Why my XP Media Center PC does not update the guide?

Similar Questions

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• Windows 7 Windows Media Player 12 does not update the library when I add an item to the library - please help!

  Windows 7 Windows Media Player 12 does not update the library when I add an item to the library, also, when I delete a file from the folder that contains the media player does not remove it from the library. Can you help me please?

  Hello

  For the question, you can also view the following link for more information:

  You cannot view, add, or delete items in the library of Windows Media Player 11

  The steps are also applicable for Windows Media Player 12.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OnImmediateValueChanged cursor does not update the label text by dragging.

  Consider the following:

  Container {
          layout: DockLayout {}
          Label {
              id: label
              textStyle.base: SystemDefaults.TextStyles.BigText
              verticalAlignment: VerticalAlignment.Center
              horizontalAlignment: HorizontalAlignment.Center
          }
  
          Slider {
              fromValue: 0
              toValue: 59
              value: 0
               onImmediateValueChanged: {
                   label.text = value;
               }
          }
      }
  

  When you drag the cursor, it does not update the text of the label smoothly. How can I achieve this?

  Found the solution!

  By mistake I used the value parameter and not immediateValue in the onImmediateValueChanged function!

• the computer does not update the version of Itunes 12.3

  the computer does not update the version of Itunes 12.3

  If your version of Mac OS X 10.6.8 (as shown in your profile information), the latest version of iTunes (12.3.2) requires OS X 10.8.5 or later version.  If an OS X update is required if you run iTunes 12.3.  Your specific model of MacBook Pro determines the supported versions of OS X.

  If you select about this Mac from the Apple menu, click more information, the "model identifier" would help to identify your MacBook Pro model.

• Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9

  Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9.

  How can I solve the problem?

  Hi PaulaCohen,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=1

• Recovery scenario - vote drive does not match the guid of cluster

  Hi all
  
  Think you can not start your guest virtual machines just because it has a corrupted root system.img image. And suppose that it contains 5 physical disk (which are all created by the model CARS) where ASM on them.
  What is the easier recovery of computers scneario virtual comments (RAC)?
  
  Can this be a plausible scenario to retrieve availability? (Assume that both of the RAC system images are corrupted and we do not prefer a level system rather than backup recovery / restore)
  
  1 create 2 RAC instances using the same details of networking and the hostname that is corrupt. -Use the new 5 different drives.
  2 stop the newly created instances. Place the disks for instances newly created using virtual machine Manager.
  3. Add the old records the image system is unable to be corrected, but ASM disks are still in use (since the newly created instances using VM manager.) for newly created instances.
  4. open the newly created instances
  
  We want that the DSO and CRS have been initialized and be opened without problem?
  
  When I try this script I get the error the cssd/crsd shows.
  
  -Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in the voting disk does not match the guid a3eec66a2854ff0bffe784260856f92a cluster obtained from the profile of negotiators.
  -Found 0 files preconfigured voting but 1 vote files are required, endpoint in order to ensure the integrity of the data.
  
  What could be the easiest way of recovery of a virtual machine that has healthy ASM disks but image corrupt system?
  
  Thank you

  Hello

  you have a similar problem, trying to clone data bases with 11.2.
  The problem is that a cluster is identified uniquely, and this information is considered in the OCR and voting disks. So exactly these 2 should not be cloned.

  To achieve what you want, simply configure your system in this way, you have a diskgroup separated for OCR and vote (and ASM spfile), should not be restored in the case of szeanrio.
  Only all files in database in ASM will then be exchanged later.

  Then what you want is possible.
  However, I'm not sure that the RAC models have the ability to install the OCR and vote in a separate diskgroup.

  Concerning
  Sebastian

• The keyboard on the Windows Media Center screen does not appear when I hit the enter keyboard key!

  I searched through the internet trying to find a solution to this annoying problem: after change to enter the registry and the application of the value entered for showOskOnKeyboardEnter under MCE. PerUserSettings, I always have problems serious on-screen keyboard to appear by using the key "Enter" on the keyboard.  I managed only a couple of times to get the OSK to appear among the dozens of attempts, however, I am unable to recreate the actions - is absolutely not stable.  The only area that reacts to the 'Enter' key is looking for music.  All the fields in the section of Netflix and movies search fields are unresponsive.  Not even works tap triple function.  The only compatible and possible way to have the OSK appear is to double click on the field - that does not work given that the goal is to have an IR remote with the Media Center application interface.  The button 'OK' on the remote control is mapped to the Enter key (except if WMC has a key code value for the 'OK' button).  Help, please!

  I had this problem and it was very frustrating.  The posted solution did not work for me initially.  What I've discovered, is that you have closed Media center before editing the registry.  If you change it while it is open it does not pick up the change and then save settings (i.e. with showOskOnKeyboardEnter = 0) when you close.

