Why my Windows Explorer open and close when I try to open a document or picture?

Similar Questions

• SE error message "Windows Explorer has stopped working" when you try to search for document files

  Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

  When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

  Please help me

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.

• Plugin-container constantly opens and closes when I try to access FlashMD stuff.

  When I try to see all the media that requires the plugin-container to start, it starts and then closes immediately and starts again and so on until it's just give up. It does not affect anything else in another browser, then unable to use flash applications, such as youtube videos, other types of services video and flash games. The plugin-container for applications of the unit works fine and is not affected. I tried to reinstall Firefox and reset it, but it did not work.

  Reinstall the flash player resolved all the problems.

• Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

  I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

  An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

  Press Win Logo key + R, type: fsmgmt.msc

  You see your own actions?

  If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I downloaded the 32-bit, Windows 7, Internet, and now when I try to open the file you just downloaded with an MS-DOS screen opens then closes instantly. What should I do?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi Chris.Plucker,
   
  Thank you for using the Microsoft answers Forum
   
  I would like to ask you a few questions to better understand:
   
  (a) you try to open the file from Internet Explorer?
   
  (b) if so, have you tried with other browsers?
   
  (c) from which site did you download Windows 7?
   
  (d) what is the name of the file you want to download?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Follow the steps below to put your computer in a clean boot state:

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. sign the computer by using an account with administrator rights.

  2. click on the Start button, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  3. on the general tab, click Selective startup, and then clear the Startup items load check box. (The box use the Boot file is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click on OK, then restarting.

  Check the link to learn more about the clean boot below:

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click the Start button, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2 in the general tab, click the Normal startup option, and then click on OK.

  3. When you are prompted to restart the computer, click restart.

  Waiting to hear from you

  Thanks and greetings
  Aziz Nadeem - Microsoft Support

• Windows Explorer crashes and restarts when you access an element of Panel of others on a computer that is running Windows 7 or Windows Server 2008 R2

  It's my pc problem, what do I do to fix it?

  It says that I have to choose the right fix or otherwise it will be haarm my system, I just need a step by step help and how to choose the right fix for my problem, thank you!... Wait ill the resp0nse, thanks again...

  Hello

  go to this site:

  http://support.Microsoft.com/kb/978433

  and click on "downloads of patch view and application of ', select the platform (x 86 or x 64), and type your e-mail twice and type in the captcha announcement click request hotfix ."

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now the problem is solved.

  Best regards
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Why my computer turns off and restarts when I try to play the video?

  If I try to play a video, my computer starts, stops and restarts. I tried to find a solution, including Mr. Fix It, nothing helps. I cannot find a quick answer, is there something that I am missing? My camera is an older Windows XP program that crossed a unknown virus attack.

  Did you remove the virus? It looks like his crash. Restart and hold down F8, and then select Disable automatic reboot. The next time it hangs, what we said the blue screen. And if it shows the name of a file or a driver

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• Startup error: RUNDLL error loading C:WINDOWS\melpre.dll AND Windows Explorer error - must close

  RUNDLL says "the specified module could not be found.  This error occurs only on the most operational of our user accounts (we have 4)

  Windows Explorer needs to close happens on each user:

  AppName: explorer.exe AppVer: 6.0.2900.5512 ModName: akagocelozu.dll ModVer: 1.4.0.0 Offset: 00002903

  I am running XP SP3 and I'm trying to recover from multiple virus & malware removed by AVG Free, MBAM, SAS & Spybot. I also used Advanced System Care and AVG PC TuneUp and both of them seem to help.

  I have read other discussions here and tried to run the System File Checker - all that happens is a black window opens for a millisecond and closed.

  I have a lot of questions, but these are my point I suppose to jump.  Thanks in advance :)

  
  

  Your system is currently or has been infected by malware.

  I suggest read you this procedure and do the 2 scans of malware down first, then start at the beginning.

  I read you already ran MBAM and SAS, but make sure that you have run the MBAM and SAS with updated definitions.

