Why my sample rate does not match the output of timestamps in the waveform?

Similar Questions

• Getting the error «for input and output sample rate does not match...» »

  I am trying to create an audio file, but when I click on the record button I get this error:

  «The sampling rate of the audio output devices and audio don't match.» Audio cannot be recorded until this problem is corrected.

  Use the appropriate operating system or control panel of audio device to adjust the sampling frequency of the output devices and audio entries to use the same settings. »

  I have the preferences set to use operating system controls and it seems to work because when I change in the Win 7 Pro CP it adjusts at the hearing.

  So I do not know which need to be addressed. I use the video card as the source and not the speakers thus mean the output must be la carte too?

  Please help, I'm confused.

  Thanks for your time!

  Got an answer to a previous question asking how to record and thought, this could be useful for others.

  rothmannnyc,

  

  February 18, 2013 16:33 in response to talbot

  It takes a Windows setting and a setting of the hearing.

  You will need to go into your settings from Windows recording devices - if you see a speaker in the lower right of your screen, right-click on it and choose recording devices.  Find your audio input source, select Properties, go to advanced.  You should see a drop down menu with options for the quality and frequency of sampling, mono/stereo.  In general, you'll want to 44.1 kHz for audio; 48 Hz for the video.

  At the hearing, go to Edition/Preferences/Audio Hardware and select the same frequency of sampling for output.  I went through the same question a few months ago, and it worked for me.  Good luck!

• Error #3606: Sampler 0 format does not match the format of texture.

  Hello

  I try to use a cube texture but I got this error:

  Error #3606: Sampler 0 format does not match the format of texture.

  with this fragment of AGAL:

  ft0.w MOV, FC0 .x

  FT1.xyzw Tex, v0 .xzy, fs0
  Mul ft0.xyz, fc1.xyz, ft1.xyz
  MOV OC.xyzw, ft0.xyzw

  Apparently glsltoagal does not write the < parameters > fs0 is a problem or it has default values?

  Can I create textures to Cube in a specific way?

  I did a mistake using a faulty method, it was

  createCubeTexture

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• Signature App, number of Folios error does not match the main file Folio

  Hi all;

  I have a standalone application of 250 pages that I'm trying to compile for the Apple Store. I've read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my home directory of the user to discuss the issue. Here is an excerpt of the newspaper which has been created which, to me, shows why the app is not signed.

  46386 codesign ERROR [main]. Signatory - failure during the signature

  java.lang.RuntimeException: invalid package, number of folios does not match the primary file (Folio.xml or Issue.xml) 251-250 folio

  at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio (IPAOutputHelp er.java:272)

  at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio (IPAOutputHelper.java:1 92)

  at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)

  at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)

  at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)

  at com.adobe.devtech.codesign.Signer.main(Signer.java:46)

  46388 codesign ERROR [main]. Signatory - error: invalid package, number of folios does not match the master folio (Folio.xml or Issue.xml) 251-250

  I deleted special characters in the article titles and rebuilt the app only to deal with the same error. I have advanced and created a new AppID in the portal to Apple developers, created new files available, and the error remains. I am now to create a new folio and import the items into the new folio to see if that will solve the problem of "number of folios does not.

  Any help or idea would be amazing. Thanks to you all.

  -mat

  I created a new folio and all items imported again. After hitting "Create App" for this new folio, to about 10 pages in a 'PDF Export' error stopped the app creation process. I went in InDesign to update the layout for the 10 page to see that the PDF export issue kept me from updating the page layouts as well. Some thing in the InDesign file was not playing nice with the creation of folio, so I created two new InDesign files, deleted the article and built a new article from scratch. I was able to import the new page in a new article to the main folio and click on "Create App" again. This time he had no problems with the creative process. I have synced files available in App Builder and could sign the application code.

  I guess the moral of the story is to double and even triple check each item along the way to make sure there is no problem, is introduced into the process that eventually causes headaches during the phase of distribution of creating applications!

