Why my PSAG0A - 02100Q Satellite A300 does not install audio drivers?

I unsuccessfully downloaded (several times) the audio drivers from Toshiba downloads to fix a no audio device installed on a laptop Satellite A300 of operation Vista x 32. Previously it was solid. Also had computer built to solve the problem, but it did not work. Can someone help please.


I think you tried a bad driver.
Some of the A300 series supports a Conexant audio chip and some of these units are equipped with a Realtek audio chip to use the right driver for a sound card.

Satellite A300 PSAG0A - 02100Q supports a chip (onboard) Realtek ALC268 sound and you have the Realtek HD audio driver.
This can be downloaded here:

Tags: Toshiba

Similar Questions

  • Satellite A300 does not Logitech Bluetooth receiver.


    My problem is that I don't know exactly what the problem...
    I have a laptop of 1MS Satellite A300 does not have built-in Bluetooth

    I have a bluetooth (MX5000 series) Logitech mouse that I installed for Windows Vista (I downloaded the latest driver of Logitech's official website)
    The Logitech software for bluetotth is called set point and the Assembly says I can connect other bluetooth devices through the bluetooth mouse receiver (like a cell phone, for example).

    The mouse works perfectly well, the problem starts when I try to connect my cell phone to the laptop (with the Nokia PC Suite software). I get a message that says that there is no bluetooth hardware installed. I tried to look in the bluetooth configuration control panel, but it isn't here. I can't find a folder or a tool that allows me to set up bluetooth.

    I would like to know what is the problem, why my laptop does not recognize the bluetooth receiver.
    I used to have installed on another laptop with Windows XP and it used to work without any problems.

    I tried the receiver in all the USB ports on the laptop with no result.

    Hi guys

    I can say with certainty that the Satellite A300-1 ms was not was equipped with the internal BT module and so the laptop does not recognize the Bluetooth receiver
    If you want to connect to the laptop to the external BT device then you need a BT USB key for example.

    Welcome them

  • Satellite 2420 - does not install Ethernet

    Installed Windows XP SP2, but the drive does not install ethernet.


    Can't find my wireless network


    That means you are trying to install a WLAN PCMICA card or have I misunderstood something?

    Well, I doubt it is a Toshiba related issue and you should contact this PCMCIA card making.

    What you can do is to check the Device Manager if there are yellow exclamations points. Usually, the PCMCIA card must be properly and then you will find WLAN networks in range.

  • Satellite A300 - does not connect to the secure network to WPA

    Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

    I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

    Would be grateful for your help.

    Thank you.

    On the Toshiba site is a newer version of the driver available (
    Then I would try the new driver.

    Consult the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Satellite A300 does not start

    Hello forum members

    I had a lot of problems with my Toshiba Satellite A300 for quite awhile. I had found the solution to one of the problems through this forum, but now the problem I am facing. I can t find the solution to the problem.

    When I press the power on button, the laptop just blinks (fan runs then shuts down, as he gets power pulse. sign satellite on the left side of the laptop flashes and the laptop stops, then the laptop itself tries to start, but this goes on and for a long time.) It finally boots (not really specific time when it starts up, sometimes after an hour, 2 hours or all day) and I can use. I tried to put the laptop in hibernate mood/sleep but no use, whenever I press the power on button, I face the same problem. Once it starts, it doesn t stop and works very well.

    I can't really understand what is the problem? Your answers are really appreciated. I really have a hard time with this laptop.


    Post edited by: Akorai

    Nice to hear that everything is OK now.

  • Satellite A300 does not start after the installation of the anti-virus


    I brought a Satellite A300 today and loaded it up and it was fine.
    I uninstalled the google toolbar, office and land it came preinstalled with also the mcafree anti virus.
    So I could install my own anti virus.

    After that the system asked me to restart my pc I did.
    Since then, the system cross the 'Please wait' screen
    But it won't let me boot into safe mode. I tried a system restore.

    Any ideas?


    To me, it seems that you 3rd party antivirus software caused this strange and confusing problem the Vista OS installed.

    In my eyes a simply, new installation of operating system using the Toshiba Recovery disk would solve this problem.

    If you are able to start the operating system in safe mode and then try to remove your installed Antivirus software, then clean the registry and operating system using the free tool called CCLeaner and try to start the laptop again.

    Maybe it helps you too

  • Satellite A300 does not work

    My laptop broke down. When I turn on the laptop I get a screen black ask me to select either Startup Repair (does not work) or start Windows normally (does not work).

    I am then presented with the System Recovery Options (Startup Repair, System Restore, restore pc windows completely, command prompt, windows memory diagnostic tool, toshiba Recovery Wizard). No matter which option to choose, nothing works. I tried the Recovery Wizard, but he advises that I will lose all data.

    I can't afford to lose all my data because it will mean I lose as itunes and I won't be able to deauthorise computer.

    I also have a lot of photos and other important information.

    I have no backup discs (they were not provided when I bought the laptop).

    Hoping someone can help as I really need retriend my all.


    > I have no backup discs (they were not provided when I bought the laptop).
    The recovery disc are not provided, because you create the recovery disks using the preinstalled software called creator of Toshiba drive back (I guess this is mentioned in the user manual)

    But it is the same procedure of recovery provided by Toshiba Wizard of recovery you can find, press F8.
    Both procedures (HARD disk or recovery disk recovery) would format the HARD drive.

    I think you should start Notepad using the Live CD. You can use Linux Live CD WinPE or (BartPE).
    Google for it

    These CD would boot a Windows or Linux environment and will have access to the files on the HARD drive.
    Then you could safe files on external media and then you can install Windows using HARD drive recovery.

  • Satellite A300 - can not install operating system

    I just bought a laptop Satellite A300.
    At first she had no operating system, but the at a store installed Windows 7 ultimate (trial version).

    Now I have problems to install another system.
    It shows me an error and one more thing. When I bought the laptop he had no cd - s, no drivers, it's ok?

    Answer me, I don't know what to do.


    As far as I know Toshiba portable computers can be purchased with an operating system Windows.
    There is a Toshiba image that contains the Windows operating system (Vista, Win 7, etc.), drivers Toshiba, tools and utilities

    I put t know why you plug a laptop without OS to maybe was a bit cheaper to buy it without the Windows operating system

    What to say to the original Windows disc to install
    The Toshiba drivers are located on the page of the Toshiba driver

  • Why the DVD of Win7 installation does not install network controller?

    I described my adventure with a virus earlier. At one point, I went to Micro Center and bought a new drive for Win7 Home Premium install. The installation seems to be going OK, but when it's over, I wasn't able to get on the net because the driver for the network controller was not installed. I made 3 attwempts, but all have failed for the same reason. Why?  As far as I know, Microsoft does not ship any DVD W7 with the missing files, and I believe that the disk cannot be written and corrupted, so why these files not installed? Does anyone have a similar experience?

    Maybe it's a new network controller, which Windows 7 has not built in the class driver for. You can go to the website of the manufacturers on the computer you are using now and download the driver.

  • Satellite X 205 - cannot install audio drivers


    I have problems with installing the audio driver on my Satellite X 205 sli1. I tried to install the drivers from the realtek site, but they doesen't work. Then, I tried to install the patches 'kb835221' 'kb88811' and that the drivers but still nothing.

    I can't find the drivers on the toshiba Web site. In everest, I checked my audio device is - Realtek ALC268 @ Intel 82801HBM ICH8M - high definition Audio Controller PCI.

    Please help me!

    Hey Buddy,

    In my opinion the easiest way is installation of Service Pack 3 for Windows XP. It contains patches for cards high definition sound and the other important security fixes. You can download it from the Microsoft Web site.

    But SP3 or patches must be installed * first * and then the audio driver. Otherwise it will not work.

    So my recommendations, uninstalling the audio driver and clean your system using the freeware CCleaner tool. Restart your computer and make sure and install SP3 if it s does not. After that, install the latest driver from the Web to Realtek site.

    Check this box!

  • Satellite A300 does not start after extinction during the BIOS update


    I tried to update the BIOS after reading a TOSHIBA TEMPRO alert, after some time, apparently not run so I ran a second time, then both ask of BIOS appeared in the taskbar only and it froze while I did not start the upgrade or anything like that I had to the power off.

    I tried to restart, but now, it just on the screen stays black (the monitor is not powered, as if the system was not running), all LEDS are powered with flashing 'drive access', the led on the DVD Player keeps flashing making a noise every 3 seconds or more.

    I read on the forum that there may be no solution but to take it to an authorized service provider but I'm willing to take any possible solution before you do.

    Thanks for any advice.


    Hi, mate

    Unfortunately, you need to be reflash the Bios as something that went wrong during the update. You should contact the Asp and ask them to reflash. There is no other way to get your laptop to work.

    Good luck!

  • Satellite L300 - does not recognize audio or blank CDs

    My L300 recognizes and plays DVD but not recognize or play audio CDs or burn them to blank CDs. Any ideas?


    The forum contains a large number of discussions on the issues on the CD/DVD drive. You must use the forum search because everything has already been written and there you should find the solution to your problem.

    Just a little tip: try to delete upper and lower filters.

  • Why any program bit 32(X86) does not install the specific dirctory in the registry?


    I changed the dirctory programfile to 64 and 32 (X 8) 6-bit in the registry. However, threshold I see don't care programs 32 bits with the new dirctory and insist they settle inside C:\program (x 86)

    the (X 86)(32bit) programs I have tried are:

    Mozallia FireFox, Liberoffice and WinRar

    However, for 64 - bit is alritght and that they install in the specific dicrctory of r.

    This is the screenshot for registry

    I see you haven't changed all the entries - and there are more somewhere else that will have to be changed, IIRC.

    http://support.Microsoft.com/kb/933700 also applies

  • Desktop elite keyboard 1011 Microsoft Wireless model does not install the drivers please help

    well, I have a model of elite microsoft 1011 wireless keyboard and a wireless microsoft 1012 receiver model (it's a combo with a mouse, but is he missing)
    My problem is that I installed windows 7 x 86(32 bit) and I tried to plug right in my keyboard wireless via reciever.at first the 3 LEDS that have notified when keys locking are activated cycle first.
    After that he was known as 3 times it stopped.i unplugged the receiver thenreplugged in.this timw there no same cycle.
    I opened Device Manager to check the drivers.it been regestering unknown so I googled the names and found the microsoft drivers (don't know if it's maybe for a newer version on or not, he had the series in the installation) I installed them I clicked on one that says Microsoft elite wireless keyboard then install.after knowing it was installed I opened dev.manager and check to see if it helped it was always regestered as unknown so I restarted my computer and check again, but the same
    any help would be useful
    If I remember correctly he did for win98/xp
    Oh, this is for her tech data sheets
    Sorry if the question is already asked that I tried to be as straight as I could be
    If you have yahoo messenger installed on your computer send me a message if you have anything I can try this * address email is removed from the privacy *.

    The 7.10.344.0 driver version is the one offered to the keyboard itself.

    For office all the proposed version is ITPx86_1033_7.00.260.0.exe.

    You have a line of brief and clear view between the dongle and the keyboard? The signal may be weak or the dongle damaged the transfer to the new system.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

Maybe you are looking for