Why my wifi does not lose connection every 15-30 seconds?

Similar Questions

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Why my WiFi does not substitute my internet LAN?

  I have two computers at home: a laptop and a desktop PC. The laptop connects to the internet by WiFi, and connects the desktop PC by LAN. My problem is that the LAN does not work when WiFi is on, despite two static IP addresses (address of the laptop ends in 34 and 35 office). LAN works ok if the Wifi is turned off. As soon as the WiFi is turned on and connected, I can't access the internet with the desktop PC.

  How can I fix? Is there a setting in the router that allows WiFi replace the LAN?

  The laptop is a Toshiba Satellite Pro A10 and the router is a ZyXEL P-660HW-T1 v2.

  Thanks in advance.

  Hello

  I didn't put as static IP addresses, but the IP address must be assigned automatically.
  I mean the router supports a pool of IP addresses and usually the IP address will be automatically assigned

  In order to check the settings TCP/IP LAN and WLan TCP/IP you should find it in the properties

  Notes; the IP address must be assigned automatically by the router too in order to check the configuration of the router settings.

  Welcome them

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer.  I made attempts at veveral to install it and I lose connection every time.  Since I was on a package of data plan with at & t, I buy e data

  Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer.  I made attempts at veveral to install it and I lose connection every time.  Since I was on a package of data plan with at & t, I have buy the data each month.  I consume ALL my data.  To be a better way. Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer.  I made attempts at veveral to install it and I lose connection every time.  Since I was on a package of data plan with at & t, I have buy the data each month.  I consume ALL my data.  To be a better way.

  I am well aware I could you bought the disc version. I bought the software Officemax in Vicksburg, MS I thought that the disc was included in the box.

• Capsule WiFi does not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  I'm pretty confident that the problem is with time capsule, the wifi works with the other router.

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• WIFI does not work on my Satellite L650D

  Hi all...

  On my laptop, the wireless light is orange and won t work...
  When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
  Anyone know my problem?

  Thank you

  Hello

  I guess that LAN connection works properly and you can access the internet using LAN.
  But the WiFi does not work even if the WLan light is on. Is this good?

  I m wondering if you have activated the WLan with the FN + F8 keys.
  Have you tried that?

  You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!

  You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.

• WiFI does not work on Satellite M105-S1021

  My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.

  WiFi does not work on this laptop, even with the switch at the front, running and when I put in a USB WiFI module with an external antenna I get a very bad signal from my router wireless in the next room< 20="" feet="">

  Hello

  I found the specification for this old Satellite M105 series data sheet:
  [Satellite M105-S1021 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1372978& rpn = PSMA2U & modelFilter = M105-S1021 & SelCategorie = 2756709 & selFamily = 1073768663]

  Looks like the laptop was equipped with a map of Atheros 802.11 wireless network b/g.
  If your internal wireless network card does not, even if you have enabled the external WLan switch, then I recommend check device manager first check that the area of Wlan Card network adapters usually map Atheros Wlan must be there if its not listed, install the Atheros Wlan driver

  In addition, next to the switch hardware Wlan, you need to activate the WLan using Fn + F8

  Regarding the USB dongle and a weak signal of Wlan:
  Well, maybe the USB dongle aerial signal is too low on the other hand you should test connectivity using 802.11 B or 802.11 G standard only

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• I upgraded Qualcom Ateros and now my wifi does not work.

  Original title;

  I upgraded Qualcom Ateros and now my wifi does not work. How is it?

  I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...

  Hello

  1. what operating system is installed on the computer?

  2. How is that you have updated drivers for QUALCOMM Ateros?

  3. what exactly happens when the problem occurs? You receive an error message?

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Also check out the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• HP 15 laptop: wifi does not work windows 8.1

  I have Windows installed pro 8.1. I was using wifi on this laptop, it worked fine. However, recently, I see that the Wifi does not work although he shows me the SSID of my network I used to use and also the SSID of the networks of neighbors. (It means that the wifi on laptop chip is capable of scanning the wifi signals and so it works). The same router from which all other Mobile tablets, my home laptop work are able to connect to the wifi network. Only on this laptop I am facing this problem. What may be a solution or what I should try. I tried the steps listed here http://www.fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-issues-in-windows-8...

  Although I have not changed the default settings only steps above on blog, I tried to solve the problem. However, it did not work. Also keys function + F12 on laptop has no effect. The light on the F12 key is always on. However, it is possible to toggle the wifi in the bar of Windows 8.1 charms.

  What should I check?

  I bought an external USB wifi device that solved the problem.  The card wifi on laptop works well, but for some unknown reason, he is not able to connect to home wifi router. http://www.snapdeal.com/product/leoxsys-150-Mbps-Nano-WiFi/1179610?utm_source=earth_feed&utm_campaign=TopPerformersPLAScaling3000&utm_medium=CPC&utm_content=1179610&utm_term=, & campaignid = 350311165 & 28373951005 = adgroupid & adposition = 1o1 & network = g & device = c & targetid = pla-55251503741

• I would like to know why my hotmail does not work

  I would like to know why my hotmail does not work

  Rex

  I think it might be a problem with Hotmail right now because I have seen numerous amounts of threads, saying "cannot connect to hotmail. You could post your question Hotmail forums below and they will have probably more information about it.

  http://windowslivehelp.com/product.aspx?ProductID=1