Why my screen keep switching applications in winows 8?

Similar Questions

• Why my screen keep freezing while I play facebook on my laptop?

  When you play farmville my screen keeps freezing on. The message on the my screen is on the top left corner saying Mozilla does not. I have to close the screen then re-opened with the restoration link

  Accidents or other problems with some multimedia content in Firefox (for example, Flash videos, animations or games) can often be solved by performing the steps in these articles in the Knowledge Base:

  • Flash Plugin - maintain and troubleshoot
  • Adobe Flash plugin has crashed - avoid that it happen

  Please tell us if it helped!

• Why my screen keeps blacking out? __

  I keep touching the back of the computer screen until the screen appears again.

  Having a problem of physical hardware with him (wiring loose inside, loose cable connections etc.), as you say typing solve the problem.

  Check all cables are tight.

  I suggest contacting the manufacturer of your computer, if under warranty.

  If this is not the case, contact a local reputable repairman computer.

  If a desktop computer, you can try swapping the screens to see it persisits.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 keep switching between screens

  Not "app mail" problem as shown in 'windows under heading' but no problem selected in the list for me to choose. Microsoft issue again.

  Windows 8 keep switching between windows. Word and internet or even just internet screen goes by the United Nations, highlighting the window, then 10 seconds later highlights the window again.

  Even while typing on this issue, it happens, and words and letters get spleen and loose spacing between words.

  Does the same thing when you type in a Word document, even if nothing else is running.

  I'm gone in "Configuration", 'change pc settings', 'general', off "allow to switch between recent applications" and turned off "when I drag from the left edge etc." but always keeps switching between windows.

  I removed all the 'apps' as well.

  It is not do it in "safe mode" cannot run what whether in 'safe mode' obviously, so it is useless.

  Nothing in Windows can do, so make sure you follow what you install and remove any element t - it.  If you see happen, feel free to post back and I'll work with you.

  Microsoft is no not any product that activates applications even if you do not touch the computer.  It may even be a virus.

• Switching applications during the presentation on a separate screen

  Hello

  No help available here would be much appreciated.

  I have the Mac connected to a video projector. Under system preferences / poster I have the 'mirror' screen of the Mac projector.

  I have two applications using the screen of the Mac: a spreadsheet (in mode full screen) and a Keynote presentation. I wish I could choose what is shown on the projector - the spreadsheet or Keynote presentation - and * easily * switch between the two.

  I'm having difficulties in reaching this goal. When I "play" the Keynote presentation, Keynote seems to get their hands on everything: the projector becomes 'Display format' and the Mac screen display "presenter". If, during the presentation, I need to momentarily display the worksheet on the projector, I leave the presentation of Keynote ("ESC") and to the spreadsheet on the Mac (the spreadsheet now displays on the projector). On the way back, I have to switch applications on the Mac, then press 'Play' on the Keynote presentation (the projector display now the presentation again).

  All this is fine except that it is long. It significantly breaks the tempo of the presentation session, the public gets distracted by what I do on the computer, and the emphasis is more.

  Ideally I would be able to spend what is shown on the projector (presentation of the worksheet for the presentation) with one or two at most, mouse clicks. I thought that I could do it by changing just the applications on the Mac, but, unfortunately, when the speech is 'Play' there is no way to access the docking station to change application.

  Does anyone know of a combination of Options of setting display, number of jobs defined on the Mac, the Keynote presentation options,..., which would allow this switch quick and easy?

  Thanks in advance.

  Use the application Switcher: the keyboard command is: command tab

• How to stop pop-up screen 'See the keyboard, Switch Application, full Menu'?

  Hi all

  I always get this pop-up screen when switching from one screen to the other. I don't know what is the reason for the pop up screen and how to stop it. If you have encountered this problem before and know how to deal with it please give me help.

  The pop-up screen contains the following choices:

  Display the keyboard

  Switch application

  Full menu

  Thank you very much for your help!

  I found the solution to this problem here http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&message.id=10933

• iOS iPad 2 Why is mail the only application in 9.3.3 split-screen?

  When I slide in split screen, the only application that I get is e-mail, even when it is not open.

  I do not see in settings > general > multitasking either so I can't he turn on or off.

  I tried a reboot has opened two apps and tried to perform multiple tasks to them and got new mail.

  Support is no help, so I turn to you.

  Have to restart is a last ditch effort if a device doesn't respond. Several times that aims to realign service onboard iOS based problems, but is not a visit to start troubleshooting.

  The other option is to back up your iPad, restore your iPad to factory settingsand update the Firmware.

  Once the Firmware is updated, check the functionality of the onboard service.

  If the split screen work after that, restore your iPad from a backup and that your content and settings are then restored.

• Problem of the blackBerry Smartphones switching Applications

  Hi all.  I am new to BB in general... but I can say that I wonder why it took me so long to convert!