  -mat

• View usage type lookup does not match the object list definition drop-down display

  can someone tell me why this error could be coming:
  View usage type lookup does not match the object list definition drop-down display
  
  Thank you and best regards,
  Amrit

  Hello
  seems that in your choice list item (probably call him messageChoice), you are defiining of these properties of the list view definition and the choice list view instance.
  You must provide one. If your choice list values to all users (i.e. the vo behind the choice list has no dynamic where clause or the query), then use choose list definition property. If each user sees different options in the drop-down list (i.e. dynamic where clause for vo), use the property of the lookup instance.
  In the definition of choice list, give the fully qualified name of the vo.

  Abdul Wahid

• Harger W530 AC does not match the Jack of the portable power

  I just got my new W530, but I can't load it. Looks like 170W AC/DC charger is just, but somehow the physical connector does not match the power supply of the portable computer. Charger AC/DC 170W is not circular but with two small rectangles, however W530 is completely circular. Someone had the same problem? I try to return W530 that looks like it was made of bad sense but takes to always come back. any recommendations? Technical service told me since it is within 21 days after the delivery, I better return.

  Technical service is great

  But after the sale to get back really really bad!

  It's quad-core, it requires 170W "brick" AC load, which has one taken not circular.

• the channel guide does not match the actual string

  the channel guide does not match the actual string that is to say PBS should be Channel 13 but is listed as channel 2 on the guide

  Hello James,.

  Welcome to the community of Sony.

  What is the model # of the TV?

  You can locate the model # of the TV from this link.

  You can try the steps mentioned on the underside of the base article of knowledge:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C408137

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• Certificate error "the name on the security certificate is invalid or does not match the site name.

  When my computer after starting the antivirus and Skype loaded,.

  I recently started to get warning of security box appear. The attachments show you what I see.

  I am told "the name on the security certificate is invalid or does not match the name of the site"

  Whether I click Yes to "do you want to proceed", nothing happens.

  How to make this security alert disappear from the start-up procedure?

  Thanks for your advice

  Marty783

  

  Thank you PML

  Problem is now solved.
  Was a corrupted version of IE6, which, when updated to IE8, fixed the problem.

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

  Hi Carl_Focus_Phone,

  ·         Is confined with Update Service Pack 3?

  ·         Did you do changes on the computer before the show?

  You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also see the following articles for more information:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Let us know if that helps.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• "The file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I work with a HP Pavilion a6030n PC with Vista OS base. I had problems with the computer recently when starting. He continues to work at some point during the process and crash, forcing a hard stop. I'm not too computer savvy, but can generally work through questions. I tried several (and probably useless) methods to try to get the computer to work, with a modicum of success. Today, I received this message: "the file is maybe damaged. The file header checksum does not match the checksum calculated. "Hmmm... I looked through the forums and found a lot of computer-speak, who basically told me that I'm over my head. I thought that I would try at least ask the question before resorting to what is the hard drive a person to fix if all goes well.
  I can get it working again, or is my HP to his last breath?
  Thank you!

  If warnings getting You ' r files are corrupted, which could indicate a problem with the hard drive (most likely) or the memory/RAM in the computer (a little less likely but a good possibility).  Your computer came with a disk diagnostic or diagnostic software you can run to test the components inside?  You can also download this software and run it to see if he can help you narrow the possibilities.  Otherwise, I recommend to find a local repairman good and trustworthy and have them check for you if you are not adept at hardware troubleshooting.  It can get very frustrating and very expensive, very quickly.

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• 0xc0000221 error: Windows Boot Manager is possibly corrupt. The header checksum does not match the checksum calculated.

  Just turned laptop on a message saying... Manager of windows startup, the file is possibly corrupted, his header checksum does not match the sum of computer control. ?? File: / windows/system32/win load.exe...

  status: 0xc0000221.

  What help please this meen?

  Original title: help!

  Hi markwiggins,

  Follow these steps:

  Method 1: Run the Startup Repair

   

  For instructions, see the following article:

   

  Startup Repair: frequently asked questions

  If the startup repair does not resolve the problem, follow all the methods of these items:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  Method 2:

  Restore the system in the advanced system to a restore point recovery options menu before the show.

  For more details, see the following article:

  What are the system recovery options in Windows Vista?

  Method 3:

  Use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

   

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows