Why my update of the laptop used

Similar Questions

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• Want T15 - J100 Quad Edition Tou: recover the BIOS of the laptop using an external storage device

  So, from the start of my screen is empty and Caps Lock flashes 2 times.  I tried the Windows key + B + power key without success as indicted here:

  http://support.HP.com/us-en/document/c02693833?JumpID=reg_r1002_usen_c-001_title_r0003

  I tried to recover the BIOS with an external storage device but HP's Software and driver download page does not have BIOS updated.  I've updated for Windows 10.

  Where is the BIOS update that is supposed to be here? :

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-J100-Quad-Edition-Notebook-PC-series/6521...

  This model seems to have a lot of problems with what I find it everywhere on the internet, but the solutions all return to the download of the update of the BIOS.  I noticed that I can download an update for Windows 8.1.  Are there not one for Windows 10 yet?  Can I use the 8.1?

  The BIOS in the list of drivers of Windows 8 is the last exit for your model. You can use it regardless of the operating system because the BIOS recovery is run outside of Windows.

  BTW-to help the Windows key + B keys. When you press and release the power button / continue to hold the buttons for a few seconds see if BIOS recovery screen appears. I know that it is different from the document - but try it.

• How to put restrictions into the laptop using the domain?

  Hey! I want to know how to put the restriction in my laptop using the domain. While I may restrict the use of the USB into my laptop?

  Can U help with this.
  Kaifi Asif

  I am not sure that the use of a domain is specific to the type of restriction being attempted.

  A pindrive is usually a USB type device that is inserted into your local system. With this ability, or other devices can be inserted and used. Areas tend to assign all of your computer to a specific network, usually hosted by your company or the cloud. Areas rarely restrict the use of the material.

  For material restrictions, your company or other provider will usually deploy a security product for your local device. It can be configured to prevent the use of the spindle-disks, external hard drives or other types of media that allow the storage and retrieval of information; all by allowing the use of devices without storage type (types of wireless keyboard/mouse).

  Of course, Windows 7 allows you to join a working group and which allows sharing data from other systems, but is not a network "domain." Those are centrally managed by network/firewall servers and network administrators.

  If the device is a personal device, then there are products that can be purchased allowing the locking of the external media storage devices; they run at first upward and once installed, don't allow external storage devices to use once it is uninstalled. All this happens in the background.

  There is however a very radical measure, and this is to turn off the USB port at the hardware level. This however, would prevent ANY type of USB device to work in this port. This type of restriction is probably is not the right course of action.

  I hope this helps...

  Good luck!

• update of the lookup using the fusion query table

  Hi Experts,

  My requirement is, we have total 4 tables called x, y, z and a_lookup table. join between these tables column is deptno.

  I need to update a_lookup table based on less than the conditions of the

  condition1: table a_lookup update with the corresponding records of X and Y

  condition2: If there is no record in X does not match, then we have to compare with Z and update the table a_lookup accordingly

  Here is the table scripts and my attempt as well.

  Only doubt is, is my fine appearance of MERGE statement, or is it otherwise better update the a_lookup table?

  Please share your ideas on this.

  create table x (empno, deptno number);
  

  -Samples

  Insert into x
  Select the level, level * 10 double connect by level < = 10;
  

  create table y (empno number, number deptno).
  

  -Samples

  Insert y
  Select the level, level * 10 double connect by level < = 5;
  

  create table z (empno number, number deptno);
  
  -Samples

  Insert into z
  Select the level, level * 10 double connect by level < = 10;
  

  create the table a_lookup (empno number, deptno_lookup number);
  

  -Samples

  insert into a_lookup
  Select null, level * 10 double connect by level < = 10;
  

  -Merging of records in a_lookup based on X, Y, z. using right outer join on X and Y

  Fusion in a_lookup one

  using the ((select x.deptno, x.empno from x, y where x.deptno = y.deptno)

  Union of all the

  (select z.deptno, z.empno in z, (select x.deptno from x, y where x.deptno = y.deptno and y.deptno is null) res1)

  where z.deptno = res1.deptno)

  ) res

  on (a.deptno_lookup = res.deptno)

  When matched then

  update set a.empno = res.empno;

  See you soon,.

