Why my volume goes up and down during playback of music on YouTube?

Similar Questions

• Volume goes up and down during playback on Qosmio G55-Q802 MP3

  I just bought a new laptop from Toshiba with Vista Home premium.

  When I'm playinh of MP3 files, the volume goes up and down.

  When there is a soft part in the song the volume increases and when instruments of start to play more strong volume goes down.

  Can anyone help me please with this problem?

  Hello

  First of all, it would be really interesting to know which laptop model you have

  In addition, I would like to know if you have tested the MP3 files using different actors

  Have you noticed the same sound problem using WinAmp or another free software?

  Check it!

• During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it?

  During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it? All the drivers are up to date.

  Hi EBmusic,

  I see that you have a published similar thread .

  ·         Have you tried suggested the same steps?

  Try the suggestions and see if it helps.

• I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

  I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

  Manually delete the cache of the preview of your user folder.

  Mylenium

• Premiere Pro CC (V.8.0) slow and crashes during playback

  Question:

  Premiere Pro CC (V.8.0) extremely slow and crashes during playback. My video will not play unless I make (which is not a problem). I made all my clips and try to read. It usually allow me to watch the first time around. After that, the program hangs or becomes extremely slow. I even had a blank green screen pop up on my screen. Sometimes, the program will generate the message "a serious error has occurred" and stop. Other times, the program just locks himself. I'm not under all programs except by email.

  Here is what I tried:

  Cleared all my cache files

  The value of my reading of mercury 'software only '.

  After doing the above, restarted the program and the computer.

  Don't made sure I had no RGB curves effect (as I saw it was a question of other threads)

  Remove all unused images

  Delete all files rendering and a new rendering.

  I'm editing of images requiring a Ultra key. I use a Three-Way color corrector. My video is not even 1 minute long, so I think it would be easy return and reading.

  Here's what I'm trying (I know I need an upgrade - hoped after this client project):

  MacBook Pro 2008

  Processor 2.4 GHz Intel Core 2 Duo

  Memory 4 GB 667 MHz DDR2 SDRAM

  Graphics  NVIDIA GeForce 8600M GT 256 MB

  Software  OS X 10.9.3

  Help! This is seriously slowing my workflow and my project is due tomorrow. Any advice would be appreciated.

  I am Windows but I saved some Mac links that can help

  -Next link says After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

  -Activate the user Root Mac https://forums.adobe.com/thread/1156604

  -l' Root user more http://forums.adobe.com/thread/879931

  - and more user root http://forums.adobe.com/thread/940869?tstart=0

• while shooting pool on directory, use the pointer to draw the ball, that the screen goes up and down

  When I use the pointer that the screen moves up and down I want to trun off

  Hello ron crabtree,.

  This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

• Why my screen jumps up and down unexpectedly in Vista?

  my screen jumps up and down even if I do not use my mouse. When I try to set the screen from left to right, it slides to the left again once he will not stay in place.

  Hay thank you very much for your help, but the laser mouse was broken.

• Try to get a clip at a time going up and down depending on which button is clicked

  Hello

  I have a file with 5 video clips inside. I have a button that when it clicks, play each other. One of the film clips must also well up and down and I'm having a lot of trouble with that.

  Stop();

  function showVenue(Event:MouseEvent):void

  {

  mc_speaker. Play();

  }

  function showSpeaker(Event:MouseEvent):void

  {

  mc_compliance. Play();

  }

  function showCompliance(Event:MouseEvent):void

  {

  mc_strategic. Play();

  mc_data. Play();

  }

  function showStrategic(Event:MouseEvent):void

  {

  mc_data.gotoAndPlay ("Down");

  }

  function showData(Event:MouseEvent):void

  {

  mc_data.gotoAndPlay ("up");

  }

  btn_viewMore_Venue.addEventListener (MouseEvent.CLICK, showVenue);

  btn_viewMore_Speaker.addEventListener (MouseEvent.CLICK, showSpeaker);

  btn_viewMore_Complinace.addEventListener (MouseEvent.CLICK, showCompliance);

  btn_viewMore_Strategic.addEventListener (MouseEvent.CLICK, showStrategic);

  btn_viewMore_Data.addEventListener (MouseEvent.CLICK, showData);

  Y at - it to attach my file here for someone to look at anyway?

  Thank you!
  Babs

  to control the visibility of a movieclip, you can set its visible property to true/false...

  mc_data. Visible = true;  Show it

  mc_data. Visible = false;  hide it

• Update graphics and photos during playback from the timeline

  This problem appeared all of a sudden, and I can't understand why or how to fix it. Here's the situation:

  • I have a video clip on track 1 and a graphic or a photo on track 2 (the problem occurs with any kind of graphic file or photo).
  • The graphic or photo is in its correct position when there is no activity on the timeline, but it suddenly shifts its position during playback and scrubbing.
  • Once I stop playback or rub the graphic or photo is in its place.
  • The same thing if I drag the position or the value of the scale values in the effect controls panel.
  • If I exit the chronology, the graphics in the output video are in their correct place.

