Why my screen resolution keep reset

Similar Questions

• Screen resolution keeps failing at 800 x 600

  Hi all

  I have a PC with Win7 and a nvidia card which can be supported up to 6 screens.

  At the moment I have only 3 monitors all Dell U2312HM 23 inches), tied in extended mode.

  Generally, I choose the resolution 1920 x 1080, but whenever I re - start the PC, the monitors are to dual status and all in resolution 800 x 600.

  I tested the latest drivers, but still have the question

  I swapped the monitors and still have the question

  Someone at - it ideas?

  Thank you very much

  NIC

  Hello Nic,

  Thanks for posting your question on the Microsoft Community.

  I appreciate your efforts to try to solve this problem. Please let us know the following information so that we can help you further:

  You did changes to the computer before the show?

  As you already update the latest drivers for the video drivers. You can refer to the suggestions provided by DaMned PC replied Du6janvier 22, 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-changes-screen-resolution-on-boot-up/13c17468-0d70-4827-A559-dca0fa558a69

  Important this task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope the suggestions in the help of the link above.

• I have Windows 7 and I would like to know why my screen resolution will not remain when I put it?

  I need to know why there is above all the resolution of my screen jumps in and out?

  Then, I would like to know if anyone can tell me why my monitor

  He died after I turn it on?  Help

  Try:

  • Install the latest Windows 7 drivers for your graphics card;
  • check if your display requires specific drivers and if so install them (some views just use generic plug & play those)
  • check that the video cable is connected properly;
  • check that your graphics card is pressed fully home in its housing and that the necessary extra power cables him arae connected;
  • check that all the fans (CPU, graphics card, case - where they exist) are working and that the air vents are free of dust and debris.

• The DPI resolution keeps reseting itself at the lowest dpi at startup

  When the pc starts, it looks like it is loading fine then shuts off again and opens upward with the CIO of new resolution reset to the lowest... We have been adjusting and hit apply whenever we want back on the pc... I tried adjuting it over and over and he returns to the top start up...  Any help on this issue would be greatly appreciated...

  Have a nice day

  Hello ronlet,

  Looks like you may need to download a video/chipset drivers. You visit the Web site of the manufacturer of the computer to download for your make and model of pc. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Why a spare screen resolution would affect the speed of the system?

  I changed my screen resolution from 1024 x 768 to 800 x 600 to test a Web site that I built and that includes another CSS file for 800 x 600 screens. Immediately, I noticed that most of the common functions I do in Explorer - as the opening and closing of windows, goes into the secondary drive, by clicking on the menu Starrt to display programs - were almost twice as fast. The reason for this?

  Hi okieseeker,

  If the graphics card supports higher resolution, then it is one that is recommended to optimize the computer's performance.

  If you decrease the resolution, it would cause the variation in the performance of the computer.

  Hope the helps of information.

  Please post back and we do know.

• Screen resolution Reset

  I accidentally put my screen resolution to something too high, and the monitor now displays a message that says "beyond the limits". I tried to start safe mode and restart, but the monitor who always says. What can I do?

  I accidentally put my screen resolution to something too high, and the monitor now displays a message that says "beyond the limits". I tried to start safe mode and restart, but the monitor who always says. What can I do?

  Put the screen resolution
  http://www.Vistax64.com/tutorials/84291-screen-resolution.html

  Re-set DPI scale

  http://www.Vistax64.com/tutorials/84233-DPI-scaling.html

• Why go down my screen resolution

  I was updating my driver display, and when you have completed the tool I was using it disconnected my second monitor change my screen resolution of 1440 x 900 to 800 x 600. Display does not show the 1440 x 900 more option and it shows that my monitor named 'Generic pnp monitor' Please help!

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• How to reset my screen resolution?

  Nevermind, I got it.

  Hey Cameron,

  We are pleased that you have found a way to change the resolution of the screen. You can go through the article for later use.