  Here's my problem... When you press and hold the menu button, it gives you the opportunity to switch applications (home page, Messenger, phone, messages, application Center, browser, etc.).  Well all links put me to the proper place, except the center application.  When I select it, nothing happens.  The "application switching" screen disappears and I go to fullscreen I was looking at previously.  I just want that he take me to the center of the Application when selecting it.  Please help and thanks in advance!

  Note: I tried already to take out the battery and it does not solve the problem.

  OK, I got the problem!  It is not at all a difficult solution, and apparently, many users have this same problem

  Go to the center of the Application, press the Menu key and uncheck the box/deselect 'Auto Refresh List'.  Second, you must remove the battery while the phone is still on and keep it removed for 30 seconds.  Turn back on him and Viola... it will be deleted.  Make sure that the list of auto-refresh is always disabled in the Application Center.

  I guess that the reason why it didn't disappear is in the first place because of the automatic refresh running in background.  But when the setting is deselected, just restart the phone will not remove it.  The battery had to be removed for the phone to restart completely.

• I close Firefox the right way every time. Why dose he keep saying opps seems firefox crashed... Each time...

  I checked all of the updates and there is no... Why dose Firefox keep saying OPPPPPS well this is embarrassing, seems that your session broke down... Well I know not down because I close every time the right way to dose... Can someone tell me how to solve this problem... It's really annoying... Also, I tried each and everything I thought to try and nothing works...

  Hello Marlin29, this is currently an issue in firefox when you close all firefox windows open first and then close the application subsequently - the bug should be addressed in a more recent version of firefox.

  a workaround in the meantime, you could close firefox (via firefox > quit) while the browser window is still running or try this: enter: config in the firefox address bar (confirm the message information where it appears) & search preference named browser.sessionstore.resume_from_crash. Double-click it and change its value to false.

• Why my windows keep freezing?

  Why my windows keep freezing? It's funny because it started to happen after I replied to a few things about illuminati on youtube. But after that, it kept saying error post comment. So I disconnected my account and connected to another one of my accounts, and he says the same thing, so I decided to restart my computer. As soon as he started upward, my request of palringo has started up, and he stopped to load my messages. Then the screen froze, I waited 5 minutes, then held the power button and turned it off, then power on. Done that 4 times more, then finally, it got to the point where the 6th time the only thing that was frozen was the taskbar at the bottom with the Start button and the basics of microsoft security date and time which not. in any case, I could use the rest of my computer, to the point that when I opened internet Explorer, it froze. 7th time... I had taken a break before I'm back and tried this time, and it was a weird breakup cause that is also a lot of things that never happened before, but it finally worked. But my volume control panel went 'again' and it is not picking up my card soundblaster, which idk if the driver went for her or what. But I would like to help with this and perhaps a reason why this happens. I didn't download anything since the last time I have shut down my computer, everything works fine every start until this afternoon when it happened with youtube. idk if it was a virus, hacker or what.

  Hello
  Try following the steps described in the guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer.
  I hope this helps you.
  Brian

• Why any screen recorder does not work on my computer? __

  Why any screen recorder does not work on my computer?

  Hi I formatted my computer and downloaded all the conditions for this, I downloaded hypercam and installed, I tried to open it in the tool bar and the start menu, it still does not work.
  I downloaded another program for recording of the screen, it also did not work, I tried 3 programs, they all did not work
  by the way my computer: windows vista service pack 2 and the screen recorders have worked before I formatted my laptop
  I need a solution pleaseeeeee

  I got this error in the three programs

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ScreenVCR.exe
  Application version: 1.5.34.0
  Application timestamp: 2a425e19
  Fault Module name: StackHash_b4c3
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000096
  Exception offset: 02e42a3b
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: b4c3
  More information 2: d2a8bebd21e0e9bfa99e084d53ece2b6
  3 more information: 74a 3
  Additional information 4: 0480b6e0a2e7a1df44ee618ae8d0084f

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Please give me a solution... :(

  my laptop computers Info

  Windows is Windows Vista Home Premium
  Intel (r) core (TM) 2 Duo CPU 26500 2.10 GHz
  3.00 GB RAM
  Mobile Intel (r) 4 Series Express Chipset Family

  =============================================
  Just a thought... maybe your video driver or DirectX needs and update?

  Have you tried the following applications:

  (1) Windows Media Encoder 9 Series
  http://www.free-codecs.com/download/Windows_Media_Encoder_9_Series.htm

  Direct Download Link:
  http://www.free-codecs.com/download_soft.php?d=571&s=327

  First steps with screenshot
  Using Windows Media Encoder
  http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/ScreenCap.aspx

  (2) Microsoft Expression Encoder 4
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=75402be0-C603-4998-A79C-becdd197aa79

  Expression Encoder training videos
  http://expression.Microsoft.com/en-us/cc197144.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem with push the screen of an application

  Hello

  I developed an application with another point of entry. I have the main GUI application and an application that listens for push notifications. The background listener auto starts when the unit is turned on and tuned to push. When it receives the push message, it displays a popupscreen with the options 'launch' and 'Cancel '. By pressing 'start' should open the graphical application by pressing the main screen of the application. However, I get "ClassCastException" and I have no idea why.