  Here is a video screenshot showing what is happening: https://youtu.be/4vbrwEDsjS4

  I tried dumping the preview files, and this makes the problem go away for a few minutes. Then the same problem reappears.

  Any help with this problem would be greatly appreciated!

  -Ken M.

  I'm not at my computer editing now, but I think it's project > settings > General in the menu.  Choose the only rendering software.

• Windows Media Player-video stops and starts during playback

  video

  during playback of a video clip online it continuously stops and starts. I have windows media player.

  What is your internet connection. If the connection is not fast enough, it will happen.

• His jerky in Windows 7 and Realtek audio during playback of music - after the release of sleep

  Hello

  Lately I'm encounter problems playing music on my desktop PC and my house. My desktop PC is x 64 bit my home PC is x 86. What they have in common is a NVidia card (7300 on my PC at home while 9600 on my desktop PC) and MoBo integrated Realtek Sound Chip. The systems are up-to-date, the drivers are updated via the automatic updates. When I feel his jerky, I reboot the comptuer (s) and its good to happen for a few hours. I have no idea which can be triggered to become again a bit rough sound. Sound is at once during playback of movies using Windows Media Center (on my house cause of PC I don't watch movies at work lol: D), when you listen to music using media player or Winamp. Even when I'm not touching the PC so there's no great animation on the screen. If I turn off improvements in the sound Control Panel Applet, the sound is not so rough but will not solve this problem completely.

  Software that both computers have in common:

  • TeamViewer, Mikogo
  • Skype, Yahoo Messenger, Windows Live Messenger (rarely signed), Google Talk (still signed to)
  • NCP Secure entry Client (using actively at work, I already uninstall-ed on my PC at home, the sound still jerky)
  • VMWare Server ActiveX control installed through IE (already using actively at work, uninstall-ed at home, always choppy sound)
  • Last.FM, Windows Media Player, Winamp, VLC, Miro
  • Wuala
  • uTorrent
  • Daemon Tools
  • RDTabs
  • Picasa
  • FFDShow
  • 7-zip
  • SmartDefrag
  • Office 2007
  • Visual Studio 2008, SQL Server management tools
  • SpeedFan, HWInfo32

  Suggestions to better diagnose the problem? It's kindda boring.

  Thank you
  Levi

  For those who have this problem and want to see if this resolves for you too: Click on your start ORB, type "services", press on enter, find and restart the "Microsoft Antimalware Service.  Turn on real-time protection if it is always disabled and performed before.  Check your sound, and it should be fixed!

  Vincent,

  I thank very you much for the suggestions!  Finally, some useful tips!

  I used FADS latency Checker and received peaks of 27,000 when he started to be choppy, 50 000 when it was quite rough, and really bad it had reached its maximum about 75 000 - 80, 000.

  When not jump and everything seems fine, as after a restart, the spike is not even go above 500 (if so, rarely and much higher).

  I know that material resources was not my prescription, as I am running out of 8 logical cores of 3 GHz and have 6 GB memory triple channel high speed of at least 50% most of the time.  When the bad audio dropouts are produced, I confirmed this (0-3% cpu usage) and 3 + GB available physical memory, even with my page file off to improve performance.

  While the auditor of latency DCP everything was in the Red (high values), I started through my services running and restarts, one by one.  Then I got to 'Base filtering engine', which has a description of: "the filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications. "I proceeded to try to restart, which pops up a message saying that 3 other services will also have to restart to restart: IPsec Policy Agent, the Windows Firewall and Microsoft Malware Protection network pilot.  I clicked 'Yes' to restart all of them, and after a few seconds, windows tells me "Windows could not stop the engine service of filtering based on Local computer.  Error 1051: a stop command was sent to a service that depend on other services running on. "If I click Ok and I look in the STC audit program and my latencies are all still red way and reading too high.  At this point, the windows firewall is disabled, all other 3 services work well.  So I try to restart again, and he succeeds.  Instantly, my auditor DCP is back green and low numbers (<500) and="" all="" audio="" skipping="" has=""> I still don't know what Department it is, because it could be these 3):

  1. the base filtering engine of
  2. IPsec policy agent
  3 Microsoft Malware Protection network driver

  Update:   Now that my sound was turned off again, I have to debug more, but I can't even see the third listed throughout the services, either on or off the coast, but restart the Policy Agent IPsec has nothing.  I restarted Microsoft Antimalware Service since he was the only one that sounded related to #3 above, and that did the trick, DCP levels and without legs instantly fell more.  I always do the same thing every two days or so, or sometimes once a day (depending on how much I use my audio...? maybe?)

  So, does make sense that this service could cause problems?  This means that it is not a driver - correct problem?  If this isn't a Realtek driver problem then it is matter of microsoft and will be fixed - this is their service and software that appear to be the cause of the issue / conflict with the driver.  I guess it could be either a problem, but the realtek and microsoft can fix it if they want to!  It would be nice not having to do now almost every day just to use the sound

  Thanks again Vincent!