  Change your screen resolution
  http://Windows.Microsoft.com/en-in/Windows7/change-your-screen-resolution

  Do not hesitate to contact us for any information related to Windows. We would be happy to help you.

• Screen resolution reset after plugging in the tv

  A month ago, I plugged my Dell Inspiron N7110 with Core i5, on TV using HDMI cables, the computer prompted me to change the screen resolution of 1600 x 900. I think the original was 1280 x 720. Now, he won't let not get back together with making my screen is really small and I have the flashing in menu boxes (I can hardly read, they Flash so fast) and my computer will not pages refresh, I have to do forced refreshes. I deleted the cache and still do, but the problem is getting worse. I use the Safari browser and microsoft security essentials. One had it wrong before or know what is causing all this trouble?

  Unfortunately none of them worked. My driver is Intel HD family family, was not microsoft Basic. The second suggestion, even happened as when I do it in the menu screen resolution box, my screen is shrinking. It was before the connection to the TV and full screen on a lower resolution.

  Thanks for all your suggestions H.A.V. Aravinda, we appreciate it.

  Thanks for the update...
  Have your tried to update your existing video/chepsit drivers?

  Download your video driver and the most recent update and let us know the results
  http://www.Dell.com/support/drivers/us/en/04/product/Inspiron-17R-n7110

• E540 + Dock among Pro - max of the external screen resolution is 1280 x 1024

  Hello

  This issue could be discussed and resolved already somewhere else, but I couldn't find a match for my situation:

  I recently bought the ThinkPad E540 with Pro among docking station, in which I have connected my external LG Flatron IPS236 monitor. LG max resolution is Full HD 1920 x 1080, but for some reason any the max of my external screen resolution is only 1280 x 1024. The screen is connected to the station Pro among DVI port. I have two day of the graphic card drivers and the LG monitor drivers and started the system. I also tried using 75 hertz and framerate of 60 Hz, but without any help.

  What should I try next?

  HA, I finally got. Research on the subject long enough, revealed the cold made that updated Lenovo systems do not provide you with the last set of drivers (graphics card). On the contrary, it prevents actually update you the drivers downloaded from the provider (Intel) site. * beep *.

  So was the solution for this:

  -Remove the display card drivers (Device Manager / display adapter / preferences / adapter / uninstall)

  -The latest drivers downloaded from the web site of the hardware vendor intall

  BUT PLEASE NOTE:

  Just after I had uninstalled the original display card drivers both the external display and the display of the desktop became black. I had to reset my computer and start Windows Mode safe, where I was able to install the new drivers.

  Now my question for Lenovo is: * beep *.

  Why is - that you can not simply to allow installation of the latest drivers from map display through your own update system OR simply give users the ability to update the original adater than newer display drivers.

• Display HP 500 MT b screen resolution

  Display resolution of the screen does not stay at zoom 150 more. It keeps coming back to a small font size 100 zoom. I've already updated the drivers.

  I have tried these things.

  How can I get my screen resolution to stay in a 150 police? It keeps zooming to 100 whenever I Browse. I downloaded the update video drivers (who doesn't), I tried Panel & alt + v I have Windows 7 Professional on a HP 500 b Mt. thanks.

  It will be used by default once you navigate away from the page that you put the zoom on.

  1. In Internet Explorer, click on Tools and then click Internet Options.
  2. On the general tab, click accessibility.
  3. Select Ignore colors specified on Web pages, ignore styles specified on Web pages policeand checkboxes ignore sizes police specified on Web pages and then click OK twice.

  See step 2:  Customize the police, the size or color of any element of Windows

  http://support.Microsoft.com/kb/310543

  And, finally, this involves editing the registry.  Don't forget Windows registry backup before making changes:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Open Regedit and navigate to HKEY_CURRENT_USER Explorer\Zoom.

  In the right pane is a list for ZoomFactor.

  Double-click it and click on the button next to Decimal.

  Change the value of 100000 to 150000, click OK and exit Regedit.