  Suri ;-)

  Like this

  Fusion in a_lookup one

  a_l'_aide_de)

  Select deptno nvl (a.deptno, z.deptno)

  empno nvl (a.empno, z.empno)

  z

  left

  Join them)

  Select x.deptno

  x.empno

  x

  left join y

  On x.deptno = y.deptno

  where y.empno is not null

  ) a

  On z.deptno = a.deptno

  ) b

  on)

  a.deptno_lookup = b.deptno

  )

  When matched then

  update set a.empno = b.empno;

• Why is updated to the WORST update today, most excruciating history of Firefox?

  Auto update this morning

  Since then, I feel the worst, slow, excruciating experience ever

  I use Firefox since the beginning - how many years is it? This is my favorite - browser err, was...

  I'm about to switch to Chrome, if I have to wait about 30 seconds for the pages to load

  Gmail keeps complaining about a shutdown script

  Help, please!

  I've identified the problem!

  I've disabled all extensions and plugins, then works them both.

  The culprit is AN extension: Firebug 1.11.3

  With everything on except Firebug, my performance on this system is OK

  In addition, when I activate Firebug, performance goes in the toilet

  Disable Firebug and the performance is OK again.

  Oddly enough, my home PC XP finally updated for Firefox v21 yesterday office. This, also, use Firebug.

  I have had no adverse performance on this another XP PC

  Please, advise.

  Thank you

• Suffered the laptop using the recovery, but now only see 1 hard disk, not 2 disc

  Hello

  I used the system recovery disk to erase all the data on my laptop and re - install Windows Vista a-fresh. I used to have two hard drives (C and E), but now when I restored it I have only one.

  Should I just stick with it like that, or I can re - create the division?

  Thank you

  kjh888

  Hello

  What model of laptop do you have?
  With 2 hard drives do you mean 2 hard drives or 2 partitions on a HARD drive?

  The point is that recovery disk formats the HARD drive and erase the partitions created on the HARD drive, so if you had a partition, then a recovery disk can delete it from the HARD drive.

• Flow iPod to the laptop using toshiba a2dp

  Hi, ive tried to use my computer toshiba laptop as speakers for my iPod.

  It's an iPod touch 2g with OS 3.0 and I tried with a BT headset, so I don't know for sure it can broadcast some audio a2dp.

  As I understand it the ability to profile a2dp-sink is present in the bluetooth stack toshiba (see http://aps2.toshiba-tro.de/bluetooth/?page=toshiba/supported-pc-bt-profiles, which clearly shows the A2DP (A2DP-sink; A2DP-source))

  Has anyone makes with the toshiba driver? I know its possible using Bluesoleil stack, but that usually recognizes my BT chipset on my laptop... and I would better use the original drivers.

  I'm on windows7 rc1 x 64 (which is essentially the same as vista).

  Am I missing something? I need a 3rd party app to act like the sink a2dp and reading?

  Help, please.

  I have not tried with x 64 but with x 32. Currently the audio stream is transmitted to the microphone for laptop, so I used a free tool to send the stream to the speakers.

• How to install my BT stack for windows on the laptop using Windows Vistta SP1

  When I try to install my newly bought USB Bluetooth adapter (CN-512/521 v2 001) on my laptop from another production that has an operating system of Windows Vista SP1, it will help not make me, saying "Bluetooth Stack for Windows incompatible with this version of Windows, please check with Toshiba - contact Toshiba on upgrades or other possible solutions to make this program compatible with this version of Windows.

  But when I was directed to the Toshiba site I could not find any help or advice on this subject. Can someone tell me what to do?

  You are right. Use at least 5 or later if you want to install a Vista. Visit the website of the seller adapter USB Bluetooth if a newer version is available. The version on the Web of Toshiba Bluetooth site is customized for these books, and not as a result of your hardware.

• Can not recover the laptop using the recovery disk

  Hello.

  I want to reboot my Toshiba laptop and I inserted the "Recovery" CD and you press F8 and went on the Help menu, and when the list came I clicked on one who said about to restart my PC and lose all the data and then I clicked on "Restart" and rebooted the computer and the drive was in but he just came back as usual.

  What should I do? I tried all the other options and they all work as usual.

  What should I do? What I have to press something else?

  Any help would be appreciated, thanks.

  ~ Confused ~

  To be honest after reading your ad, I am more confused you.