• Tecra 8100: stutters during playback of music

  Hello

  After installing Win2k on my Tecra 8100 each works fine but playback of music.
  When play is a stutter, a clickening every 2 seconds.
  It is a general problem, not a problem of the music program or file that I play (mp3).
  It already starts with the beginning of Win2k jingle.

  Any ideas?

  As far as I know that the device is supported for W2K Professional and if you have used all the drivers designed Toshiba it should not be a problem (if the hardware is not faulty). Please check with a helmet. It will be interesting to see if the problem persists.

  Have you had it with previous operating system? Do you have it tested with a helmet too? Can you please post more than a few sentences? You already did some troubleshooting and what exactly?

• Noise rattling during playback of music files on my Satellite U500 - 18 p

  Hello world!

  I have a problem with the sound of my Toshiba Satellite U500 - 18 p.

  I bought 4 days ago and suddenly found himself that music files and even system sounds make rattling in portable speakers and headphones also. I have not modified parameters. It is strange that the same files of music sometimes a good sound and next time when I play them they produce loud clicking.
  I tried to install the new on official website of Toshiba sound card drivers, but the problem is still not resolved.

  Please help me if you know what to do in this case.

  Hello Lidia

  The laptop is all new so don't waste your time with such experiences.
  Install the OS by using HARD drive recovery option - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm - and test it with the own operating system preinstalled.
  If the same thing happens again, contact your local dealer, explain the situation and ask for Exchange.

  I have Satellite U500-1EX and until now his and everything else works perfectly.

• Sound goes up and down in the HP Envy m6-1105dx laptop bat

  Yes, Hello.

  I just bought a hp envy m6-1105dx (windows 8) yesterday and I was put in place, I realized that the volume of the music in winamp told fort suddenly and they went there. It happens with all the songs. I downloaded the new drivers but the problem is still there. I've read about this problem in other types of laptops want to, but I don't see anything about my portable individual. Any help will be appreciated. This problem is started to irritate me.
  I hope someone can help me. Thank you.

  Yes, thanks for the help, but I found a solution that works for me, thanks to KGB999

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio-e-g-Windows-8/volume-swings-during-songs-with-beats-audio-enabled/m-p/2292249#M32895

  If a lot, you have problems with you audio just follow these steps:

  Follow these steps:

  (1) press on [Windows] + [X] on your keyboard and go to Device Manager

  (2) go to the sound, video and game controllers

  3) click IDT High Definition Audio CODEC

  4) click on the driver tab

  5) click put updated driver

  (6) select Browse my computer for driver software

  (7) select Let me pick from a list of device driver on my computer

  (8) select it Audio device high definition

  (9) to read the warning and click Yes if you understand the risk

  (10) restart the computer

  When your computer restarts:

  1) click on the Control of the Volume (speaker) in the bottom right of the taskbar.

  2) click on speakers

  3) click on the enhancements tab

  (4) If you do not know a lot about audio and to help prevent speakers, earphones, ear lesions, click the Equalization of the volume and click settings, and then move the slider to 3/5-4/5 in the direction of Long, then click OK and apply

  5) enjoy its AWESOME.

  BE CAREFUL, the sound of unlocked chip IDT is VERY STRONG, and based on my experience in audio engineering, I wouldn't recommend listening to it more 45% volume without the Equalization of the volume turned on.  I'm listening to a modern CD and without the limiter and compressor, 50% by volume, border level EAR ENDOMMAGEANT level on my helmet.  Also, without the pre-installed, limiter high volume CAN DAMAGE YOUR SPEAKERS.

  A little bit of my solution:

  This solution essentially replaces the IDT pilot with a Microsoft driver.  If you damage your laptop using, your warranty may does not cover repairs, so please, please, please use the limiter or prudent.  On the same note, don't damage you either; hearing loss is very difficult to self-diagnose, because you lose hearing gradually by the loss of sensitivity to higher frequencies.  It is not 'feel' special, just somehow, you notice that you stopped to hear the singing of the birds and leaves rustling a day, in order not to blow your music.

  Finally, I'll probably revisit this solution some time, as I prefer to use the IDT pilot and have my EQ work.  This is possible through the IDT folder in Program Files and hacking essentially parameter files in a text editor, but it is rather tedious and complicated.

• I have a blue line on the left side, going up and down my screen.

  I have an iMac 21.5 inch late 2009 model and running El Capitan V. 10.11.6. My problem is that I now have a blue line that extends from the top of my screen, starting to the right of 'File' and runs all the way down. The only thing I did recently was last updated iTunes on 18 July and I updated on July 20 of the OS that was yesterday.

  The single trouble shoot I did is off my computer for a few hours. However, the line is always there. Someone at - it this experience? I have attached the Image after reboot of my iMac.

  

  Have you tried a system management controller - reset?

  Reset the management system (SCM) controller on your Mac - Apple Support

  This reset also covers certain aspects of the resolution of the screen:

  How to reset the NVRAM on your Mac - Apple Support

  Not sure if the symptom is indicative of the material cause; using above

  Links may be able to solve the problems, and then decide if a visit to the CENTER or

  Apple Store (engineering) for inspection would be wise.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  I hope that a reset or other aid.

  Good luck & happy computing!