  Then...
  1 close Media Center.
  2. follow the steps of the posted solution: http://mymce.wordpress.com/2011/04/20/on-screen-keyboard-in-windows-media-center-doesn ' t - appear /
  3. Open Media Center.
  Should work now.

• Am running windows 7 ultimate and my media center window does not work and my system is looking for a solution but that's all!

  I had put my storage system for a little while, now still use it once I have to improve everything that I think that's it at one point, now I got problems, watch videos of any source with continuous buffering, stop and start the content. I had posted a question on this topic and got the answer, not finished it yet, it error C0000135 envolved. Is it possiable that they are all connected to C0000135?

  Hello Stephen,

  1 is this problem limited only by working with Windows Media Center?

  2. are you C0000135 error code of Windows Media Center?

  3. do you get an error message?

  Note: Before going any further I recommend to transfer the files to a secure location on the computer.
  This will remove also all your recordings programmed, so you'll have to re - schedule them.
   
  Method 1. Rename the ehome folder.
  
  a. right-click on "computer" and select "Manage".
  b. under "Services and Applications", you will see 'Services' Open 'Services' and stop "Windows Media Center Scheduler Service" and "Windows Media Center Receiver Service".
  d. rename the directory "C:\ProgramData\Microsoft\eHome.
  e. start the service "Windows Media Center Service Launcher" (this will start two other services properly).
   
  See also:
   
  Playing videos in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/playing-videos-in-Windows-Media-Center-frequently-asked-questions

   
  Method 2:
   

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Provide more information so that we can help you.

• FOR loop does not update the local Variable

  I am newer to labview, and I can't wrap the head around why not a habit of local variable to update in the code if it updates on the dashboard. Anything im missing?

  Assume that you are talking about the local variable of the 'State of the cell. The terminal updates every 500ms in the small top loop, the local variable indicates simply that the indicator and thus updates also.

  The problem is "dataflow" and you need to familiarize yourself with the concept!

  Once the while loop starts, the local variable is reading and inside the loop begins. Most likely, the local variable is read before it is updated in the small loop, so most likely returns the value of a fade on the first iteration of the while loop. Now the small loop continues to go twice per second for about five seconds. Only after the loop FOR (and everything else inside the while loop) completed, the while loop will go to the next iteration, date on which the local variable is read once more, this time with the last value of the last for loop iteration of the previous iteration of the while loop.

  In summary, the local variable updates very well, it's just that the code does not read the new value around most of the time.

  Your VI is full also potential competition conditions caused by the over-use of the local variable. You need to respect the proper execution order by eliminating local variables.

  So what is the solution? Hard to say without knowing what the VI is supposed to do. Most likely, you will need to remove the inside OF the loop and use it outside while loop for everything.

• 18 Firefox does not update the 2013.2.3.1 norton toolbar. is it possible to do it manually?

  I have the latest versions of Firefox and Norton Internet Security, have restarted several times and no still no toolbar Norton. The Add-ons screen does not list the 2013.2.3.1 version, only the previous version that is disabled. Is there a way to force this update?

  Thank you
  Kilgore

  Hello to kilgore, please refer to https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-18-Support-for-Norton-Toolbar/td-p/886714

• Welcome screen does not update the recent list

  For a while, starting VBAI 2010, list "Recent Inspections", paragraph "Configuration control" was not being updated forcing me to use the browse option.  I found the list in the Builder.ini Vision and modified, i.e., lightened in a bit, and while my modification is displayed, VBAI does not refresh the list to display the most recent inspection configured when I close the said inspection.  Any ideas on how to "reset" from the home screen?

  Thank you

  Eric

  Well well apparently edition Vision Builder.ni did the trick after all, but only after I rebooted my workstation... to my delight, my home screen is now updated again.

• problem with the ios certificate server does not update the CRL

  Hi all

  The background is that I'm putting a DMVPN solution with tunnels ipsec between the rays created by using certificates.

  I use a cisco 877 as the CA server (its 12.4 (6) T5) running to provide certificates for the spoke routers. This part works very well - rays can apply for a certificate and get a number very well.

  The problem is CA, life of LCR is set to 24 hours, but the CA is not updated the LCR so when the rays see CRL (as defined in their trustpoint) they point to a mistake that the CRL is obsolete and does not connect.

  If making a ' #sh cryptographic pki server ' it lists a ' CRL NextUpdate timer. It has a timestamp that is 24 hours after the last certificate was revocked. The only way I can get the LCR to be rebuilt must revoke a certificate.

  So, my question is, am I missing something here? I thought that it would automatically generations a new CRL list file every 24 hours.

  Can anyone help?

  Thank you.

  Hey Marc (?)

  This seems to correspond to this bug:

  CSCsy95838    AC IOS: LCR of the not updated, update timer not started

  However, it does not mention if 12.4 (6) T5 is affected, only that it was found 12.4 (15) T3 and resolved to 12.4 (15) T10 and other more recent versions.