  Can you please tell us what phone do you have?
  F8 and disc into the optical disc drive. Sorry, but something is wrong with that.

  Either you can install Vista again using image stored on the HARD disk (option repair my computer of F8) or use facilities Toshiba recovery media. There is no sense to use both at the same time.

  Please you the necessary details.

• How can I update all the constants using a typedef automatically?

  I'm about to build a statemachine and State enum is a control of the typedef.

  Many constants are placed to the next 'State' using this typedef.

  Whenever I have modify the typedef enum, all constants become "pale" and I have to manually update, each according to the typedef even if the automatic update option is selected.

  What I am doing wrong?

  

  Close the type definition file (ctl) should trigger the auto-update feature.

  Felix

• What are the alternatives to the update of the indicators using nodes of property?

  Hello

  I'm building a VI that must update several controls/indicators in several points throughout its execution. It must also be able to accept the new values of the controls at any time.

  The problem is that all these controls and indicators on the face before of the VI another who called my VI. The current version of my program updates all these controls and indicators using references and property nodes (each indicator/control to be used has its own reference on my VI control, and these references are then sent to nodes of property), which makes it naturally slow.

  At the moment I plan to rebuild my VI so that the principal is able to recover data without the help of the references, but it is not only a lot of time but also difficult and impossible without my code turning into a massive pile of disorganized (especially since the lab computer is quite slow and the main big enough VI that by pressing the button "clean/re-organize block" causes a crash).

  Alternatives to this? Queues?

  This (my nugget events) is the best general solution, I came here.

  Felix

• DeskJet 2540 all in a series: connection to the laptop using WiFi.

  Installed a new deskjet 2540, use WiFi, on an old desktop running Windows XP. Now try to install it on a laptop running Windows 8.1 but get an error message indicating that it cannot read the software from the disc so impossible to install the printer. Ideas please

  Hello @Mike90, thanks for the reply!

  First of all, here are some Windows 10 resources for you to review;

  • Guide to upgrade Windows 10 for HP printers
  • HP printers that work with Windows 10

  Mike90 wrote:

  Don't think it's my AntiVirus because I run the same on my old desk.

  Security software installed on your computer is designed to protect your computer against threats, but sometimes can block communication between devices and can cause problems when using your printer or install the software.

  A quick troubleshooting technique is to disable your firewall/antivirus and see if the problem goes away. Remember to re-enable your security later.

  You can see the category 'firewall and software provider specific security information' of this site; Security and firewall information if you would like more information on your security software.

  When you have downloaded the software fact all-in-one HP Deskjet 2540 Printer series full feature software and drivers - download version 10 of Windows?

  

  I would try this;

  1. Unplug your USB cable.
  2. Click on the Start Menu, find and open devices and printers.
  3. Right-click on any printer that refers to this model, then click on remove device (so delete all HP Deskjet 2540 s in here)
  4. Then repeat installation, unplugged the USB cable and see if the installation detects the printer already on your network.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• After the updates of the laptop, printer does not print photos

  Until yesterday, I had no problem with printing photos from my laptop.  Automatic updates have been made, and now I can't print photos.  There is no problem with printing documents well.  The office prints documents and pictures ok.

  Now for some reason any cell phone shows a new and different screen for printing.  I click on the image to print, but after a minute, it goes back to the screen asking me how I want to print my photos.

  My laptop is Dell with Vista.  I have a wireless connection to the printer: printer is HP photosmart c5580 all-in-one and it is connected to a desktop Dell with XP.  I had this setup for well over a year with no problems.  It seems that something in the updates yesterday can cause a problem.  Please help I need to print these photos as soon as possible.

  Thank you.

  Sometimes the MS Updates will install hardware
  pilot who is not as compatible as you
  already had. Is it possible that a printer updated
  driver has been installed on your Vista machine?

  It might be worth a try to do a system
  Catering to one hour before the beginning of the question.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Windows Vista - start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

• How to send by fax the laptop using the network all-in-one printer

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

  Your all-in-one printer supports this feature?  Check its manual to see if it does.  Just because it is connected to the network and contains a fax equipment does not necessarily mean you can send a document to him and use the fax to send to someone else.

  'Surace' wrote in the new message: * e-mail address is removed from the privacy... *

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop