella"), New Name ("Ethan"), Name ("Emma") New Name ("Michael")) new;

    Public Shared Sub main (String [] args) {}

    Launch (args);

    }

    @Override

    {} public void start (steps)

    TableColumn < String > name, column = new TableColumn <>("name");

    column.setCellValueFactory (new PropertyValueFactory <>("name"));

    table.getColumns () .add (column);

    table.setItems (data);

    ContextMenu contextMenu = new ContextMenu();

    contextMenu.getItems () .add (MenuItem ("append")) new;

    table.setContextMenu (contextMenu);

    table.setRowFactory (tableView-> {}

    TableRow < name > line = new <>(TableRow);

    row.contextMenuProperty () .bind ((in English only)

    Bindings.When (Bindings.isNotNull (Row.itemProperty ()))

    . Then (showOnlyAppendContextMenuItemIfRowIsEmptyElseIncludeDelete ())

    .otherwise ((ContextMenu) null));

    next row;

    });

    Scene = new Scene (table);

    stage.setScene (scene);

    internship. Show();

    }

    private ContextMenu showOnlyAppendContextMenuItemIfRowIsEmptyElseIncludeDelete() {}

    RowMenu ContextMenu = new ContextMenu();

    ContextMenu tableMenu = table.getContextMenu ();

    If (tableMenu! = null)

    rowMenu.getItems () .addAll (tableMenu.getItems ());

    rowMenu.getItems () .add (MenuItem ("delete")) new;

    Return rowMenu;

    }

    Public NotInheritable class {name}

    private final SimpleStringProperty name

    private (String name) {}

    myIdName = new SimpleStringProperty (name);

    }

    public String getName() {}

    Return name.get ();

    }

    public void setName (String name) {}

    This.Name.Set (Name);

    }

    }

    }

    Can help me find the error in the code? Or if there is anything, it's a regression which must be submitted? From now on, all computers used have 8u5.

    Thanks in advance.

    Answered correctly by James_D:

    http://StackOverflow.com/questions/28195552/JavaFX-TableView-context-menu-item-shows-up-when-run-on-Java-8-until-Update-5-Bu

    pasted below:

    The solution is to create new menu items which are copies of those in the context menu of the table:

    private ContextMenu showOnlyAppendContextMenuItemIfRowIsEmptyElseIncludeDelete() {}
        RowMenu ContextMenu = new ContextMenu();
        ContextMenu tableMenu = table.getContextMenu ();
        If (tableMenu! = null) {}
            {for (MenuItem item: {tableMenu.getItems ())}
                RowItem MenuItem = new MenuItem (item.getText ());
                rowItem.setGraphic (item.getGraphic ());
                rowItem.setOnAction (item.getOnAction ());
                rowMenu.getItems () .add (rowItem);
            }
        }
        rowMenu.getItems () .add (MenuItem ("delete")) new;
        Return rowMenu;

    }

  • Why does my audio play in the source monitor, but not in the timeline?

    I imported some MOV files in first 2015 (codec H.264, PCM Linear, timecode).  The audio plays fine in the source window, but when I drag the clip to the timeline, no audio file appears under it and there is no sound.  I followed the instructions on this link, nothing helps: no sound during playback in Adobe Premiere Pro.

    These clips were filmed on a GH4.  I was shooting 1080 24 fps.  Before this problem I was shooting on a Canon 5 d.  Is it possible that it is the codec?

    Video playback in the timeline panel is also trolling and jittering a bit, but normally play in the source monitor.

    If anyone can help, please excessively it because I am not very fluent in the first.  Thank you.

    Source patch http://forums.adobe.com/thread/1442800?tstart=0 can help

  • programs run fine unless it is connected to the internet, then the mouse is intermittent and you can say that the program is currently impeded.

    Windows 7, everything fine until yesterday. No new or modified programs.

    Thank you, Chris, I did a restore yesterday until the problem came and everything was normal until I restarted this morning - back to the same old mess. First try virus scan. Note that when I stopped last night that an automatic update was underway; think I will cut auto all and then see what happens (after I do a virus of course scan. Thanks again.

  • Programs running in Compatibility Mode (Windows 98) does not work (or more)

    For years, I have been (re-) installation file SETUP.exe (Epson status monitor of 1998) in Compatible Mode on a regular basis.  I right click on the file SETUP.exe, then I push properties-> compatibility-> Mode Compatible and complete under Windows 98/Windows Me.  Sometimes I run the file SETUP.exe in Windows 2000 mode also, never a problem.

    However, recently, I used DLLArchive and now the sweet Epson no longer works.  Resettlement does not either, as it must be installed in Compatible Mode and that no longer works.  In addition, run the file SETUP.exe in any Mode Compatible (Win95, 98, Me, NT, 2000) no longer works, even in non-compliant.

    I still get the same error:

    "To install EPSON Status Monitor 2, you have Windows95, NT3.1 or NT 4.0"

    While SETUP.exe is clearly compatible Win95/98.

    Earlier today, I couldn't use the Compatibility Assistant programs, whenever I had a "marscore.dll is missing" error when opening start-> Help and Support.  This problem is now solved: help and Support, and then the program compatibility Wizard work fine (I think).

    Any suggestions how to solve the compatibility problem?

    How can I check what DLL files are needed?