  I suggest trying the last 12.4 (15) Tx, 15.0 (1) Mx or 15.1 (4) Mx version if you can.

  I assumed that you have much of it, but just in case: as a workaround, you can disable CRL checking on all routers DMVPN, of course they will still allow connections from routers with a revoked RADIUS.

  As (temporary?) substitute for a Revocation list, you can use a 'certificate ACL' with which you can create kind of a 'local CRL Manual:

    crypto pki certificate map certACL 10    serial-number ne    serial-number ne    etc. 

    crypto pki trustpoint myTP

     match certificate certACL
  
      (note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed) 

  Of course, you would have to configure (and maintain!) participating on each router in the DMVPN so it's heavy, but I guess if you revoke often certs, that it might be an option.
  HTH
  Herbert

  --

  If this post answered your question, please click the button of "right answer".

• FDF does not update the Formdata

  Hello

  in php, I wrote a script smal to generate a fdf file but the form does not display the data. I'm sure that the code is correct and the fields are in the pdf file.

        // getdata.php
        $fdf_out='C:\PHPCode\Medi\results\test1.fdf';
        $pdf_doc='http://localhost/test2.pdf';       
        $outfdf = fdf_create();
        fdf_set_value($outfdf, "Textfeld1", 'mein Text', 0);
        fdf_set_value($outfdf, "DatumsUhrzeitfeld1",date('Y-m-d H:i:s'), 0);
        fdf_set_file($outfdf, $pdf_doc);
        fdf_save($outfdf, $fdf_out);
        fdf_close($outfdf);
        Header("Content-type: application/vnd.fdf");
        $fp = fopen($fdf_out, "r");
        fpassthru($fp);
        unlink("test1.fdf");
  

  after pressing the submitbutton (http://localhost/getdata.php#FDF). I see a data tramsmission but no new data.

  Could I have missed something? Option of LiveCycleDesigner?

  I there a way to debug the component PDF to see what is done?

  Thanks a lot, it's upset me for 2 days now...

  Edgar

  Adobe offers the possibility to create the AcroForms using the FDF file, it is almost obsolete. And there are a lot of web applications that provide a copy of a user form completed in a pdf format that reader users can save by using the FDF file to provide the data and the link to the associated PDF form.

  AcroForms provide features that are not available for forms LiveCycle Designer or LiveCycle Designer must use the Acrobat and Acrobat AcroForms JavaScript object to use these features. XML forms cannot be flattened nor can they get the identity object properties.

  The two products are roughly the same age.

  I just consider it an obsolete product just because there is a different approach.

• af: popuo closing by program does not update the caller

  Hi all
  
  I use jdeveloper 11g and adf business components.
  I have a simple page that displays a database table (a display object). On this table, I need to insert, update, delete operations.
  I sent the following link and was able to create the whole process.
  http://jamessmith73.WordPress.com/SOA-11g-page/ADF-11g-CRUD-operations-on-a-master-detail-table/
  
  For the update feature, I implemented an af popup element that opens the current record as a pop-up and it works fine.
  I should add validation by updating, so the button submit popup, I added my validation code and show the message, I added partialsubmit = true on the submit button.
  Now it shows postings, but even once it is validated, it remains on the pop up, does not close the window.
  To close the window, I added code to popup in my grain of closing.

        StringBuilder script = new StringBuilder();
        FacesContext context =  FacesContext.getCurrentInstance();
             script.append("var popup = AdfPage.PAGE.findComponent('").append("p1").append("'); ")            
                 .append("if (popup.isPopupVisible()) { ").append("popup.hide();}");
             ExtendedRenderKitService erks =
                         Service.getService(context.getRenderKit(), ExtendedRenderKitService.class);
             erks.addScript(context, script.toString());

  After this the pop up is closed but does not show the updated line (even if it's upadted in the comic book), it is the table of the appellant is not refreshed.
  The work around is that I add one more button soemthing like "save" which does not any action involves and just close the pop up and refreshes the page.
  But I don't want the user to have 2 buttons for a single operation, so would like to know if there is any other way to do this.
  In addition, lets say I make a few changes on the form of popup, but click Cancel, the table reflects the changes (no change is made in the comic book)

   <af:commandButton text="Cancel" id="cb8"/>

  To resolve this issue, I added an actionlisterner on the Cancel button that closes the pop-up window, so that the table is not updated with the modified values programmatically.
  But if I click the same link again that fills the popup, inputtext components displays the value that was changed before you click Cancel.
  I don't know how I should resolve this thing, I don't know I'm missing something.
  any help is appreciated.
  Thank you
  Ash

  Update the table in the code to java with addPartialTarget()?
  And if he does not rerun the query of the ViewObject, then refresh.