  The System File Checker will not help you.  If you want the run later for smile and a good feeling, we can work on that later.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
  .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Whenever I try to open a folder, windows Explorer stops and restarts. How can I open my files?

  When I double click on a folder to open it or try to open it in the start menu, an alert tells me that windows Explorer has to close, and then restart. I can't open the windows. I can open the fine when I'm in safe mode but not in normal startup. I tried to use a restore point, but my computer has not been implemented system restore points. Help!

  It could be Aproblematique with the codecs trying to preview the files. Go to the Control Panel, reports on problems and Solutions, click on "View problem history" on the left pane, scroll down to Windows Explorer, under click twice on the problem that correspond to the date and time that you have encountered the problem. Note the name of the file next to the heading ' fault module name: ', google for the file to see what program it is. Uninstall, update or reinstall the program.

• How can I pay what columns appear on all records when windows Explorer opens?

  original title: Windows Explorer in Vista

  How can I configure how windows Explorer opens?

  How can I pay what columns appear on all records when windows Explorer opens?

  Why vista is so frustrating use?

  Hi SuppyLives,

  You experience problems in the customization of Windows Explorer?

  Method 1: You can run the fixit available in the link below and then check

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us?EntryPoint=lightbox

  Method 2:  You can see the steps provide in the article below

  How to modify your folder view settings or customize a folder
  http://support.Microsoft.com/kb/812003

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  You might want to know

  Work with files and folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders#section_2

  Demo: Working with files and folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-working-with-files-and-folders

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• Double click on files and readers in windows explore open Windows Movie Maker

  Whenever I click on the icon of the Recycle Bin on the desktop or in my computer, my documents, control panel in the start menu, or any folder in my computer windows Explorer open Windows Movie Maker. What is going on?

  I would like to uninstall, reboot, then run microsoft registry cleaner.

  Subsequently, use windows without Director until you absolutely need.

  http://www.bing.com/search?q=uninstall+Movie+Maker+Windows+XP&form=MSNH14&QS=as&SK=AS3&PQ=uninstall+Movie+Maker&SP=4&SC=6-21

  http://OneCare.live.com/site/en-us/article/registry_cleaner_why.htm

• That Windows Explorer open with its extended file tree.

  Is buried the record I work with several layers to the bottom of the tree (Documents > My Documents and so on).  I go immediately by putting the folder in Favorites, but which expand the file tree itself.  Is there a default setting that would make the Windows Explorer opened with its file tree developed to the level that I specify - either the level displayed when I close the program?

  Thank you very much

  Craig

  Hi Craig,.

  What your request is what I get on my machine.  So, I sailed to C:\WINDOWS\SYSTEM32, click Favorites on the left side, click right and choose "Add current location to Favorites".

  What it gave me was SYSTEM32 in my list of favorites, and when I click it it only opens the right pane to this place.

  OK, so for your problem, it doesn't not self-expanding.  You can change this quite easily in the Folder Options.  Open something like the computer, click the arrow next to organize, choose folder and Search Options.  On the general tab, you will see under the Navigation pane option to turn on the self-expanding.  You won't achieve what you want.

  Let me know how you go.

  Kind regards
  Jon

  http://www.insidetheregistry.com

• I use Windows XP SP3 and cannot open My Documents, my pictures, my music and my computer

  Original title: can not open files

  I use Windows XP SP3 and cannot open My Documents, my pictures, my music and my computer. I get no errors, but nothing happens when I click on one of them.

  Hello

  Thanks for the reply. I managed to solve the problem before you receive your advice to defragment my hard drive. I had the problem on / off power for about six months and defragmentation has not always been successful success so when it happens then I will go through the procedures that you have listed. I have installed and uninstalled various applications in the last six months and suspect that the register is not in optimum condition... I have a problem during a shutdown or reboot stop where I get an error of tfswctrl.exe I close and the system then hangs and requires a medical examination. Is there, by chance, a Microsoft utility that cleans up the registry for applications that have been uninstalled, but be persistent pieces that shouldn't be there?

  Thanks again for your advice.