    Thanks in advance, Johan

    http://www.pcreview.co.uk/forums/unable-install-Epson-status-monitor-t2043535.html

    http://files.support.Epson.com/htmldocs/pro9k_/pro9k_rf/ref_G/statw_1.htm

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=14422&infoType=downloads

  • Read a signal scope works in execution to highlight, but not in real time

    I want to get the maximum value of a waveform to a former stretch of Agilent 54622 via GPIB.

    The problem is that I regularly receive a Visa Read error-1073807339 ("timeout expired before the operation is completed") when running in real time, but NEVER in execution to highlight mode.

    The posts here suggests that the calendar can cause the read to run before writing was able to finish. So, I used one - manually controlled while loop, sequence and blocks waiting for try and ultra Structure separated blocks of reading and writing of overlap between them. But it still does not work!

    Suggestions, please? (Thanks!)

    If you happen to open the VI I attached, you will see that I use a serial port. This is because I use a USB of Prologix-GPIB adapter to interface with the scope (I don't have an adapter USB of NOR-GPIB). I used successfully this Prologix adapter for over 2 years to connect perfectly with an amplifier to locking SR830 and several other devices, so I don't think that's the problem...

    What you need is the magic behind fairy!

  • Why Firefox will allow me to have several tabs, but not allow me to switch between tabs and can only watch a new tab when closing the previous?

    Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • In Firefox 29,0 and above, click on the menu button

      click Help

      then select restart with disabled modules.

    • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

    If Firefox is not running, you can start Firefox in Mode safe mode as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • Carpet * a DVD UJ850s on Satellite L30 works fine to read the CD but not DVD

    Hello.. This seems to be a different problem with the other DVD problems on the forum.

    I have a brand new PSL33E L30 - 10V running Vista Edition family Basic. It has all the critical updates installed.
    He pre-recorded bed and house burned audio and data CD and burn the CD readable on other machines.
    Device Manager reports DVD works well and the driver is up-to-date.

    However, it will not read blank pre-recorded (correct region) or home burned DVD or DVD format with the
    applications provided or with any other applications, I installed after trying.
    There is no reading error messages - it just hangs and the activity of the DVD light is solid in
    a player and do nothing if you use explore to watch.
    When you try to format - you get "windows is unable to complete this operation."

    Someone at - it ideas if this is likely to be hardware, driver or a vista registry problem and
    How to solve it. Bought online and don't want to send it if there is a software fix.

    Thank you

    Can you start with DVD recovery delivered? Please test and let know us what exactly is going on.

  • Attempt to connect wi fi on my Dell computer, running windows XP? Have DSL but not Ethernet. Faced with problems. Checked with CISCO router but not help there. CANY anyone help

    I have a problem connecting to a Cisco E100 router to my computer. My count (office) does not have a wireless. I have DSL from. Cisco tells me to plug a router using Ethernet cable to connect. I don't have an Ethernet connection on my computer. At present I have USB connect the computer to the Westell modem.  Can anyone help? I hope this is enough information. Basically what I'm hoping to do is to install the WiFi so I can use a tablet now and maybe a laptop this last on.

    Thank you

    On the routers only house you can use USB connections are those provided by some ISPs.  An Ethernet connection between the router and the computer is far more preferred.

    Your router a Cisco E1000 or is it really E100 (I thought that Cisco makes a model with this designation not)?

    It is quite surprising that you don't have an Ethernet connection that is built into your computer.  What is the complete model number (or, preferably, the Number of Service Dell)?

    Open the Device Manager (start > run > devmgmt.msc > OK).  Expand the "Network card" category by clicking on the + next to him.  What devices are listed in this category.

    If you don't really have an Ethernet or an adapter wireless built into your computer, you can add one, using a PCI internal (if you have a desktop/Tower computer) or external (PC card for laptops) or USB to laptops or desktop/towers.

    Also, the normal configuration is to connect your DSL modem to the router and then the router to the computer.  If your Westell modem has an Ethernet connection, you must use your new router in a non-standard configuration.  Even if the Westell modem has an Ethernet port, you may need to do some reconfiguration for her as well.  What is the complete model of the Westell modem number?

Maybe you are looking for

  • How can I stop firefox 29,0 start with the page tutorial every time I open it?

    I get 2 tabs opening are the tutorial page and the other is my home page. Very annoying and me are gone through any step hoping this would complement something and had no chance to solve this issue.

  • When I uncheck the option MenuToolbar, my Firefox button does not appear

    Whenever I have untick the box next to the menu bar that the firefox button refuses to fill. It is only on the computer of my wife, she's running windows 7 Home premium and I did a new install of Mozilla Firefox and the button is not there for some r

  • error code 80072efd, not able to install updates for Microsoft put updated or Anti virus

    I tried to update my laptop with Windows Vista Ultimate Edition with the latest updates of security etc from Windows.  I can't update.  When I try to go to the site it blocks just the pop up with a page download page as mif I am no longer connected t

  • M5100 RAM upgrade

    I have an Acer Aspire M5100 who had DDR2 PC2 5300U installed at 667 mhz. My motherboard number is: RS690M03-8EKRHFS2H. I want to know what my maximum memory. I found conflicting information on this. I now have 4 GB of RAM, because I upgraded to 4 x 1

  • I get the 80040154 error when I try to connect.

    It started when I updated to the latest version of Windows Live.I tried the steps to correct posted the link in the error message and offered in this forum for error (80040154) but nothing helps.   The steps to correct this were the same in both case