  Now whenever you open IE, it should be zoomed about 150%. This will also zoom all new tabs open.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/reset-the-default-zoom-setting-on-IE-8-from-100-to/4d8969b0-E903-46E1-bbb7-4c206b71ee32

• Permanently change default screen resolution - Win XP SP3 Dell Laptop

  I have a customer with a dell laptop Inspiron 1501, Win XP SP3.  This is the default resolution is 1280 x 800.  She has eye problems and needs of 800 x 600.  The PC keeps reset to 800 x 600 in a ramdom model apparently.  How can I get this stay in 800 x 600?

  Hello

  Follow these steps and check if that helps:

  Step 1:

  I suggest you to update the latest display drivers and then try to change the resolution of the screen and check if it helps:

  http://www.Dell.com/support/drivers/us/en/19

  Step 2:

  See this article to change the resolution of your computer screen.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_361144&isLegacy=true#Issue1

• Windows 10/ID inconsistent CS6/screen resolution?

  I have a weird problem.  Use the software on adobe for years and this has just started happening when I got a new computer and upgraded to Windows 10.

  I keep my screen resolution to 125% because I need to the larger text, etc.  In Windows 10, I find that Photoshop and Illustrator work well with the resolution of 125%, but InDesign is HUGE and fuzzy.  I have to lower the resolution of the screen at 100% to discern the elements on the screen, but everything else is tiny and I can't go from one program to the other, what I do often.  This means also having to change the resolution of the screen again and again throughout the day.

  My computer guy said that ID behaves correctly although AI and PS not, even if they are the ones that I prefer the size. Here is a screenshot of the character side by side palettes (PS, HAVE, then ID) to 125%.  The versions of Photoshop and Illustrator are clear and easy to read, but the InDesign one is unclear and too much.

  Does anyone have a problem with this or you know a solution to fix?  I don't know why it just started happening that the move to Windows 10.  Do you think that Mobile ID CC would help with this issue?  (I know... I'll have to do later, but this means a lot of work with the already recorded in ID CS6 files, so I am not impatient for there.)  Thanks for any help anyone can give me!

  GS

  

  Why switch to CC means a lot of work with files sooner?

  I might try the tests and see if they help with the issue. The user interface has been updated for HiDPI screens.

• Flash CS4 ActionScript window larger than my screen resolution!

  I launched Adobe Flash CS 4 and the ActionScript window. Then BAM! height of the window of the actionScript takes my entire screen (please see screenshot). Anyone know how I can put across this window?

  My screen resolution is maxed out (1680 by 1050), not a small resolution I guess. I tried to move my taskbar to windows on the side and still can not move my cursor so that I can reduce the width.

  Thank you

  The best solution is to set up a workspace. I have the same problem all the time and not only with Board actions, but with the library, exit, etc. Just ask panels how you like, then I think that its the window in the menu item, it should be a work space and a new. Then, if your screen gets messy you can 'reset the space work' and he's going right just as you wish.

  Also, if you don't have a game already, you can apply just one of default workspaces and must be resized properly things for you.

  I have no why they do not resize from the top to the left, its stupid...

• Apple tv 4G - no charge aps and keeps resetting

  HI - I've just set up my new apple 4G on my existing apple account and I am surprised to see that there is no aps loaded on the main screen as it is with my 3G (e.g. ESPN, netflix, NHL, HBO, etc.). There is only standard he films/TV/Aps/photos/itunes bar and below this research alone, computers and settings.  Anyone know how to get this laoded up?

  In addition, the screen keeps resetting back (expel) to the main screen when I go in the options.  Not sure if thisnis associated with the foregoing.

  Any help much appreciated.

  Hello. There should be an app store on the home screen. You can use it to download applications for the services you want to use. It's a little awkward at first, but this means that the applications are easily updated and new ones can be added without updating the whole system. The whole system is very similar to an iPad or iPhone now.

  Going back to the home screen, the remote Menu button actually works as a button 'back', and you can save on an application on the home screen. There's a line here https://help.apple.com/appletv/ user guide, and you can also download in iBooks.