  I looked around and the process is similar to what I did, but somehow, it does not work for me. Can someone explain or show me how to push a background application screen?

  See you soon!

  Welcome to the forums!

  I guess as you push a display context global [and maybe modal] 'launch' and 'Cancel' buttons. When you press 'start', then, you should not just push a screen - you should actually run the main application!

  To do this, you must create an application with the appropriate settings and say ApplicationManager descriptor to run it. Take a look at the documentation ApplicationManager, especially the section "running an application with different arguments. Make sure the arguments are according to the needs of your main application, not the bottom one.

  Only one problem: what happens if your application is already running but reduced? Don't worry - you try to run the same application with the same arguments will activate one already running!

  Good luck!

• ALT return switch application problem

  Hello

  I have problems with a claim on the toolbar to switch application Alt + return. I use a 8900 with v.5.0.0.592 device and the problem arises as well when the tests run in the emulator.

  The question is this. I have a few requirements of the carrier that makes us stop the sound application when the switch application bar pops up (after pressing alt + key at the same time):

  In previous firmwares (v4.6 who were the original for the 8900 device), when you perform this action, an event is initiated by the Application, so you can manage with the eventOccurred method (as the main class has an added GlobalEventListener).

  However, in this Application switch firmware don't lance not any event, and even no event is run when the application is in the background.

  You have a way to detect that the application Alt menu + back switch jumped upward?

  I also tried to detect this event in keyListener, but the KeyStatus method that recognizes the alt key does not detect let us when the levels of alt is held, just at the time when it has been activated at the same time.

  Thanks in advance.

  Kind regards

  Fabian

  Don't bother to intercept keys - there are three or four ways how a user can call the selector of the task (for example, ALT + ESC, press long the Application Switch menu item Menu key to name a few). Just follow standard practices proposed by previous posters and detect whether your application is no longer in the foreground (the events Application.activate/deactivate, Application.isForeground polling stations) or if your audio playback screen is hidden or invisible (Screen.onObscrured/onVisibilityChange events).

• How to upgrade the Switch application icon

  Hello

  I'm working on a UiApplication in Java that runs in the background all the time.  I need support the 7290, some 8,000 s and the "BOLD".  The screen resolution is very different between the 7290 and "BOLD" and the icon that looks good on the 7290 seems jerky on the "BOLD". And the icon that seems good on the "BOLD" is not full screen on the 7290, and we know, that there is a problem.  So, I followed the information contained in these two links to update my icon based on that screen resolution that we, to make my icon looks good no matter what device has a user.

  BB in Knowledge Center article - how to set an icon of overview

  BB Forum of Discussion on the overview icon

  Now on the 7290, I use an icon of size 32 x 32 pixels and on the "BOLD", I use an icon of size 64 x 64 pixels.  I know that 64 x 64 is not the recommended size for the "BOLD"... and it looks better for what I do.

  OK, so to enter some details, I have a main entry point, which has an icon associated with it (which is the icon that I have 'default', you can tell).  And it's the icon of my startup code updates (via HomeScreen.updateIcon (getHomeScreenIcon (), 0) and is what you see in the Applications folder (or on the main Menu, depending on what device, of course).)  And on the menu, when you click this icon, it brings my application in the foreground and here we go. It works just as advertised and is great.  I have the icon on the right showing on the right screen resolutions.  No problem.

  Is then where I run into trouble.  I have another point of entry, who calls my startup code and gets my application running in the background.  It has an associated icon also (once again just the icon I want 'default' before I can get the Update icon.  It is the icon that can be found on the Ribbon for switching applications (when the user presses ctrl-esc).

  And once again, in my startup code, I try to use - HomeScreen.updateIcon (getHomeScreenIcon (), 3); -Please note the different entry point number that corresponds to this entry point.  I checked the CAP file to determine the correct entry point number and this update still does not take effect.  I also tried each number from 1 to 5, no chance.  I can't get this icon to update.

  How to upgrade the icon that appears on the Ribbon for switching applications?  And if I can't be updated for a reason, how can I specify a different icon for different screen resolutions?

  Thank you, Tara

  PS. I use JDE 4.1.0.185, simulators and devices of 7290, 8100, 8300, 9000 (Bold).

  The issue of the HomeScreen.updateIcon do not update the icon displayed in the application of task switch has been resolved in BlackBerry handheld software version 4.7.0.  The only work-around from earlier versions is to have several versions of the application that are built with different application icons.

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards